Published online by Cambridge University Press: 30 May 2017
We report on the formation of shallow junctions with high activation in both n+/p and p+/n Ge junctions using ion implantation and Flash Lamp Annealing (FLA). The shallowest junction depths (Xj) formed for the n+/p and p+/n junctions were 7.6 nm and 6.1 nm with sheet resistances (Rs) of 860 ohms/sq. and 704 ohms/sq., respectively. By reducing knocked-on oxygen during ion implantation in the n+/p junctions, Rs was decreased by between 5% and 15%. The lowest Rs observed was 235 ohms/sq. with a junction depth of 21.5 nm. Hall measurements clearly revealed that knocked-on oxygen degraded phosphorus activation (carrier concentration). In the p+/n Ge junctions, we show that ion implantation damage induced high boron activation. Using this technique, Rs can be reduced from 475 ohms/sq. to 349 ohms/sq. These results indicate that the potential for forming ultra-shallow n+/p and p+/n junctions in the nanometer range in Ge devices using FLA is very high, leading to realistic monolithically-integrated Ge CMOS devices that can take us beyond Si technology.
To send this article to your Kindle, first ensure no-reply@cambridge.org is added to your Approved Personal Document E-mail List under your Personal Document Settings on the Manage Your Content and Devices page of your Amazon account. Then enter the ‘name’ part of your Kindle email address below. Find out more about sending to your Kindle. Find out more about saving to your Kindle.
Note you can select to save to either the @free.kindle.com or @kindle.com variations. ‘@free.kindle.com’ emails are free but can only be saved to your device when it is connected to wi-fi. ‘@kindle.com’ emails can be delivered even when you are not connected to wi-fi, but note that service fees apply.
Find out more about the Kindle Personal Document Service.
To save this article to your Dropbox account, please select one or more formats and confirm that you agree to abide by our usage policies. If this is the first time you used this feature, you will be asked to authorise Cambridge Core to connect with your Dropbox account. Find out more about saving content to Dropbox.
To save this article to your Google Drive account, please select one or more formats and confirm that you agree to abide by our usage policies. If this is the first time you used this feature, you will be asked to authorise Cambridge Core to connect with your Google Drive account. Find out more about saving content to Google Drive.