Crossref Citations
This article has been cited by the following publications. This list is generated based on data provided by Crossref.
Royer, Laurent
Mathieu, Stéphane
Liebaut, Christophe
and
Steinmetz, Pierre
2010.
Elaboration and Characterization of the Properties of Refractory Cr Base Alloys .
Vol. 72,
Issue. ,
p.
46.
Berthod, Patrice
Heil, Cédric
and
Aranda, Lionel
2010.
Influence of the morphologic evolution of the eutectic carbides at high temperature on the thermal expansion behavior of refractory cast alloys.
Journal of Alloys and Compounds,
Vol. 504,
Issue. 1,
p.
243.
Conrath, Elodie
and
Berthod, Patrice
2014.
Microstructure evolution at high temperature of chromium-rich iron-based alloys containing hafnium carbides.
International Journal of Materials Research,
Vol. 105,
Issue. 8,
p.
717.
Berthod, P.
and
Conrath, E.
2014.
Microstructure evolution in bulk and surface states of chromium rich nickel based cast alloys reinforced by hafnium carbides after exposure to high temperature air.
Materials at High Temperatures,
Vol. 31,
Issue. 3,
p.
266.
Berthod, Patrice
2018.
Microstructures and Surface Stabilities of {Ni-0.4C-6Ta-xCr, 0 ≤ x ≤ 50 Wt Pct} Cast Alloys at High Temperature.
Metallurgical and Materials Transactions A,
Vol. 49,
Issue. 6,
p.
2311.
Berthod, Patrice
and
Himeur, Zohra
2018.
Experimental and thermodynamic investigations regarding the effect of chromium on the carbides population in cast {Ni(bal.)-0.4C-6Ta-xCr} alloys with x varying from 0 to 50 wt%.
Calphad,
Vol. 62,
Issue. ,
p.
30.
Berthod, Patrice
and
Himeur, Zohra
2018.
Dependence on the Chromium Content of the High-Temperature Oxidation Behavior of Ta-Rich Nickel-Based Cast Alloys.
Oxidation of Metals,
Vol. 90,
Issue. 1-2,
p.
135.
Berthod, Patrice
and
Gomis, Jean-Paul
2020.
Improvement of the high temperature oxidation of TaC-strengthened Co(Cr)-based cast superalloys by the addition of nickel.
Corrosion Engineering, Science and Technology,
Vol. 55,
Issue. 2,
p.
118.
KANE, DAME ASSANE
ARANDA, LIONEL
and
BERTHOD, PATRICE
2021.
Behavior at 1100°C of nickel–based alloys strengthened by MC carbides with M = Tantalum and Hafnium.
Journal of Engineering Sciences and Innovation,
Vol. 6,
Issue. 4,
p.
359.