Hostname: page-component-78c5997874-ndw9j Total loading time: 0 Render date: 2024-11-19T14:21:30.889Z Has data issue: false hasContentIssue false
  • English
  • Français

Experimental system level analysis of a concurrent dual-band power amplifier for WiMAX and WCDMA applications

Published online by Cambridge University Press:  19 March 2009

Alessandro Cidronali ,
Iacopo Magrini ,
Niccolò Giovannelli ,
Massimiliano Mercanti  and
Gianfranco Manes
Alessandro Cidronali*
Affiliation:
Department of Electronics and Telecommunications, University of Florence, V. S. Marta 3, Florence I-50139, Italy. Phone: +39.055.4796411, Fax: +39.055.494569.
Iacopo Magrini
Affiliation:
Department of Electronics and Telecommunications, University of Florence, V. S. Marta 3, Florence I-50139, Italy. Phone: +39.055.4796411, Fax: +39.055.494569.
Niccolò Giovannelli
Affiliation:
Department of Electronics and Telecommunications, University of Florence, V. S. Marta 3, Florence I-50139, Italy. Phone: +39.055.4796411, Fax: +39.055.494569.
Massimiliano Mercanti
Affiliation:
Department of Electronics and Telecommunications, University of Florence, V. S. Marta 3, Florence I-50139, Italy. Phone: +39.055.4796411, Fax: +39.055.494569.
Gianfranco Manes
Affiliation:
Department of Electronics and Telecommunications, University of Florence, V. S. Marta 3, Florence I-50139, Italy. Phone: +39.055.4796411, Fax: +39.055.494569.
*
Corresponding author: A. Cidronali Email: alessandro.cidronali@unifi.it
Get access Rights & Permissions [Opens in a new window]

Abstract

This paper presents a feasibility study for the implementation of a concurrent dual-band power amplifier (PA) design suitable for 1.98 GHz WCDMA and 3.42 GHz WiMAX digital systems. The proposed PA design was compared with a test bed based on a pair of dedicated single-frequency band PAs. The dual-band PA exhibited simultaneous peak output power levels of 24 and 17 dBm in the lower and in the higher bands to maintain ACPR and EVM requirements below 33 dBc and 5%, respectively. The conclusions drawn in the paper justify the design effort of this innovative solution, which is capable of increasing the PAE for concurrent dual-band operation maintaining the performance of more conventional solutions.

Keywords

Dual bandPower amplifierWiMAXWCDMABeyond 3G wireless systems
Type
Original Article
Information
International Journal of Microwave and Wireless Technologies , Volume 1 , Special Issue 2: TARGET , April 2009 , pp. 99 - 107
Copyright
Copyright © Cambridge University Press and the European Microwave Association 2009

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

[1]Steer, M.: Beyond 3G, Microwave Magazine, IEEE, 8, 2007, pp. 76–82.Google Scholar
[2]McCune, E.: High-efficiency, multi-mode, multi-band terminal power amplifiers. IEEE Microwave Mag., 44 (2005), 44–55.CrossRefGoogle Scholar
[3]Abidi, A.: The path to the software defined radio receiver. IEEE J. Solid-State Circuits, 42 (2007), 954–966.CrossRefGoogle Scholar
[4]Bespalko, D.; Messaoudi, N.; Boumaiza, S.: ‘Concurrent dual-band GaN power amplifier with compact micro-strip matching network’ 2008, in IEEE Topical Symp. on Power Amplifier for Wireless Communications, Orlando, Florida, January 21–22, 2008.Google Scholar
[5]Colantonio, P.; Giannini, F.; Giofre, R.; Piazzon, L.: Simultaneous dual-band high efficiency harmonic tuned power amplifier in GaN technology, in European Microwave Integrated Circuit Conf., 8–10 October 2007, pp. 127–130.CrossRefGoogle Scholar
[6]Cidronali, A.; Giovannelli, N.; Magrini, I.; Manes, G.: Compact concurrent dual-band power amplifier for 1.9 GHz WCDMA and 3.52 GHz OFDM wireless systems: design and characterization, in 38th European Microwave Conf., Amsterdam, 27–31 October 2008, 1545–1548.Google Scholar
[7]Gutierrez, H.M.; Gard, K.G.; Steer, M.B.: Nonlinear gain compression in microwave amplifiers using generalized power series analysis and transformation of input statistics. IEEE Trans. Microwave Theory Tech., 48 (2000), 1774–1777.CrossRefGoogle Scholar
[8]Ghanipour, P.; Stapleton, S.; Kim, J.H.: Load-pull characterization sing different digitally modulated stimuli. IEEE Microwave Wireless Compon. Lett., 17 (2007), 400–402.CrossRefGoogle Scholar