Hostname: page-component-78c5997874-t5tsf Total loading time: 0 Render date: 2024-11-14T11:16:40.874Z Has data issue: false hasContentIssue false
  • English
  • Français

Investigations in Hydrostatic Planar Bearings Compensated by Tapered-Spool Restrictors II: Load Capacity and Static Stiffness

Published online by Cambridge University Press:  15 July 2015

Y. Kang ,
H.-C. Cheng ,
C.-W. Lee  and
S.-Y. Hu
Y. Kang*
Affiliation:
Department of Mechanical Engineering, Chung Yuan Christian University, Chung-Li, Taiwan
H.-C. Cheng
Affiliation:
Department of Mechanical Engineering, Chung Yuan Christian University, Chung-Li, Taiwan
C.-W. Lee
Affiliation:
Department of International Business, Chung Yuan Christian University, Chung-Li, Taiwan
S.-Y. Hu
Affiliation:
Department of Mechanical Engineering, Chung Yuan Christian University, Chung-Li, Taiwan
*
*Corresponding author (yk@cycu.edu.tw)
Get access

Abstract

This study including two parts investigates the influence of design parameters of tapered-spool restrictors and hydrostatic planar bearing on static characteristics of load capacity and static stiffness. The former part provides guides for the design of single-action and double-action tapered-spool restrictors. This part provides design guides for planar hydrostatic bearing and for matching up with tapered-spool restrictor. The equations of flow continuity are utilized to determine the film thickness for open-type planar bearing and worktable displacement for closed-type planar bearing with respect to the recess pressure, respectively. The load capacity can be obtained by multiplying recess pressure by effective area of bearing pad. Furthermore, the static stiffness can be obtained by differentiating the recess pressure with respect to film thickness or worktable displacement. The finding results give that the usage range of recess pressure, and the availability ranges of design parameters of restrictor and bearing parameters. Which are found for getting the maximum stiffness.

Keywords

Tapered-Spool RestrictorWorktable DisplacementHydrostatic BearingLoad CapacityStatic Stiffness
Type
Research Article
Information
Journal of Mechanics , Volume 32 , Issue 1 , February 2016 , pp. 71 - 82
Copyright
Copyright © The Society of Theoretical and Applied Mechanics, R.O.C. 2016 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1.Rippel, H. C., Cast Bronze Hydrostatic Bearing Design Manual, Cast Bronze Bearing Institute, Inc., Cleveland, Ohio (1964).Google Scholar
2.Bassani, R. and Piccigallo, B., Hydrostatic Lubrication, Elsevier, Science Publishers B. V., Amsterdam, Netherlands (1992).Google Scholar
3.Rowe, W.-B., Hydrostatic, Aerostatic and Hybrid Bearing Design, Butterworth-Heinemann of Elsevier, Amsterdam (2012).Google Scholar
4.Garg, H.-C., Sharda, H.-B. and Kumar, V., “On The Design and Development of Hydrid Journal Bearings: A Review,” Tribotest, 12, pp. 1–19 (2006).Google Scholar
5.Bassani, R., “Hydrostatic Systems Supplied Through Flow Dividers,” Tribology International, 34, pp. 25–38 (2001).Google Scholar
6.Kang, Y., Chen, C.-H., Lee, H.-H., Hung, Y.-H. and Hsiao, S.-T., “Design for Static Stiffness of Hydrostatic Bearings: Single-Action Variable Compensations,” Industrial Lubrication and Tribology, 63, pp. 103–118 (2011).Google Scholar
7.Kang, Y., Yang, D.-W., Hu, S.-Y., Hung, Y.-H., Peng, D.-X. and Chen, S.-K., “Design for Stiffness of Hydrostatic Bearings: Double-Action Variable Compensation of Spool-Type Restrictors,” Industrial Lubrication and Tribology, 66, pp. 83–99 (2014).Google Scholar
8.Kang, Y., Cheng, H.-C., Lee, C.-W., Hu, S.-Y. and Wang, T.-P., “Investigations in Hydrostatic Planar Bearings Compensated by Tapered-Spool Restrictors I : Flow Rate,” Journal of Mechanics (in press).Google Scholar