Hostname: page-component-cd9895bd7-mkpzs Total loading time: 0 Render date: 2024-12-22T01:54:13.735Z Has data issue: false hasContentIssue false
  • English
  • Français

Crystal structure and size effects on the performance of Li[Ni1/3Co1/3Mn1/3]O2 cathodes

Published online by Cambridge University Press:  17 December 2014

Jianxin Zhu ,
Kevin Yoo ,
Akhila Denduluri ,
Wenting Hou ,
Juchen Guo  and
David Kisailus
Jianxin Zhu
Affiliation:
University of California-Riverside, Material Science and Engineering Program, Riverside, California 92521, United States
Kevin Yoo
Affiliation:
Department of Chemical and Environmental Engineering, University of California-Riverside, Riverside, California 92521, United States
Akhila Denduluri
Affiliation:
Department of Bioengineering, University of California-Riverside, Riverside, California 92521, United States
Wenting Hou
Affiliation:
Department of Chemical and Environmental Engineering, University of California-Riverside, Riverside, California 92521, United States
Juchen Guo
Affiliation:
University of California-Riverside, Material Science and Engineering Program, Riverside, California 92521, United States; and Department of Chemical and Environmental Engineering, University of California-Riverside, Riverside, California 92521, United States
David Kisailus*
Affiliation:
University of California-Riverside, Material Science and Engineering Program, Riverside, California 92521, United States; and Department of Chemical and Environmental Engineering, University of California-Riverside, Riverside, California 92521, United States
*
a)Address all correspondence to this author. e-mail: david@engr.ucr.edu
Get access

Abstract

We have investigated the effects of crystal structure and size of Li[Ni1/3Co1/3Mn1/3]O2 (L333) cathodes on the performance of lithium-ion batteries. Cation ordering and particle sizes were determined as a function of annealing temperature with subsequent electrochemical performance monitored by cyclic voltammetry (CV) and charge–discharge testing. With increasing annealing temperature, L333 exhibits a greater cation ordering, which subsequently benefitted cell performance. However, higher annealing temperatures yielded larger crystal sizes, which resulted in a decrease in high rate discharge capacity and a significant capacity fade. This is attributed to an increase in lattice parameter and volume expansion during cycling, with the largest crystal sizes displaying the most significant structural changes due to the lower strain accommodation.

Keywords

energy storagecrystal growthhydrothermal
Type
Articles
Information
Journal of Materials Research , Volume 30 , Issue 2 , 28 January 2015 , pp. 286 - 294
Copyright
Copyright © Materials Research Society 2015 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

Ohzuku, T. and Makimura, Y.: Layered lithium insertion material of LiCo1/3Ni1/3Mn1/3O2 for lithium-ion batteries. Chem. Lett. 30, 642 (2001).Google Scholar
Choi, J. and Manthiram, A.: Role of chemical and structural stabilities on the electrochemical properties of layered LiNi1/3Mn1/3Co1/3O2 cathodes. J. Electrochem. Soc. 152, A1714 (2005).Google Scholar
Shaju, K.M. and Bruce, P.G.: Macroporous Li(Ni1/3Co1/3Mn1/3)O2: A high-power and high-energy cathode for rechargeable lithium batteries. Adv. Mater. 18, 2330 (2006).Google Scholar
Yabuuchi, N., Makimura, Y., and Ohzuku, T.: Solid-state chemistry and electrochemistry of LiCo1/3Ni1/3Mn1/3O2 for advanced lithium-ion batteries III. Rechargeable capacity and cycleability. J. Electrochem. Soc. 154, A314 (2007).Google Scholar
Lu, Z.H., MacNeil, D.D., and Dahn, J.R.: Layered LiNixCo1-2xMnxO-2 cathode materials for lithium-ion batteries. Electrochem. Solid-State Lett. 4, A200 (2001).Google Scholar
Hwang, B.J., Tsai, Y.W., Carlier, D., and Ceder, G.A.: Combined computational/experimental study on LiNi1/3Co1/3Mn1/3O2 . Chem. Mater. 15, 3676 (2003).Google Scholar
Belharouak, I., Sun, Y.K., Liu, J., and Amine, K.: Li(Ni1/3Co1/3Mn1/3)O2 as a suitable cathode for high power applications. J. Power Sources 123, 247 (2003).CrossRefGoogle Scholar
Ren, H., Mu, X., Huang, Y., Li, Z., Wang, Y., Cai, P., Peng, Z., and Zhou, Y.: Effects of Sn doping on electrochemical characterizations of Li(Ni1/3Co1/3Mn1/3)O2 cathode material. Ionics 16, 497 (2010).Google Scholar
Kim, S.H., Shim, K.B., Han, K.R., and Kim, C-S.: Electrochemical properties of Al doped Li(Ni1/3Co1/3Mn1/3)O2 . In Advances in Nanomaterials and Processing, Pts 1 and 2, Ahn, B.T., Jeon, H., Hur, B.Y., Kim, K., and Park, J.W. eds.; (Trans Tech Publications Ltd., Stafa-Zurich, 2007), Vol. 124–126, pp. 1023–1026.Google Scholar
Yang, S.Y., Wang, X-Y., Liu, Z-L., Chen, Q-Q., Yang, X-K., and Wei, Q-L.: Influence of pretreatment process on structure, morphology and electrochemical properties of Li(Ni1/3Co1/3Mn1/3)O2 cathode material. Trans. Nonferrous Met. Soc. China 21, 1995 (2011).Google Scholar
Lin, B., Wen, Z., Gu, Z., and Huang, S.: Morphology and electrochemical performance of Li(Ni1/3Co1/3Mn1/3)O2 cathode material by a slurry spray drying method. J. Power Sources 175, 564 (2008).Google Scholar
Yun, S.H., Park, K-S., and Park, Y.J.: The electrochemical property of ZrFx-coated Li(Ni1/3Co1/3Mn1/3)O2 cathode material. J. Power Sources 195, 6108 (2010).Google Scholar
Lin, B., Wen, Z., Han, J., and Wu, X.: Electrochemical properties of carbon-coated Li(Ni1/3Co1/3Mn1/3)O2 cathode material for lithium-ion batteries. Solid State Ionics 179, 1750 (2008).Google Scholar
Huang, Y., Chen, J., Cheng, F., Wan, W., Liu, W., Zhou, H., and Zhang, X.: A modified Al2O3 coating process to enhance the electrochemical performance of Li(Ni1/3Co1/3Mn1/3)O2 and its comparison with traditional Al2O3 coating process. J. Power Sources 195, 8267 (2010).Google Scholar
Wu, F., Wang, M., Su, Y., Bao, L., and Chen, S.: A novel method for synthesis of layered LiNi1/3Co1/3Mn1/3O2 as cathode material for lithium-ion battery. J. Power Sources 195, 2362 (2010).Google Scholar
Yabuuchi, N. and Ohzuku, T.: Novel lithium insertion material of LiCo1/3Ni1/3Mn1/3O2 for advanced lithium-ion batteries. J. Power Sources 119, 171 (2003).Google Scholar
Lee, M.H., Kang, Y.J., Myung, S.T., and Sun, Y.K.: Synthetic optimization of Li(Ni1/3Co1/3Mn1/3)O2 via co-precipitation. Electrochim. Acta 50, 939 (2004).Google Scholar
Ding, Y., Zhang, P., Jiang, Y., and Gao, D.: Effect of rare earth elements doping on structure and electrochemical properties of LiNi1/3Co1/3Mn1/3O2 for lithium-ion battery. Solid State Ionics 178, 967 (2007).Google Scholar
Guo, J., Jiao, L.F., Yuan, H., Wang, L.Q., Li, H.X., Zhang, M., and Wang, Y.M.: Effect of structural and electrochemical properties of different Cr-doped contents of Li[Ni1/3Co1/3Mn1/3]O2 . Electrochim. Acta 51, 6275 (2006).Google Scholar
Xie, J., Huang, X., Zhu, Z., and Dai, J.: Hydrothermal synthesis of Li(Ni1/3Co1/3Mn1/3)O2 for lithium rechargeable batteries. Ceram. Int. 36, 2485 (2010).Google Scholar
Venkateswara Rao, C., Leela Mohana Reddy, A., Ishikawa, Y., and Ajayan, P.M.: LiNi1/3Co1/3Mn1/3O2–Graphene composite as a promising cathode for lithium-ion batteries. ACS Appl. Mater. Interfaces 3, 2966 (2011).CrossRefGoogle ScholarPubMed
Guo, R., Shi, P., Cheng, X., and Du, C.: Synthesis and characterization of carbon-coated LiNi1/3Co1/3Mn1/3O2 cathode material prepared by polyvinyl alcohol pyrolysis route. J. Alloys Compd. 473, 53 (2009).Google Scholar
Wang, F., Xiao, S., Chang, Z., Yang, Y., and Wu, Y.: Nanoporous LiNi1/3Co1/3Mn1/3O2 as an ultra-fast charge cathode material for aqueous rechargeable lithium batteries. Chem. Commun. 49, 9209 (2013).Google Scholar
Choi, J. and Manthiram, A.: Investigation of the irreversible capacity loss in the layered LiNi1/3Co1/3Mn1/3O2 cathodes. Electrochem. Solid-State Lett. 8, C102 (2005).Google Scholar
Kabi, S. and Ghosh, A.: Microstructure of Li(Mn1/3Ni1/3Co1/3)O2 cathode material for lithium ion battery: Dependence of crystal structure on calcination and heat-treatment temperature. Mater. Res. Bull. 48, 3405 (2013).Google Scholar
Zhu, J., Vo, T., Li, D., Lu, R., Kinsinger, N.M., Xiong, L., Yan, Y., and Kisailus, D.: Crystal growth of Li(Ni1/3Co1/3Mn1/3)O2 as a cathode material for high-performance lithium ion batteries. Cryst. Growth Des. 12, 1118 (2012).Google Scholar
Atkinson, H.V.: Theories of normal grain-growth in pure single-phase systems. Acta Metall. 36, 469 (1988).CrossRefGoogle Scholar
Weaire, D. and Rivier, N.: SOAP, cells and statistics-random patterns in 2 dimensions. Contemp. Phys. 25, 59 (1984).Google Scholar
Reimers, J.N., Dahn, J.R., Greedan, J.E., Stager, C.V., Liu, G., Davidson, I., and Vonsacken, U.: Spin-glass behavior in the frustrated antiferromagnetic LiNiO2 . J. Solid State Chem. 102, 542 (1993).Google Scholar
Kim, J.M. and Chung, H.T.: Role of transition metals in layered Li[Ni,Co,Mn]O2 under electrochemical operation. Electrochim. Acta 49, 3573 (2004).Google Scholar
Wu, F., Wang, M., Su, Y., and Chen, S.: Surface modification of LiCo1/3Ni1/3Mn1/3O2 with Y2O3 for lithium-ion battery. J. Power Sources 189, 743 (2009).Google Scholar
Gopukumar, S., Chung, K.Y., and Kim, K.B.: Novel synthesis of layered LiNi1/2Mn1/2O2 as cathode material for lithium rechargeable cells. Electrochim. Acta 49, 803 (2004).Google Scholar
He, Y-S., Ma, Z-F., Liao, X-Z., and Jiang, Y.: Synthesis and characterization of submicron-sized LiNi1/3Co1/3Mn1/3O2 by a simple self-propagating solid-state metathesis method. J. Power Sources 163, 1053 (2007).Google Scholar
Lan, Y., Wang, X., Zhang, J., Zhang, J., Wu, Z., and Zhang, Z.: Preparation and characterization of carbon-coated LiFePO4 cathode materials for lithium-ion batteries with resorcinol–formaldehyde polymer as carbon precursor. Powder Technol. 212, 327 (2011).Google Scholar
Zhu, J., Fiore, J., Li, D., Kinsinger, N.M., Wang, Q., DiMasi, E., Guo, J., and Kisailus, D.: Solvothermal synthesis, development, and performance of LiFePO4 nanostructures. Cryst. Growth Des. 13, 4659 (2013).Google Scholar
Gao, P., Li, Y.H., Liu, H.D., Pinto, J., Jiang, X.F., and Yang, G.: Improved high rate capacity and lithium diffusion ability of LiNi1/3Co1/3Mn1/3O2 with ordered crystal structure. J. Electrochem. Soc. 159, A506 (2012).Google Scholar
Hsieh, C-T., Mo, C-Y., Chen, Y-F., and Chung, Y-J.: Chemical-wet synthesis and electrochemistry of LiNi1/3Co1/3Mn1/3O2 cathode materials for Li-ion batteries. Electrochim. Acta 106, 525 (2013).Google Scholar
Wang, W., Ruiz, I., Guo, S.R., Favors, Z., Bay, H.H., Ozkan, M., and Ozkan, C.S.: Hybrid carbon nanotube and graphene nanostructures for lithium ion battery anodes. Nano Energy 3, 113 (2014).Google Scholar
Liu, X.H., Zhong, L., Huang, S., Mao, S.X., Zhu, T., and Huang, J.Y.: Size-dependent fracture of silicon nanoparticles during lithiation. ACS Nano 6, 1522 (2012).Google Scholar
Ge, M., Rong, J., Fang, X., and Zhou, C.: Porous doped silicon nanowires for lithium ion battery anode with long cycle life. Nano Lett. 12, 2318 (2012).Google Scholar
Bower, A.F., Guduru, P.R., and Sethuraman, V.A.: A finite strain model of stress, diffusion, plastic flow, and electrochemical reactions in a lithium-ion half-cell. J. Mech. Phys. Solids 59, 804 (2011).Google Scholar
Zhao, K., Pharr, M., Vlassak, J.J., and Suo, Z.: Fracture of electrodes in lithium-ion batteries caused by fast charging. J. Appl. Phys. 108, 073517 (2010).CrossRefGoogle Scholar