Hostname: page-component-586b7cd67f-dlnhk Total loading time: 0 Render date: 2024-11-20T11:26:54.763Z Has data issue: false hasContentIssue false
  • English
  • Français

Removal of Pb2+ and Ni2 ions from aqueous media by filtration through clay-based beds

Published online by Cambridge University Press:  09 July 2018

M. J. Ribeiro ,
C. M. Albuquerque  and
J. A. Labrincha
M. J. Ribeiro
Affiliation:
UIDM, ESTG, Polytechnic Institute of Viana do Castelo, 4900-348 Viana do Castelo, Portugal
C. M. Albuquerque
Affiliation:
Ceramics and Glass Engineering Dept., CICECO, University of Aveiro, 3810-193 Aveiro, Portugal
J. A. Labrincha*
Affiliation:
Ceramics and Glass Engineering Dept., CICECO, University of Aveiro, 3810-193 Aveiro, Portugal
*
*E-mail: jal@ua.pt
Get access Rights & Permissions [Opens in a new window]

Abstract

This work examines possible new applications for common, clay-based formulations. We processed spray-dried grains of a common clay (ZA-4) and collected fines/rejects from the production of lightweight aggregates (LWA), which were used as filtration beds for removal of Pb2+ and Ni2+ from aqueous solutions. Experiments were performed at different contaminant concentrations and by testing several operational conditions. The removal performance of both tested materials is strongly dependent on the particle-size distribution of the batch, being better for beds made of smaller grain size, since packing density and specific contact area for removal are greater. In general, the efficiency for removal of Pb2+ was greater than for Ni2+. When compared with granular activated carbon, clay-based beds performed well. In particular, finer fractions of LWA show stable behaviour, without saturation after consecutive runs. Saturated beds can potentially be reused, in appropriate amounts, for production of new lightweight aggregates or common ceramic items (e.g. bricks), since retained contaminants will be fixed by firing in the clay matrix. Calcination of pressed pellets made of contaminated filter grains created consolidated ceramic components and sorbed metallic species became inert.

Keywords

clay-based bedslead removalnickel removalaqueous mediafiltration
Type
Research Article
Information
Clay Minerals , Volume 43 , Issue 4 , December 2008 , pp. 647 - 656
Copyright
Copyright © The Mineralogical Society of Great Britain and Ireland 2008

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

Albuquerque, C. & Labrincha, J.A. (2007) Removal of contaminants from aqueous solutions by beds made of rejects of the lightweight aggregates production. Ceramics International, 34, 1735–1740.Google Scholar
Bailey, S., Olin, T., Bricka, R. & Adrian, D. (1999) A review of potentially low-cost sorbents for heavy metals. Water Research, 33, 2469–2479.CrossRefGoogle Scholar
Boiler, M.A. & Kavanaugh, M.C. (1995) Particle characteristics and headloss increase in granular media filtration. Water Research, 29, 1139–1149.Google Scholar
Budinova, T.K., Gergova, K.M., Petrov, N.V. & Minkova, V.N. (1994) Removal of metal ions from aqueous solution by activated carbons obtained from different raw materials. Journal of Chemical Technology and Biotechnology, 60, 177–182.Google Scholar
Farizoglu, B., Nuhoglu, A., Yildiz, E. & Keskinle, B. (2003) The performance of pumice as a filter bed material under rapid filtration conditions. Filtration and Separation, 40, 41–47.Google Scholar
Hawash, S., El-Abd, H., El-Geundi, M.S., Nassar, M.M. & Farah, J.Y. (1992) Useful adsorption equilibriums by means of natural clay. Adsorption Science and Technology, 9, 231–243.Google Scholar
Ives, K.J. (1975) Specifications for granular filter media. Effluent and Water Treatment Journal, 22, 296–305.Google Scholar
Ives, K.J. (1990) Testing of filter media. Aqua, 39, 144–151.Google Scholar
Johansson, L. (1997) The use of leca (light expanded clay aggregates) for the removal of phosphorous from wastewater. Water Science Technology, 35, 87–93.CrossRefGoogle Scholar
Magalhaes, J.M., Silva, J.E., Castro, F.P. & Labrincha, J.A. (2004) Effect of experimental variables on the inertization of galvanic sludges in clay-based ceramics. Journal of Hazardous Materials, 106, 139–147.Google Scholar
Marquez, G., Ribeiro, M.J., Ventura, J. & Labrincha, J.A. (2004) Removal of nickel from aqueous solutions by clay-based beds. Ceramics International, 30, 111–119.Google Scholar
Pinto, S., Almeida, M., Correia, A.M.S., Labrincha, J.A., Ferreira, V.M. & Rosenbom, K. (2004) Use of recycled materials in buildings and structures. Pp. 771–777 in: Proceedings of International RILEM Conference on the use of recycled materials in buildings and structures, Vol. 2.Google Scholar
Ribeiro, M.J. & Labrincha, J.A. (1998a) Control of geometrical parameters of clay particles processed by spray-drying with relevance in water filtration beds. Industrial Ceramics, 18, 73–79.Google Scholar
Ribeiro, M.J. & Labrincha, J.A. (1998b) Spray-dried calcined clays in water filtration columns used for chromium removal. Colloid and Polymer Science, 276, 723–729.Google Scholar