No CrossRef data available.
Published online by Cambridge University Press: 12 November 2018
By using electrochemical tests, small signal variations were study by digital signal processing techniques. Electrochemical noise and electrochemical polarization curves were very useful to obtained electrochemical behavior of alloys, but the low signal levels of measurements obtained showed that some of the information was not likely to be measured and, therefore, not being able to identify. Graphene oxides (GO) samples were prepared by ball milling procedure adding Lithium. SIGVIEW software was used for Digital Signal studies. Comparing, the signals obtained by electrochemical techniques and the research by computational tools; it was possible to find out a behavior path of samples. Display devices made by graphene were observed to provide new information about the structure of samples and how nanotechnology area can be improved. The current investigation aimed at maintaining electrochemical stability, since different deformations, as twisting and bending are quite relevant in portable electronics devices.