We propose an algorithm for encoding linear kinetic plasma problems in quantum circuits. The focus is on modelling electrostatic linear waves in a one-dimensional Maxwellian electron plasma. The waves are described by the linearized Vlasov–Ampère system with a spatially localized external current that drives plasma oscillations. This system is formulated as a boundary-value problem and cast in the form of a linear vector equation $\boldsymbol {A}{\boldsymbol{\psi} } = \boldsymbol {b}$ to be solved by using the quantum signal processing algorithm. The latter requires encoding of matrix $\boldsymbol {A}$ in a quantum circuit as a sub-block of a unitary matrix. We propose how to encode $\boldsymbol {A}$ in a circuit in a compressed form and discuss how the resulting circuit scales with the problem size and the desired precision.

An overview of the neutral beam injectors developed at the Budker Institute of Nuclear Physics in Novosibirsk during the last 10 years is presented. These neutral injectors are used for plasma diagnostics, heating and current drive in modern fusion devices with magnetic confinement. An arc or a radio-frequency (RF) discharge generates a plasma in the ion sources of the injectors, and a positive hydrogen or deuterium ion beam is extracted and accelerated by a multiaperture ion-optical system (IOS). The accelerated ion beam is converted into a neutral one in a gas target. The precision multiaperture IOS with spherically concave electrodes provides ballistic focusing of the neutral beam. The high-energy, high-power beam injector based on negative ions, which is currently under development, is described as well. It comprises a RF negative ion source and a wide-aperture electrostatic accelerator separated from the source by a low-energy beam transport line, thereby improving the injector reliability.

We present a stellarator configuration optimized for a large threshold (‘critical gradient’) for the onset of the ion temperature gradient (ITG) driven mode, which achieves the largest critical gradient we have seen in any stellarator. Above this threshold, gyrokinetic simulations show that the configuration has low turbulence levels over an experimentally relevant range of the drive strength. The applied optimization seeks to maximize the drift curvature, leading to enhanced local-shear stabilization of toroidal ITG modes, and the associated turbulence. These benefits are combined with excellent quasi-symmetry, yielding low neoclassical transport and vanishingly small alpha particle losses. Analysis of the resulting configuration suggests a trade-off between magnetohydrodynamic (MHD) and ITG stability, as the new configuration possesses a vacuum magnetic hill.

Linearized gravity around a rotating black hole or compact object introduces the concept of a gravitomagnetic field, which originates from the matter–current in the rotating object. Plasma in proximity to this object is subsequently subjected to motion guided by this gravitomagnetic term (where mass serves as the effective charge) in addition to the conventional magnetic field. Such an interplay of fields complicates the accessible plasma waves of the system and thus merits exploration to delineate this interplay, to identify any observable signatures of the gravitomagnetic field in weakly magnetized systems, and to motivate future numerical work in a fully relativistic setting where the effects may be stronger. In this work we analyse the dispersion of the upper and lower hybrid electrostatic waves in a plasma immersed in both magnetic and gravitomagnetic fields. In particular, we discuss the effective augmentation or cancellation of the two fields under the right conditions for the upper hybrid wave. In contrast, the lower hybrid wave experiences a frequency up-shift from the gravitomagnetic field regardless of whether it is parallel or antiparallel to the magnetic field for the studied field strengths.

The available energy of a plasma is defined as the maximum amount by which the plasma energy can be lowered by volume-preserving rearrangements in phase space, so-called Gardner restacking. A general expression is derived for the available energy of a nearly homogeneous plasma and is shown to be closely related to the Helmholtz free energy, which it can never exceed. A number of explicit examples are given.

Our earth is immersed in the near-earth space plasma environment, which plays a vital role in protecting our planet against the solar-wind impact and influencing space activities. It is significant to investigate the physical processes dominating the environment, for deepening our scientific understanding of it and improving the ability to forecast the space weather. As a crucial part of the National Major Scientific and Technological Infrastructure–Space Environment Simulation Research Infrastructure (SESRI) in Harbin, the Space Plasma Environment Research Facility (SPERF) builds a system to replicate the near-earth space plasma environment in the laboratory. The system aims to simulate the three-dimensional (3-D) structure and processes of the terrestrial magnetosphere for the first time in the world, providing a unique platform to reveal the physics of the 3-D asymmetric magnetic reconnection relevant to the earth's magnetopause, wave–particle interaction in the earth's radiation belt, particles’ dynamics during the geomagnetic storm, etc. The paper will present the engineering design and construction of the near-earth space plasma simulation system of the SPERF, with a focus on the critical technologies that have been resolved to achieve the scientific goals. Meanwhile, the possible physical issues that can be studied based on the apparatus are sketched briefly. The earth-based system is of great value in understanding the space plasma environment and supporting space exploration.

The Vlasov–Maxwell equations provide an ab initio description of collisionless plasmas, but solving them is often impractical because of the wide range of spatial and temporal scales that must be resolved and the high dimensionality of the problem. In this work, we present a quantum-inspired semi-implicit Vlasov–Maxwell solver that uses the quantized tensor network (QTN) framework. With this QTN solver, the cost of grid-based numerical simulation of size $N$ is reduced from $O(N)$ to $O(\text {poly}(D))$, where $D$ is the ‘rank’ or ‘bond dimension’ of the QTN and is typically set to be much smaller than $N$. We find that for the five-dimensional test problems considered here, a modest $D=64$ appears to be sufficient for capturing the expected physics despite the simulations using a total of $N=2^{36}$ grid points, which would require $D=2^{18}$ for full-rank calculations. Additionally, we observe that a QTN time evolution scheme based on the Dirac–Frenkel variational principle allows one to use somewhat larger time steps than prescribed by the Courant–Friedrichs–Lewy constraint. As such, this work demonstrates that the QTN format is a promising means of approximately solving the Vlasov–Maxwell equations with significantly reduced cost.

In a recent publication (Toler et al., J. Plasma Phys., vol. 89, issue 2, 2023, p. 905890210), we demonstrated that for axisymmetric geometries, the Kapur–Rokhlin quadrature rule provided an efficient and high-order accurate method for computing the normal component, on the plasma surface, of the magnetic field due to the toroidal current flowing in the plasma, via the virtual-casing principle. The calculation was indirect, as it required the prior computation of the magnetic vector potential from the virtual-casing principle, followed by the computation of its tangential derivative by Fourier differentiation, to obtain the normal component of the magnetic field. Our approach did not provide the other components of the virtual-casing magnetic field. In this letter, we show that a more direct and more general approach is available for the computation of the virtual-casing magnetic field. The Kapur–Rokhlin quadrature rule accurately calculates the principal value integrals in the expression for all the components of the magnetic field on the plasma boundary, and the numerical error converges at a rate nearly as high as the indirect method we presented previously.

Collisions are an important dissipation mechanism in plasmas. When approximating collision operators numerically, it is important to preserve their mathematical structure in order to retain the laws of thermodynamics at the discrete level. This is particularly challenging when considering particle methods. A simple but commonly used collision operator is the Lenard–Bernstein operator, or its modified energy- and momentum-conserving counterpart. In this work, we present a macro-particle discretisation of this operator that is provably energy and momentum preserving.

Understanding the partitioning of turbulent energy between ions and electrons in weakly collisional plasmas is crucial for the accurate interpretation of observations and modelling of various astrophysical phenomena. Many such plasmas are ‘imbalanced’, wherein the large-scale energy input is dominated by Alfvénic fluctuations propagating in a single direction. In this paper, we demonstrate that when strongly-magnetised plasma turbulence is imbalanced, nonlinear conservation laws imply the existence of a critical value of the electron plasma beta (the ratio of the thermal to magnetic pressures) that separates two dramatically different types of turbulence in parameter space. For betas below the critical value, the free energy injected on the largest scales is able to undergo a familiar Kolmogorov-type cascade to small scales where it is dissipated, heating electrons. For betas above the critical value, the system forms a ‘helicity barrier’ that prevents the cascade from proceeding past the ion Larmor radius, causing the majority of the injected free energy to be deposited into ion heating. Physically, the helicity barrier results from the inability of the system to adjust to the disparity between the perpendicular-wavenumber scalings of the free energy and generalised helicity below the ion Larmor radius; restoring finite electron inertia can annul, or even reverse, this disparity, giving rise to the aforementioned critical beta. We relate this physics to the ‘dynamic phase alignment’ mechanism (that operates under yet lower beta conditions and in pair plasmas), and characterise various other important features of the helicity barrier, including the nature of the nonlinear wavenumber-space fluxes, dissipation rates, and energy spectra. The existence of such a critical beta has important implications for heating, as it suggests that the dominant recipient of the turbulent energy, ions or electrons, can depend sensitively on the characteristics of the plasma at large scales.

The main emphasis of the Laser Ion Generation, Handling and Transport (LIGHT) beamline at GSI Helmholtzzentrum für Schwerionenforschung GmbH are phase-space manipulations of laser-generated ion beams. In recent years, the LIGHT collaboration has successfully generated and focused intense proton bunches with an energy of 8 MeV and a temporal duration shorter than 1 ns (FWHM). An interesting area of application that exploits the short ion bunch properties of LIGHT is the study of ion-stopping power in plasmas, a key process in inertial confinement fusion for understanding energy deposition in dense plasmas. The most challenging regime is found when the projectile velocity closely approaches the thermal plasma electron velocity ($v_{i}\approx v_{e,\text {th}}$), for which existing theories show high discrepancies. Since conclusive experimental data are scarce in this regime, we plan to conduct experiments on laser-generated plasma probed with ions generated with LIGHT at a higher temporal resolution than previously achievable. The high temporal resolution is important because the parameters of laser-generated plasmas are changing on the nanosecond time scale. To meet this goal, our recent studies have dealt with ions of lower kinetic energies. In 2021, laser accelerated carbon ions were transported with two solenoids and focused temporally with LIGHT's radio frequency cavity. A bunch length of 1.2 ns (FWHM) at an energy of 0.6 MeV u$^{-1}$ was achieved. In 2022, protons with an energy of 0.6 MeV were transported and temporally compressed to a bunch length of 0.8 ns. The proton beam was used to measure the energy loss in a cold foil. Both the ion and proton beams will also be employed for energy loss measurements in a plasma target.

We present a theoretical analysis of electron pitch-angle scattering by ion-acoustic electrostatic fluctuations present in the Earth's bow shock and, presumably, collisionless shocks in general. We numerically simulate electron interaction with a single wave packet to demonstrate the scattering through phase bunching and phase trapping and quantify electron pitch-angle scattering in dependence on the wave amplitude and wave normal angle to the local magnetic field. The iterative mapping technique is used to model pitch-angle scattering of electrons by a large number of wave packets, which have been reported in the Earth's bow shock. Assuming that successive electron scatterings are not correlated, we revealed that the long-term dynamics of electrons is diffusive. The diffusion coefficient depends on the ratio $\varPhi _0/W$ between the wave packet amplitude and electron energy, $D\propto (\varPhi _0/W)^{\nu }$. A quasi-linear scaling ($\nu \approx 2$) is observed for sufficiently small wave amplitudes, $\varPhi _0\lesssim 10^{-3}W$, while the diffusion is nonlinear ($1<\nu <2$) above this threshold. We show that pitch-angle diffusion of ${\lesssim }1$ keV electrons in the Earth's bow shock can be nonlinear. The corresponding diffusion coefficient scales with the intensity $E_{w}^{2}$ of the electrostatic fluctuations in a nonlinear fashion, $D\propto E_{w}^{\nu }$ with $\nu <2$, while its expected values in the Earth's bow shock are $D\sim 0.1\unicode{x2013}100$ $(T_{e}/W)^{\nu -1/2}\,{\rm rad}^{2}\,{\rm s}^{-1}$. We speculate that in the Earth's quasi-perpendicular bow shock the stochastic shock drift acceleration mechanism with pitch-angle scattering provided by the electrostatic fluctuations can contribute to the acceleration of thermal electrons up to approximately 1 keV. The potential effects of a finite perpendicular coherence scale of the wave packets on the efficiency of electron scattering are discussed.

The quantum three-wave interaction, the lowest-order nonlinear interaction in plasma physics, describes energy–momentum transfer between three resonant waves in the quantum regime. We describe how it may also act as a finite-degree-of-freedom approximation to the classical three-wave interaction in certain circumstances. By promoting the field variables to operators, we quantize the classical system, show that the quantum system has more free parameters than the classical system and explain how these parameters may be selected to optimize either initial or long-term correspondence. We then numerically compare the long-time quantum–classical correspondence far from the fixed point dynamics. We discuss the Poincaré recurrence of the system and the mitigation of quantum scrambling.

We describe the interaction of parallel-propagating Alfvén waves with ion-acoustic waves and other Alfvén waves, in magnetized, high-$\beta$ collisionless plasmas. This is accomplished through a combination of analytical theory and numerical fluid simulations of the Chew–Goldberger–Low (CGL) magnetohydrodynamic (MHD) equations closed by Landau-fluid heat fluxes. An asymptotic ordering is employed to simplify the CGL-MHD equations and derive solutions for the deformation of an Alfvén wave that results from its interaction with the pressure anisotropy generated either by an ion-acoustic wave or another, larger-amplitude Alfvén wave. The difference in time scales of acoustic and Alfvénic fluctuations at high-$\beta$ means that interactions that are local in wavenumber space yield little modification to either mode within the time it takes the acoustic wave to Landau damp away. Instead, order-unity changes in the amplitude of Alfvénic fluctuations can result after interacting with frequency-matched acoustic waves. Additionally, we show that the propagation speed of an Alfvén-wave packet in an otherwise homogeneous background is a function of its self-generated pressure anisotropy. This allows for the eventual interaction of separate co-propagating Alfvén-wave packets of differing amplitudes. The results of the CGL-MHD simulations agree well with these predictions, suggesting that theoretical models relying on the interaction of these modes should be reconsidered in certain astrophysical environments. Applications of these results to weak Alfvénic turbulence and to the interaction between the compressive and Alfvénic cascades in strong, collisionless turbulence are also discussed.

Many stellarator coil design problems are plagued by multiple minima, where the locally optimal coil sets can sometimes vary substantially in performance. As a result, solving a coil design problem a single time with a local optimization algorithm is usually insufficient and better optima likely do exist. To address this problem, we propose a global optimization algorithm for the design of stellarator coils and outline how to apply box constraints to the physical positions of the coils. The algorithm has a global exploration phase that searches for interesting regions of design space and is followed by three local optimization algorithms that search in these interesting regions (a ‘global-to-local’ approach). The first local algorithm (phase I), following the globalization phase, is based on near-axis expansions and finds stellarator coils that optimize for quasisymmetry in the neighbourhood of a magnetic axis. The second local algorithm (phase II) takes these coil sets and optimizes them for nested flux surfaces and quasisymmetry on a toroidal volume. The final local algorithm (phase III) polishes these configurations for an accurate approximation of quasisymmetry. Using our global algorithm, we study the trade-off between coil length, aspect ratio, rotational transform and quality of quasi-axisymmetry. The database of stellarators, which comprises approximately 200 000 coil sets, is available online and is called QUASR, for ‘quasi-symmetric stellarator repository’.

The femtosecond laser filament-induced air laser plays a significant role for the remote sensing of air pollutants. The spatial distributions of air laser intensity were investigated experimentally in previous studies. However, the mechanism of the air laser propagation properties inside the filament plasma has not been quite clear yet. Moreover, few studies have been dedicated to the reproduction of the air laser profile from nitrogen molecules propagating in the filament plasma based on the numerical simulation method. In this study, the lasing action of the air laser from the transition of the first negative (0,0) band of nitrogen ions at 391 nm was simulated during the femtosecond laser filamentation. The beam profile of the air laser changes from a Gaussian or super-Gaussian shape to an outer ring structure by increasing the filament length or nitrogen ion density, which is in accord with the previous experimental result. A multiple-diffraction effect has been proposed to clarify the mechanism of the outer rings beam pattern formation, which is induced by the dynamical interaction between the lasing effect and diffraction effect of the air laser propagating inside the filament plasma. In addition, the amplified air laser power as a function of both the filament length and nitrogen ion density was investigated. Our study would pave the way to improve the energy conversion efficiency and directivity of remote air lasers, which would be significant for remote sensing applications.

Observations, mainly of outbursts in dwarf novae, imply that the anomalous viscosity in highly ionized accretion discs is magnetic in origin and requires that the plasma ${\beta \sim 1}$. Until now, most simulations of the magnetic dynamo in accretion discs have used a local approximation (known as the shearing box). While these simulations demonstrate the possibility of a self-sustaining dynamo, the magnetic activity generated in these models saturates at $\beta \gg 1$. This long-standing discrepancy has previously been attributed to the local approximation itself. There have been recent attempts at simulating magnetic activity in global accretion discs with parameters relevant to the dwarf novae. These too find values of $\beta \gg 1$. We speculate that the tension between these models and the observations may be caused by numerical magnetic diffusivity. As a pedagogical example, we present exact time-dependent solutions for the evolution of weak magnetic fields in an incompressible fluid subject to linear shear and magnetic diffusivity. We find that the maximum factor by which the initial magnetic energy can be increased depends on the magnetic Reynolds number as ${\mathcal {R}}_{m}^{2/3}$. We estimate that current global numerical simulations of dwarf nova discs have numerical magnetic Reynolds numbers around six orders of magnitude less than the physical value found in dwarf nova discs of ${\mathcal {R}}_{m} \sim 10^{10}$. We suggest that, given the current limitations on computing power, expecting to be able to compute realistic dynamo action in observable accretion discs using numerical MHD is, for the time being, a step too far.

This paper establishes a mean-field equation set and an energy theorem to provide a theoretical basis in view of the development of self-consistent, physics-based turbulent transport models for mean-field transport codes. A rigorous averaging procedure identifies the exact form of the perpendicular turbulent fluxes which are modelled by ad hoc diffusive terms in mean-field transport codes, next to other closure terms which are not commonly considered. Earlier work suggested that the turbulent $E\times B$ particle and heat fluxes, which are thus identified to be important closure terms, can be modelled to reasonable accuracy using the kinetic energy in the $E\times B$ velocity fluctuations ($k_{E}$). The related enstrophy led to further modelling improvements in an initial study, although further analysis is required. To support this modelling approach, transport equations are derived analytically for both quantities. In particular, an energy theorem is established in which the various source and sink terms of $k_{E}$ are shown to couple to mean-field and turbulent parallel kinetic energy, kinetic energy in the other perpendicular velocity components, the thermal energy and the magnetic energy. This provides expressions for the interchange, drift-wave and Reynolds stress terms amongst others. Note that most terms in these energy equations are in turn closure terms. It is suggested to evaluate these terms using reference data from detailed turbulence code simulations in future work.

Beam–target reactions in fusion plasmas play an important role in both magnetic confinement fusion and inertial confinement fusion in the condition of low-density plasmas with high-velocity interactions. The traditional method for calculating beam–target reaction rate neglects the transport process of incident particles in inhomogeneous plasmas, leading to errors providing that the temperature and density in the transport path of incident particles vary obviously. An improved method considering the transport process is proposed in this paper to eliminate the deficiencies. Then the method is employed in high-speed plasma collision studies. When the initial plasma density and temperature are set to $0.5\,{\rm g}\,{\rm cm}^{-3}$ and 100 eV, it is found that the beam–target reaction rate calculated by the traditional method is almost identical to that by our method if the collision velocity is less than 600 km s$^{-1}$. However, the traditional method is not suitable for study as the collision velocity gets higher, inducing obvious differences, which can reach 70 % at 1000 km s$^{-1}$. The improved method will make large corrections to evaluate the importance of the non-negligible beam–target reaction for inertial confinement fusion schemes with large implosion velocity such as double-cone ignition and impact ignition, in which the high-speed plasmas collide with each other to realize plasma ignition.

The paper presents experimental results from the SMOLA device, which was built in the Budker Institute of Nuclear Physics for the verification of the helical mirror confinement idea. This concept involves active control of axial losses from the confinement zone in an open magnetic trap through the use of multiple mirrors that move in the plasma frame of reference. The discussed experiments focused on determining the cumulative effect of a helical mirror system in combination with a short segment of a stronger magnetic field. Combination of these two methods of axial flow suppression results in higher efficiency compared with each method individually. Different combinations of the mirrors were tested. The most effective flow suppression was observed if the short mirror was placed between the confinement region and the helical mirror. In this configuration, an effective mirror ratio of $R_{{\rm eff}} = 32.6\pm 7.8$ was achieved, along with a more than three-fold increase in plasma density within the confinement region. The possibility of a cumulative effect of different types of magnetic mirrors offers a way to improve the confinement performance of the reactor-grade mirror confinement devices.