Hostname: page-component-586b7cd67f-dsjbd Total loading time: 0 Render date: 2024-11-23T04:17:00.371Z Has data issue: false hasContentIssue false
  • English
  • Français

Thermo-Mechanical Multiscale Modeling in Plasticity of Metals Using Small Strain Theory

Published online by Cambridge University Press:  25 May 2017

N. Munjas ,
M. Čanađija  and
J. Brnić
N. Munjas*
Affiliation:
Department of Engineering MechanicsFaculty of EngineeringUniversity of RijekaRijeka, Croatia
M. Čanađija
Affiliation:
Department of Engineering MechanicsFaculty of EngineeringUniversity of RijekaRijeka, Croatia
J. Brnić
Affiliation:
Department of Engineering MechanicsFaculty of EngineeringUniversity of RijekaRijeka, Croatia
*
*Corresponding author (nmunjas@riteh.hr)
Get access

Abstract

A numerical coupled thermoplasticity multiscale procedure for small strain analysis is developed in the finite element environment. It is suitable for simulation of thermo-mechanical behavior and overall response of metallic materials, using standard approximation method based on the concept of representative volume element (RVE). The local level isothermal analysis that models the micro-scale, is fully coupled to the global level non-isothermal analysis. The global macro-scale tangent stiffness operator is obtained using numerical differentiation procedure using the forward difference scheme. The numerical procedure is developed for two-dimensional problems, using Abaqus user-defined subroutines. Applicability of the proposed framework is presented on several representative examples.

Keywords

Multiscale modelingSmall-strain theoryCoupled thermo-mechanical analysisThermo-plasticity
Type
Research Article
Information
Journal of Mechanics , Volume 34 , Issue 5 , October 2018 , pp. 579 - 589
Copyright
Copyright © The Society of Theoretical and Applied Mechanics 2018 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Taylor, G. I. and Quinney, H., “The Latent Energy Remaining in a Metal after Cold Working,” Proceedings of the Royal Society of London A: Mathematical, Physical and Engineering Sciences, 143, pp. 307–326 (1934).Google Scholar
2. Mason, J., Rosakis, A. and Ravichandran, G., “On The Strain and Strain Rate Dependence of the Fraction of Plastic Work Converted to Heat: an Experimental Study Using High Speed Infrared Detectors and the Kolsky Bar,” Mechanics of Materials, 17, pp. 135–145 (1994).Google Scholar
3. Rosakis, P., Rosakis, A. J., Ravichandran, G. and Hodowany, J., “A Thermodynamic Internal Variable Model for the Partition of Plastic Work into Heat and Stored Energy in Metals,” Journal of the Mechanics and Physics of Solids, 48, pp. 581–607 (2000).Google Scholar
4. Suquet, P. M., “Local and Global Aspects in the Mathematical Theory of Plasticity,” Plasticity Today: Modelling, Methods and Applications, Sawczuk, A. and Bianchi, G., eds., Elsevier Applied Science, London, pp. 279–310 (1985).Google Scholar
5. Suquet, P. M., “Elements of Homogenization for Inelastic Solid Mechanics,” Homogenization Techniques for Composite Media, Lecture Notes in Physics, 272, Sanchez-Palencia, E. and Zaoui, A., eds., Springer-Verlag, Berlin, pp. 193–278 (1987).Google Scholar
6. Terada, K., Ito, T. and Kikuchi, N., “Characterization of the Mechanical Behaviors of Solid-Fluid Mixture by the Homogenization Method,” Computer Methods in Applied Mechanics and Engineering, 153, pp. 223–257 (1998).Google Scholar
7. Feyel, F. and Chaboche, J. L., “FE2 Multiscale Approach for Modelling the Elastoviscoplastic Behaviour of Long Fibre SiC/Ti Composite Materials,” Computer Methods in Applied Mechanics and Engineering, 183, pp. 309–330 (2000).Google Scholar
8. Özdemir, I., Brekelmans, W. A. M. and Geers, M. G. D., “FE2 Computational Homogenization for the Thermo-Mechanical Analysis of Heterogeneous Solids,” Computer Methods in Applied Mechanics and Engineering, 198, pp. 602–613 (2008).Google Scholar
9. Tchalla, A., Belouettar, S., Makradi, A. and Zahrouni, H., “An ABAQUS Toolbox for Multiscale Finite Element Computation,” Composites Part B: Engineering, 52, pp. 323–333 (2013).Google Scholar
10. Kouznetsova, V. G., “Computational Homogenization for the Multi-Scale Analysis of Multi-Phase Materials,” Ph.D. Dissertation, Technische Universiteit Eindhoven, Eindhoven, Nedherlands (2002).Google Scholar
11. Kouznetsova, V. G., Geers, M. G. D. and Brekelmans, W. A. M., “Multi-Scale Second-Order Computational Homogenization of Multi-Phase Materials: a Nested Finite Element Solution Strategy,” Computer Methods in Applied Mechanics and Engineering, 193, pp. 5525–5550 (2004).Google Scholar
12. Luscher, D. J., McDowell, D. L. and Bronkhorst, C. A., “A Second Gradient Theoretical Framework for Hierarchical Multiscale Modeling of Materials,” International Journal of Plasticity, 26, pp. 1248–1275 (2010).Google Scholar
13. Miehe, C., Schröder, J. and Schotte, J., “Computational Homogenization Analysis in Finite Plasticity Simulation of Texture Development in Polycrystalline Materials,” Computer Methods in Applied Mechanics and Engineering, 171, pp. 387–418 (1999).Google Scholar
14. Miehe, C., “Numerical Computation of Algorithmic (Consistent) Tangent Moduli in Large-Strain Computational Inelasticity,” Computer Methods in Applied Mechanics and Engineering, 134, pp. 223–240 (1996).Google Scholar
15. Celigoj, C. C., “Thermomechanical Homogenization Analysis of Axisymmetric Inelastic Solids at Finite Strains Based on an Incremental Minimization Principle,” International Journal for Numerical Methods in Engineering, 71, pp. 102–126 (2007).Google Scholar
16. Temizer, I. and Wriggers, P., “Homogenization in Finite Thermoelasticity,” Journal of the Mechanics and Physics of Solids, 59, pp. 344–372 (2011).Google Scholar
17. Marsden, J. E. and Hughes, T. J. R., Mathematical Foundations of Elasticity, 1st Edition, Prentice Hall, New York (1983).Google Scholar
18. Lemaitre, J. and Chaboche, J. L., Mechanics of Solid Materials, 1st Edition, Cambridge University Press, New York (1990).Google Scholar
19. Simo, J. C., “Numerical Analysis and Simulation of Plasticity,” Handbook of Numerical Analysis, 6, Ciarlet, P. G. and Lions, J. L., eds., Elsevier, Amsterdam (1998).Google Scholar
20. Hill, R., “Elastic Properties of Reinforced Solids: Some Theoretical Principles,” Journal of the Mechanics and Physics of Solids, 11, pp. 357–372 (1963).Google Scholar
21. Hill, R., “On Constitutive Macro-Variables for Heterogeneous Solids at Finite Strain,” Proceedings of the Royal Society of London A: Mathematical, Physical and Engineering Sciences, 326, pp. 131–147 (1972).Google Scholar
22. Kouznetsova, V. G., Geers, M. G. D. and Brekelmans, W. A. M., “Computational Homogenisation for Non-Linear Heterogeneous Solids,” Multiscale Modeling in Solid Mechanics: Computational Approaches, Galvanetto, U. and Aliabadi, M. H., eds., Imperial College Press, London, pp. 1–42 (2010).Google Scholar
23. Terada, K., Hori, M., Kyoya, T. and Kikuchi, N., “Simulation of the Multi-Scale Convergence in Computational Homogenization Approaches,” International Journal of Solids and Structures, 37, pp. 2285–2311 (2000).Google Scholar
24. van der Sluis, O., Schreurs, P. J. G., Brekelmans, W. A. M. and Meijer, H. E. H., “Overall Behaviour of Heterogeneous Elastoviscoplastic Materials: Effect of Microstructural Modelling,” Mechanics of Materials, 32, pp. 449–462 (2000).Google Scholar
25. Miehe, C., Schröder, J. and Becker, M., “Computational Homogenization Analysis in Finite Elasticity: Material and Structural Instabilities on the Microand Macro-Scales of Periodic Composites and their Interaction,” Computer Methods in Applied Mechanics and Engineering, 191, pp. 4971–5005 (2002).Google Scholar
26. Abaqus Documentation V6.14, Dassault Systèmes, Providence, RI, U.S.A. (2014).Google Scholar
27. Wriggers, P., Nonlinear Finite Element Methods, 1st Edition, Springer, Berlin (2008).Google Scholar
28. Owen, D. R. J. and Hinton, E., Finite Elements in Plasticity: Theory and Practice, 1st Edition, Pineridge Press Limited, Swansea (1980).Google Scholar