Hostname: page-component-78c5997874-xbtfd Total loading time: 0 Render date: 2024-11-19T10:38:56.574Z Has data issue: false hasContentIssue false
  • English
  • Français

Chemically disordered Ni3Al synthesized by high vacuum evaporation

Published online by Cambridge University Press:  31 January 2011

S.R. Harris ,
D.H. Pearson ,
C.M. Garland  and
B. Fultz
S.R. Harris
Affiliation:
Division of Engineering and Applied Science, 138–78, California Institute of Technology, Pasadena, California 91125
D.H. Pearson
Affiliation:
Division of Engineering and Applied Science, 138–78, California Institute of Technology, Pasadena, California 91125
C.M. Garland
Affiliation:
Division of Engineering and Applied Science, 138–78, California Institute of Technology, Pasadena, California 91125
B. Fultz
Affiliation:
Division of Engineering and Applied Science, 138–78, California Institute of Technology, Pasadena, California 91125
Get access

Abstract

Films of chemically disordered fcc Ni3Al were synthesized by the vacuum evaporation of Ni3Al onto room temperature and liquid nitrogen temperature substrates. X-ray diffractometry and transmission electron microscopy showed the material to be single phase with an average grain size of about 4 nm. The formation of the equilibrium L12 ordered phase occurred simultaneously with grain growth at temperatures above 350°C. Differential scanning calorimetry provided ordering enthalpies of 7 kJ/mole and 9 kJ/mole for material evaporated onto room temperature and liquid nitrogen temperature substrates, respectively.

Type
Materials Communications
Information
Journal of Materials Research , Volume 6 , Issue 10 , October 1991 , pp. 2019 - 2021
Copyright
Copyright © Materials Research Society 1991

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1.Corey, C. L. and Lisowsky, B., TMS-AIME 239, 239 (1967).Google Scholar
2.Bremer, F. J., Beyss, M., and Wenzl, H., Phys. Status Solidi (a) 110, 77 (1988).CrossRefGoogle Scholar
3.Cahn, R. W., Siemers, P. A., Geiger, J. E., and Bardhan, P., Acta Metall. 35, 2737 (1987a).CrossRefGoogle Scholar
4.Cahn, R. W., Siemers, P. A., and Hall, E. H., Acta Metall. 35, 2753 (1987b).CrossRefGoogle Scholar
5.Inoue, A., Tomioka, H., and Matsumoto, T., Metall. Trans. A 14, 1367 (1983).CrossRefGoogle Scholar
6.Horton, J. A. and Liu, C. T., Acta Metall. 33, 2191 (1985).CrossRefGoogle Scholar
7.Yavari, A. R. and Bochu, B., Philos. Mag. A59 (3), 697 (1989).CrossRefGoogle Scholar
8.Brimhall, J. L., Kissinger, H. E., and Chariot, L. A., Radiat. Eff. 77, 273 (1983).CrossRefGoogle Scholar
9.Jang, J. S. C. and Koch, C. C., J. Mater. Res. 5, 498 (1990).CrossRefGoogle Scholar
10.West, J. A., Manos, J. T., and Aziz, M. J., in High Temperature Ordered Intermetallic Alloys IV (Mater. Res. Soc. Symp. Proc. 213, Pittsburgh, PA, 1991).Google Scholar
11.Fecht, H. J., Hellstern, E., Fu, Z., and Johnson, W. L., Adv. Powder Metallurgy 1–3, 111 (1989).Google Scholar