Hostname: page-component-586b7cd67f-2brh9 Total loading time: 0 Render date: 2024-11-22T11:41:00.875Z Has data issue: false hasContentIssue false

Formation Damage in Sandstones Caused by Clay Dispersion and Migration

Published online by Cambridge University Press:  01 July 2024

D. H. Gray*
Affiliation:
Chevron Research Company, La Habra, California
R. W. Rex
Affiliation:
Chevron Research Company, La Habra, California
*
*Present address: Dept. of Soil Mechanics, Univ. of California, Berkeley, Calif.
Rights & Permissions [Opens in a new window]

Abstract

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the ‘Save PDF’ action button.

X-ray diffraction and electron microscopy were employed in conjunction with core flooding experiments to investigate clay migration phenomena.

Severe water sensitivity or loss of permeability was observed in a suite of sandstones in spite of the almost total absence of montmorillonite or swelling mixed layer clays. Clay migration was found to cause total or partial plugging even in sandstones of 500 millidarcy permeability. Bacterial plugging was ruled out by prefiltering and bactericide treatments of waters.

X-ray diffraction and electron microscopy analyses were performed on the sandstones and produced effluents. The direct cause of damage was displacement of submicroscopic natural clay crystals of needle-shaped mica and hexagonal-shaped kaolinite (Rex, 1965). The mobile clays were identified as authigenic crystals that are present on the pore walls and are dislodged by changes in water chemistry combined with water movement.

Flooding sandstones with alkali metal brines “sensitized” the cores, i.e. triggered clay dispersion upon subsequent flooding with fresh water. Flooding with divalent calcium brine prevented water sensitivity and suppressed the undesirable effect of alkali metal brines. A double layer expansion effect is suggested as the dispersion mechanism.

Type
Research Article
Copyright
Copyright © Clay Minerals Society 1966

References

Dodd, S. G., Conley, F. R. and Barnes, P. M. (1955) Clay minerals in petroleum reservoir sands and water sensitivity effects: Clays and Clay Minerals, Proc. 3rd Conf., Natl. Acad. Sci.—Natl. Res. Council Pub. 395, pp. 221–38.Google Scholar
Foster, M. D. (1955) Relation between composition and swelling in clays: Clays and, Clay Minerals, Proc. 3rd Conf., Natl. Acad. Sci.—Natl. Res. Council Pub. 395, pp. 205220.Google Scholar
Fraser, D. C. (1964) Electrical properties of clay-containing sandstones—Part (B): Amer. Petrol Institute Report No. MT-64-4.Google Scholar
Hewitt, S. N. (1963) Analytical techniques for recognizing water sensitive reservoir rocks: Jour. Petrol. Tech. 15, 813–8.Google Scholar
Johnston, N. and Beeson, C. M. (1945) Water permeability of reservoir sands: Trans. A.I.M.E. 160, 43.Google Scholar
Jones, F. O. (1964) Influence of chemical composition of water on clay blocking of permeability: Jour. Petrol. Tech. 16, 441–6.Google Scholar
Monaghan, P. H., Salathiel, R. E. and Morgan, V. E. (1959) Laboratory studies of formation damage in sands containing clays: Jour. Petrol. Tech. 11, 209–15.Google Scholar
Moore, J. E. (1960) Clay mineralogy problems in oil recovery: Petroleum, Engineer 32, 78101.Google Scholar
Rex, R. W. (1965) Authigenic kaolinite and mica as evidence for phase equilibria at low temperatures: Clays and Clay Minerals, Proc. 13th Conf., Pergamon Press, London, pp. 95104.Google Scholar
Van Olphen, H. (1963) An Introduction to Clay Colloid Chemistry: Interscience, N.Y. , 301 pp.Google Scholar
Von Engelhardt, W. and Tunn, W. S. (1954) The flow of fluids through sandstones: translated by P. Witherspoon, Illinois State Geol. Survey Circular, No. 194 Urbana.Google Scholar
White, E. J., Baptist, O. C. and Land, C. S. (1962) Physical properties and clay mineral contents affecting susceptibility of oil sands to water damage, Powder River Basin, Wyoming: Rept. Invest. No. 6093, U.S. Bureau of Mines, Washington, D.C.Google Scholar