Hostname: page-component-586b7cd67f-t7czq Total loading time: 0 Render date: 2024-11-29T16:26:06.325Z Has data issue: false hasContentIssue false
  • English
  • Français

Multiscale corrosion analysis of superhydrophobic coating on 2024 aluminum alloy in a 3.5 wt% NaCl solution

Published online by Cambridge University Press:  07 April 2020

Divine Sebastian ,
Chun-Wei Yao Open the ORCID record for Chun-Wei Yao [Opens in a new window]  and
Ian Lian
Divine Sebastian
Affiliation:
Department of Mechanical Engineering, Lamar University, Beaumont, TX77710, USA
Chun-Wei Yao*
Affiliation:
Department of Mechanical Engineering, Lamar University, Beaumont, TX77710, USA
Ian Lian
Affiliation:
Department of Biology, Lamar University, Beaumont, TX77710, USA
*
Address all correspondence to Chun-Wei Yao at cyao@lamar.edu
Get access

Abstract

In this work, a facile superhydrophobic coating for 2024-T3 aluminum alloy is developed and characterized. The corrosion resistance of the coating was analyzed. The results showed that the coating has high polarization resistance and a low corrosion rate. Furthermore, a micro/nanoscale investigation about the interaction between substrates and the corrosive environment was carried out using the in situ atomic force microscope technique. The change in surface topography was monitored for both the bare aluminum alloy substrate and the superhydrophobic aluminum alloy. The results showed that the coating retained surface features indicated that the coating has excellent corrosion resistance.

Type
Research Letters
Information
MRS Communications , Volume 10 , Issue 2 , June 2020 , pp. 305 - 311
Copyright
Copyright © Materials Research Society 2020

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1.Xu, L., Liu, F., Liu, M., Wang, Z., Qian, Z., Ke, W., Han, E., Jie, G., Wang, J., and Zhu, L.: Fabrication of repairable superhydrophobic surface and improved anticorrosion performance based on zinc-rich coating. Prog. Org. Coat. 137, 105335 (2019).CrossRefGoogle Scholar
2.Rao, A., Latthe, S., Mahadik, S., and Kappenstein, C.: Mechanically stable and corrosion resistant superhydrophobic sol–gel coatings on copper substrate. Appl. Surf. Sci. 257, 5772–5776 (2011).CrossRefGoogle Scholar
3.Jung, S., Dorrestijn, M., Raps, D., Das, A., Megaridis, C., and Poulikakos, D.: Are superhydrophobic surfaces best for icephobicity? Langmuir 27, 3059–3066 (2011).CrossRefGoogle ScholarPubMed
4.Wang, Z., Li, Q., She, Z., Chen, F., and Li, L.: Low-cost and large-scale fabrication method for an environmentally-friendly superhydrophobic coating on magnesium alloy. J. Mater. Chem. 22, 4097 (2012).CrossRefGoogle Scholar
5.Boinovich, L. and Emelyanenko, A.: The behaviour of fluoro- and hydrocarbon surfactants used for fabrication of superhydrophobic coatings at solid/water interface. Colloids Surf. A Physicochem. Eng. Asp. 481, 167–175 (2015).CrossRefGoogle Scholar
6.Yu, J., Qin, L., Hao, Y., Kuang, S., Bai, X., Chong, Y., Zhang, W., and Wang, E.: Vertically aligned boron nitride nanosheets: chemical vapor synthesis, ultraviolet light emission, and superhydrophobicity. ACS Nano 4, 414–422 (2010).CrossRefGoogle ScholarPubMed
7.Tao, C., Yan, H., Yuan, X., Yao, C., Yin, Q., Zhu, J., Ni, W., Yan, L., and Zhang, L.: Synthesis of shape-controlled hollow silica nanostructures with a simple soft-templating method and their application as superhydrophobic antireflective coatings with ultralow refractive indices. Colloids Surf. A Physicochem. Eng. Asp. 501, 17–23 (2016).CrossRefGoogle Scholar
8.Qian, B. and Shen, Z.: Fabrication of superhydrophobic surfaces by dislocation-selective chemical etching on aluminum, copper, and zinc substrates. Langmuir 21, 9007–9009 (2005).CrossRefGoogle ScholarPubMed
9.Bahgat, A., Mohamed, A., Abdullah, A., and Almaadeed, M.: Superhydrophobic and corrosion behavior of electrospun PVDF–ZnO coating. ECS Trans. 64, 57–67 (2015).CrossRefGoogle Scholar
10.Schaeffer, D., Polizos, G., Smith, D., Lee, D., Hunter, S., and Datskos, P.: Optically transparent and environmentally durable superhydrophobic coating based on functionalized SiO2 nanoparticles. Nanotechnology 26, 055602 (2015).CrossRefGoogle Scholar
11.Zhang, Z., Ge, B., Men, X., and Li, Y.: Mechanically durable, superhydrophobic coatings prepared by dual-layer method for anti-corrosion and self-cleaning. Colloids Surf. A Physicochem. Eng. Asp. 490, 182–188 (2016).CrossRefGoogle Scholar
12.Qing, Y., Yang, C., Hu, C., Zheng, Y., and Liu, C.: A facile method to prepare superhydrophobic fluorinated polysiloxane/ZnO nanocomposite coatings with corrosion resistance. Appl. Surf. Sci. 326, 48–54 (2015).CrossRefGoogle Scholar
13.Sebastian, D., Yao, C., and Lian, I.: Abrasion resistance of superhydrophobic coatings on aluminum using PDMS/SiO2. Coatings 8, 414 (2018).CrossRefGoogle Scholar
14.Wong, T., Wang, H., Wang, F., Sin, S., Quan, C., Wang, S., and Zhou, X.: Development of a highly transparent superamphiphobic plastic sheet by nanoparticle and chemical coating. J. Colloid Interface Sci. 467, 245–252 (2016).CrossRefGoogle ScholarPubMed
15.Chen, Z., Hao, L., Chen, A., Song, Q., and Chen, C.: A rapid one-step process for fabrication of superhydrophobic surface by electrodeposition method. Electrochim. Acta 59, 168–171 (2012).CrossRefGoogle Scholar
16.Zhu, X., Zhang, Z., Xu, X., Men, X., Yang, J., Zhou, X., and Xue, Q.: Facile fabrication of a superamphiphobic surface on the copper substrate. J. Colloid Interface Sci. 367, 443–449 (2012).CrossRefGoogle ScholarPubMed
17.She, Z., Li, Q., Wang, Z., Li, L., Chen, F., and Zhou, J.: Novel method for controllable fabrication of a superhydrophobic CuO surface on AZ91D magnesium alloy. ACS Appl. Mater. Interfaces 4, 4348–4356 (2012).CrossRefGoogle ScholarPubMed
18.Xu, Z., Miyazaki, K., and Hori, T.: Fabrication of polydopamine-coated superhydrophobic fabrics for oil/water separation and self-cleaning. Appl. Surf. Sci. 370, 243–251 (2016).CrossRefGoogle Scholar
19.Xu, L., Karunakaran, R., Guo, J., and Yang, S.: Transparent, superhydrophobic surfaces from one-step spin coating of hydrophobic nanoparticles. ACS Appl. Mater. Interfaces 4, 1118–1125 (2012).CrossRefGoogle ScholarPubMed
20.Cao, C., Ge, M., Huang, J., Li, S., Deng, S., Zhang, S., Chen, Z., Zhang, K., Al-Deyab, S., and Lai, Y.: Robust fluorine-free superhydrophobic PDMS–ormosil@fabrics for highly effective self-cleaning and efficient oil–water separation. J. Mater. Chem. A 4, 12179–12187 (2016).CrossRefGoogle Scholar
21.Gao, S., Dong, X., Huang, J., Li, S., Li, Y., Chen, Z., and Lai, Y.: Rational construction of highly transparent superhydrophobic coatings based on a non-particle, fluorine-free and water-rich system for versatile oil-water separation. Chem. Eng. J. 333, 621–629 (2018).CrossRefGoogle Scholar
22.Wang, C., Tang, F., Li, Q., Zhang, Y., and Wang, X.: Spray-coated superhydrophobic surfaces with wear-resistance, drag-reduction and anti-corrosion properties. Colloids Surf. A Physicochem. Eng. Asp. 514, 236–242 (2017).CrossRefGoogle Scholar
23.Zheng, S., Li, C., Fu, Q., Hu, W., Xiang, T., Wang, Q., Du, M., Liu, X., and Chen, Z.: Development of stable superhydrophobic coatings on aluminum surface for corrosion-resistant, self-cleaning, and anti-icing applications. Mater. Des. 93, 261–270 (2016).CrossRefGoogle Scholar
24.Zhang, B., Zhu, Q., Li, Y., and Hou, B.: Facile fluorine-free one step fabrication of superhydrophobic aluminum surface towards self-cleaning and marine anticorrosion. Chem. Eng. J. 352, 625–633 (2018).CrossRefGoogle Scholar
25.Cui, X., Zhu, G., Pan, Y., Shao, Q., Zhao, C., Dong, M., Zhang, Y., and Guo, Z.: Polydimethylsiloxane-titania nanocomposite coating: fabrication and corrosion resistance. Polymer 138, 203–210 (2018).CrossRefGoogle Scholar
26.Wei, L., Liu, Y., Li, Q., and Cheng, Y.: Effect of roughness on general corrosion and pitting of (FeCoCrNi)0.89(WC)0.11 high-entropy alloy composite in 3.5 wt.% NaCl solution. Corros. Sci. 146, 44–57 (2019).CrossRefGoogle Scholar
27.Li, J., Ecco, L., Fedel, M., Ermini, V., Delmas, G., and Pan, J.: In situ AFM and EIS study of a solvent borne alkyd coating with nanoclay for corrosion protection of carbon steel. Prog. Org. Coat. 87, 179–188 (2015).CrossRefGoogle Scholar
Supplementary material: File

Sebastian et al. Supplementary Materials

Sebastian et al. Supplementary Materials

Download Sebastian et al. Supplementary Materials(File)
File 10.5 MB