Hostname: page-component-78c5997874-8bhkd Total loading time: 0 Render date: 2024-11-17T19:14:59.451Z Has data issue: false hasContentIssue false
  • English
  • Français

Characterization of zinc oxide dye-sensitized solar cell incorporation with single-walled carbon nanotubes

Published online by Cambridge University Press:  10 April 2013

Azimah Omar ,
Huda Abdullah ,
Sahbudin Shaari  and
Mohd Raihan Taha
Azimah Omar
Affiliation:
Department of Electrical, Electronic & System Engineering, Faculty of Engineering & Built Environment, Universiti Kebangsaan Malaysia, 43600 Bangi, Selangor, Malaysia
Huda Abdullah*
Affiliation:
Department of Electrical, Electronic & System Engineering, Faculty of Engineering & Built Environment, Universiti Kebangsaan Malaysia, 43600 Bangi, Selangor, Malaysia
Sahbudin Shaari
Affiliation:
Department of Electrical, Electronic & System Engineering, Photonic Technology Laboratory, Faculty of Engineering & Built Environment, Universiti Kebangsaan Malaysia, 43600 Bangi, Selangor, Malaysia
Mohd Raihan Taha
Affiliation:
Department of Civil & Structural Engineering, Faculty of Engineering & Built Environment, Universiti Kebangsaan Malaysia, 43600 Bangi, Selangor, Malaysia
*
a)Address all correspondence to this author. e-mail: huda@vlsi.eng.ukm.my
Get access

Abstract

Zinc oxide (ZnO)–single-walled carbon nanotubes (SWCNTs) nanocomposite thin films have been grown by chemical bath deposition method. The changes in structural and chemical properties were studied by means of x-ray diffraction, field-emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM) and Fourier transform infrared spectroscopy (FTIR). The average crystallite size of ZnO doped with 0.1 and 0.5 wt% SWCNTs was measured about 14.69 and 17.76 nm, respectively. Texture coefficient of the carbon peak (002) was investigated as more than 3.2995 for ZnO mixed with 0.5 wt% SWCNTs. SEM images revealed the ZnO and SWCNTs entangled between the particles. TEM images estimated the inner and outer diameters of SWCNTs to be about 4.86 and 11.32 nm, respectively. FTIR analysis proved the formation of Zn–O and C bonding in the thin films. The performance of the dye-sensitized solar cells (DSSCs) was found to depend on the loading of SWCNTs. The power conversion efficiency increased from 0.078 to 0.684% after loading with 0.1 wt% SWCNTs. Higher amount of SWCNTs (0.5 wt%) was determined as ineffective in improving the performance of ZnO-based DSSCs.

Keywords

thin filmcrystalphotovoltaic
Type
Articles
Information
Journal of Materials Research , Volume 28 , Issue 13: FOCUS ISSUE: Frontiers in Thin-Film Epitaxy and Nanostructured Materials , 14 July 2013 , pp. 1753 - 1760
Copyright
Copyright © Materials Research Society 2013 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

Abdullah, H., Norazia, M.N., Shaari, S., and Mandeep, J.S.: Influence of post-annealing temperature on the properties exhibited by nanostructured In doped ZnO thin films. Thin Solid Films 518, e174 (2010).CrossRefGoogle Scholar
Ilican, S., Caglar, Y., and Caglar, M.: Preparation and characterization of ZnO thin films deposited by sol-gel spin coating method. J. Optoelectron. Adv. Mater. 10, 2578 (2008).Google Scholar
Peng, D., Chen, X., Wang, Y., Hu, Z., Yu, K., and Zhu, Z.: Temperature-dependent photoluminescence properties of needle-like ZnO nanostructures deposited on carbon nanotubes. Appl. Phys. A 105, 463 (2011).CrossRefGoogle Scholar
He, C., Zheng, Z., Tang, H., Zhao, L., and Lu, F.J.: Electrochemical impedance spectroscopy characterization of electron transport and recombination in ZnO nanorod dye-sensitized solar cells. J. Phys. Chem. C 113, 10322 (2009).CrossRefGoogle Scholar
Akhavan, O., Azimirad, R., and Safa, S.: Functionalized carbon nanotubes in ZnO thin films for photoinactivation of bacteria. Mater. Chem. Phys. 130, 598 (2011).CrossRefGoogle Scholar
Hodes, G.: Semiconductor and ceramic nanoparticle films deposited by chemical bath deposition. Phys. Chem. Chem. Phys. 9, 2181 (2007).CrossRefGoogle ScholarPubMed
Sun, S., Gao, L., and Liu, Y.: Optimization of the cutting process of multi-wall carbon nanotubes for enhanced dye-sensitized solar cells. Thin Solid Films 519, 2273 (2011).CrossRefGoogle Scholar
Ko, Y.H., Kim, M.S., and Yu, J.S.: Structural and optical properties of ZnO nanorods by electrochemical growth using multi-walled carbon nanotube-composed seed layers. Nanoscale Res. Lett. 7, 13 (2012).CrossRefGoogle ScholarPubMed
Zeng, G-Y., Nian, K-S., and Lee, K-Y.: Characteristics of a dye-sensitized solar cell based on an anode combining ZnO nanostructures with vertically aligned carbon nanotubes. Diamond Relat. Mater. 19, 1457 (2010).CrossRefGoogle Scholar
Centi, G. and Perathoner, S.: Carbon nanotubes for sustainable energy applications. ChemSusChem. 4, 913 (2011).CrossRefGoogle ScholarPubMed
Huang, C-S., Yeh, C-Y., Chang, Y-H., Hsieh, Y-M., Ku, C-Y., and Lai, Q-T.: Field emission properties of CNT-ZnO composite materials. Diamond Relat. Mater. 18, 452 (2009).CrossRefGoogle Scholar
Zhu, H., Wei, J., Wang, K., and Wu, D.: Applications of carbon materials in photovoltaic solar cells. Sol. Energy Mater. Sol. Cells 93, 1461 (2009).CrossRefGoogle Scholar
Chang, W-C., Cheng, Y-Y., Yu, W-C., Yao, Y-C., Lee, C-H., and Ko, H-H.: Enhancing performance of ZnO dye-sensitized solar cells by incorporation of multiwalled carbon nanotubes. Nanoscale Res. Lett. 7, 166 (2012).CrossRefGoogle ScholarPubMed
Baviskar, P.K., Zhang, J.B., Gupta, V., Chand, S., and Sankapal, B.R.: Nanobeads of zinc oxide with rhodamine B dye as a sensitizer for dye-sensitized solar cell application. J. Alloys Compd. 510, 33 (2012).CrossRefGoogle Scholar
Shakti, N. and Gupta, P.S.: Structural and optical properties of sol-gel prepared ZnO thin film. Appl. Phys. Res. 2, 19 (2010).CrossRefGoogle Scholar
Rani, S., Suri, P., Shishodia, P.K., and Mehra, R.M.: Synthesis of nanocrystalline ZnO powder via sol-gel route for dye-sensitized solar cells. Sol. Energy Mater. Sol. Cells 92, 1639 (2008).CrossRefGoogle Scholar
Gan, X., Li, X., Gao, X., He, X., and Zhuge, F.: Deposition potential dependence of ZnO-eosin Y hybrid thin films prepared by electrochemical deposition and their photoelectrochemical properties. Mater. Chem. Phys. 114, 920 (2009).CrossRefGoogle Scholar
Karst, N., Rey, G., Doisneau, B., Roussel, H., Deshayes, R., Consonni, V., Ternon, C., and Bellet, D.: Fabrication and characterization of a composite ZnO semiconductor as electron transporting layer in dye-sensitized solar cells. Mater. Sci. Eng., B 176, 653 (2011).CrossRefGoogle Scholar
Yen, C-Y., Lin, Y-F., Liao, S-H., Weng, C-C., Huang, C-C., Hisao, Y-H., Ma, C-C.M., Chang, M-C., Shao, H., Tsai, M-C., Hsieh, C-K., Tsai, C-H., and Weng, F-B.: Preparation and properties of a carbon nanotube-based nanocomposite photoanode for dye-sensitized solar cells. Nanotechnology 19, 375305 (2008).CrossRefGoogle ScholarPubMed
Ariyanto, N.P., Abdullah, H., Syarif, J., Yuliarto, B., and Shaari, S.: Fabrication of zinc oxide based dye-sensitized solar cell by chemical bath deposition. Funct. Mater. Lett. 4, 303 (2010).CrossRefGoogle Scholar
Bitenc, M., Marinsek, M., and Orel, Z.C.: Preparation and characterization of zinc hydroxide carbonate and porous zinc oxide particles. J. Eur. Ceram. Soc. 28, 2915 (2008).CrossRefGoogle Scholar
Samadi, M., Shivaee, H.A., Zanetti, M., Pourjavadi, A., and Moshfegh, A.: Visible light photocatalytic activity of novel MWCNT-doped ZnO electrospun nanofibers. J. Mol. Catal. A: Chem. 359, 42 (2012).CrossRefGoogle Scholar
Chindaduang, A., Duangkaew, P., Pratontep, S., and Tumcharern, G.: Structural, optical and photovoltaic properties of ZnO-MWCNTs electrodes. J. Micro. Soc. Thailand 23, 115 (2009).Google Scholar