Hostname: page-component-cd9895bd7-8ctnn Total loading time: 0 Render date: 2024-12-28T17:15:45.959Z Has data issue: false hasContentIssue false
  • English
  • Français

Development of experimental and modelling tools for thecharacterisation of the thermo-electro-mechanical behaviour of composite materials foraircraft applications

Published online by Cambridge University Press:  12 April 2011

Marco Gigliotti ,
Marie-Christine Lafarie-Frenot  and
Jean-Claude Grandidier
Get access

Abstract

The present paper is concerned with the thermoelectric behaviour of CFRP compositesamples subjected to DC currents in view of developing experimental and modelling toolsfor the characterisation of the thermo-electro-mechanical behaviour of composite materialsfor aircraft applications. DC currents up to 8 A are injected through the specimens endsides by employing several different electrode techniques whose performances are assessedand compared. Sample and electrode contact resistances are measured for different valuesof the injected current. The transient and permanent temperatures fields promoted by theinjected currents are experimentally measured by infrared thermography. The temperaturefields are simulated numerically by a thermoelectric coupled model employing theABAQUS®FE commercial code; temperatures can be also approximately calculated by a simple lumpedparameter model discarding thermal conduction. The comparison between simulations by themodels and measurements allows employing the simplified model as a tool to designthermo-electro-mechanical tests.

Keywords

Polymer-matrix composites (PMC)thermoelectric couplingelectrical resistancecontact resistanceinfrared thermographythermoelectric numerical coupled modelMatériaux composites à matrice polymèrecouplage thermoélectriquerésistance électriquerésistance de contactthermographie infrarougemodèle numérique thermoélectrique couplé
Type
Research Article
Information
Mechanics & Industry , Volume 12 , Issue 2 , 2011 , pp. 87 - 101
Copyright
© AFM, EDP Sciences 2011

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

Schulte, K., Baron, C., load and failure analysis of CFRP laminates by means of electrical resistivity measurements, Compos. Sci. Tech. 36 (1989) 63–76 CrossRefGoogle Scholar
Abry, J.C., Bochard, S., Chateauminois, A., Salvia, M., Giraud, G., In-situ detection of damage in CFRP laminates by electrical resistance measurements, Compos. Sci. Tech. 59 (1999) 925–935 CrossRefGoogle Scholar
Schueler, R., Joshi, S.P., Schulte, K., Damage detection in CFRP by electrical conductivity mapping, Compos. Sci. Tech. 61 (2001) 921–930 CrossRefGoogle Scholar
Todoroki, A., The effect of number of electrodes and diagnostic tool for monitoring the delamination of CFRP laminates by changes in electrical resistance, Compos. Sci. Tech. 61 (2001) 1871–1880 CrossRefGoogle Scholar
Park, J.B., Okabe, T., Takeda, N., Curtin, W.A., Electromechanical modeling of unidirectional CFRP composites under tensile loading condition, Composites Part A: Appl. Scie. Manufacturing 33 (2002) 267–275 CrossRefGoogle Scholar
Xia, Z., Okabe, T., Park, J.B., Curtin, W.A., Takeda, N., Quantitative damage detection in CFRP composites: coupled mechanical and electrical models, Compos. Sci. Tech. 63 (2003) 1411–1422 CrossRefGoogle Scholar
Angelidis, N., Wei, C.Y., Irving, P.E., The electrical resistance response of continuous carbon fibre composite laminates to mechanical strain, Composites Part A: Appl. Sci. Manufacturing 35 (2004) 1135–1147 CrossRefGoogle Scholar
Chung, D.D.L., Fibrous composite interfaces studied by electrical resistance measurement, Adv. Eng. Mater. 2 (2000) 788–796 3.0.CO;2-J>CrossRefGoogle Scholar
Park, J., Lee, S., Choi, J., Cure monitoring and residual stress sensing of single-carbon fiber reinforced epoxy composites using electrical resistivity measurement, Comp. Sci. Technol. 65 (2005) 571–580 CrossRefGoogle Scholar
Zhupanska, O.I., Sierakowski, R.L., Effects of an electromagnetic field on the mechanical response of composites, J. Comp. Mater. 41 (2007) 633–651 CrossRefGoogle Scholar
Sierakowski, R.L., Telitchev, I.Y., Zhupanska, O.I., On the impact response of electrified carbon fiber polymer matrix composites: effects of electric current intensity and duration, Comp. Sci. Technol. 68 (2008) 639–649 CrossRefGoogle Scholar
http://www.prodecmetal.com, Last date accessed on the January 24, 2011
http://www.tegma.fr/frechin/frechin.html, Last date accessed on the January 24, 2011
http://www.jetmetal-tech.com, Last date accessed on the January 24, 2011
ALTAIR CEDIP User Manual, Version 5. © 1989, 2006 CEDIP Infrared System
ABAQUS 6.7 Users Manual, Version 6.3, © Hibbitt, Karlsson & Sorensen, Inc. 2002
TORAYCA T300 Technica Data Sheet
HEXCEL Hexply 914 Product Data Sheet
D. Gay, Matériaux Composites, Hermes, 1989