The high cost of inertial units is the main obstacle for their inclusion in precision navigation systems to support a variety of application areas. Standard inertial navigation systems (INS) use precise gyro and accelerometer sensors; however, newer inertial devices with compact, lower precision sensors have become available in recent years. This group of instruments, called motion sensors, is six to eight times less costly than a standard INS. Given their weak stand-alone accuracy and poor run-to-run stability, such devices are not usable as sole navigation systems. Even the integration of a motion sensor into a navigation system as a supporting device requires the development of non-traditional approaches and algorithms. The objective of this paper is to assess the feasibility of using a motion sensor, specifically the MotionPak™, integrated with DGPS and DGLONASS information, to provide accurate position and attitude information, and to assess its capability to bridge satellite outages for up to 20 seconds. The motion sensor has three orthogonally mounted ‘solid-state’ micro- machined quartz angular rate sensors, and three high performance linear servo accelerometers mounted in a compact, rugged package. Advanced algorithms are used to integrate the GPS and motion sensor data. These include INS error damping, calculated platform corrections using DGPS (or DGPS/DGLONASS) output, velocity correction, attitude correction and error model estimation for prediction. This multi-loop algorithm structure is very robust, which guarantees a high level of software reliability. Vehicular and aircraft test trials were conducted with the system in land vehicle mode and the results are discussed. Simulated outages in GPS availability were made to assess the bridging accuracy of the system. Results show that a bridging accuracy of up to 3 m after 10 seconds in vehicular mode and a corresponding accuracy of 6 m after 20 seconds in aircraft mode can be obtained, depending on vehicle dynamics and the specific MotionPak™ unit used. The attitude accuracy was on the order of 22 to 25 arcmin for roll and pitch, and about 44 arcmin for heading.