Hostname: page-component-586b7cd67f-t7fkt Total loading time: 0 Render date: 2024-11-29T09:33:13.776Z Has data issue: false hasContentIssue false
  • English
  • Français

Amorphous Phase Formation in NiTi During Cold Rolling

Published online by Cambridge University Press:  28 February 2011

J. Koike ,
D. M. Parkin  and
M. Nastasi
J. Koike
Affiliation:
Center for Materials Science, Los Alamos National Laboratory, Los Alamos, NM 87545
D. M. Parkin
Affiliation:
Center for Materials Science, Los Alamos National Laboratory, Los Alamos, NM 87545
M. Nastasi
Affiliation:
Materials Science and Technology Division, Los Alamos National Laboratory, Los Alamos, NM 87545
Get access

Abstract

The intermetallic compound NiTi was cold rolled at room temperature. Amorphous bands were formed within the finely twined crystalline matrix after thickness reduction of 60%. Striking similarities were observed in microstructural morphology between amorphous bands and shear bands that are generally observed in heavily cold-rolled pure metals. We suggest from the present observations together with the reported results in other solid-state amorphization experiments that the amorphous bands are produced in the shear bands, and that amorphization is caused by mechanical instability against the shear stress.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 186: Symposium I – Alloy Phase Stability and Design , 1990 , 161
Copyright
Copyright © Materials Research Society 1991

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. See, for example, Less-Comm, J.. Metals 140 (1988) (Proceedings of the 1st international conference on the solid-state amorphizing transformation, ed. by Schwarz, R. and Johnson, W. L.).Google Scholar
2. Koike, J., Parkin, D. M., and Nastasi, M., J. Mater. Res. (1990), in press.Google Scholar
3. Koike, J., Parkin, D. M., and Nastasi, M., (1990) to be published.Google Scholar
4. Hatherly, M., in Strength of Metals and Alloys, ed. byGifkin, R. C. (Pergamon, New York, 1983), p. 69.Google Scholar
5. Harren, S. V., Deve, H. E., and Asaro, R. J., Acta Met. 36, 2435, (1988).Google Scholar
6. Tat'yanin, YE. V., Kurdyumov, V. G., and Fedrov, V. B., Fiz. Metal. Metalloved. 62, 133, (1988).Google Scholar
7. Rehn, L. E., Okamoto, P. R., Pearson, J., Bhadra, R., and Grimsditch, M., Phys. Rev. Lett. 59, 2987, (1987).Google Scholar
8. Koike, J., Okamoto, P. R., Rehn, L. E., Bhadra, R., Grimsditch, M., and Meshii, M., Mater. Res. Soc. Proc. 157, 777, (1990).Google Scholar
9. Argon, A. S., Acta Met. 27, 47 (1979)Google Scholar
10. Chen, H. S. and Polk, D. E., J. Non-Cryst. Solids 15, 174, (1974).Google Scholar
11. Pampillo, C. A. and Chen, H. S., Mater. Sci. Eng. 13, 181, (1974).Google Scholar