Hostname: page-component-586b7cd67f-2plfb Total loading time: 0 Render date: 2024-11-26T23:29:19.844Z Has data issue: false hasContentIssue false
  • English
  • Français

Mineralogy and Geology of the Maungaparerua Halloysite Deposit in New Zealand

Published online by Cambridge University Press:  01 July 2024

Haydn H. Murray ,
Colin Harvey  and
John M. Smith
Haydn H. Murray
Affiliation:
Department of Geology, Indiana University, Bloomington, IN 47401, U.S.A.
Colin Harvey*
Affiliation:
Department of Geology, Indiana University, Bloomington, IN 47401, U.S.A.
John M. Smith*
Affiliation:
Department of Geology, Indiana University, Bloomington, IN 47401, U.S.A.
*
*New Zealand China Clays, Ltd., Auckland 7, New Zealand
†Yara Engineering Corp., Deepstep, GA 31082, U.S.A.
Rights & Permissions [Opens in a new window]

Abstract

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the ‘Save PDF’ action button.

The Maungaparerua halloysite deposit is located on the North Island of New Zealand some 210 km north of Auckland. The halloysite deposit was formed by hydrothermal alteration of rhyolite flow rocks. Superimposed on the hydrothermally altered halloysite is deep intensive surficial weathering resulting from the humid climate on the extreme tip of the North Island. The deposit has been drilled and the cores have been analyzed mineralogically and chemically. Drilling has shown that the deposit is circular or ovate and covers about 350 acres. The altered rocks contain about 50% quartz and fine amorphous silica and 50% of a mix of halloysite, kaolinite, and allophane with a small amount of plagioclase feldspar in the coarse fraction. The upper 8–30m, with an average of 15m, of the halloysite alteration deposit consists of relatively soft clay. Below this soft clay, which is the result of intense surficial weathering, the clay becomes hard and dense. The halloysite and kaolin from this deposit are mined and beneficiated using wet process techniques of dispersion, centrifugation, leaching, dewatering, and drying. The products are used as filler in paper, paint, and plastics and as a ceramic raw material for producing whiteware and fine china. This deposit is unique in that it contains a very high proportion of halloysite in the clay fraction. The detailed geology, mineralogy, geochemistry, and the physical properties of the clay will be discussed.

Type
Research Article
Information
Clays and Clay Minerals , Volume 25 , Issue 1 , February 1977 , pp. 1 - 5
Copyright
Copyright © Clay Minerals Society 1977

References

Bowen, F. E. (1966) The Parahaki volcanic group and its associated clays; New Zealand Geol. Survey—Report No. 6.Google Scholar
Harvey, C. C. (1967) Rock alteration in the south-east, Whitiangia area, Unpublished M.Sc. Thesis, Univ. of Auckland.Google Scholar
Hashimoto, I. and Jackson, M. L. (1960) Rapid dissolution of allophane and kaolinite–halloysite after dehydration, Clays & Clay Minerals, Proc. 7th Conf. pp. 102–113. Pergamon Press, Oxford.Google Scholar
Longley, J. A. (1973) Rock alteration at Maungaparerua, Northland Unpublished M.Sc. Thesis, Univ. of Auckland.Google Scholar
Ministry of Works Northland Region (1964) National Resources Survey, Part III, 202 pp. R. E. Owen, Government Printer, Wellington, New Zealand.Google Scholar