Hostname: page-component-669899f699-ggqkh Total loading time: 0 Render date: 2025-04-28T07:53:51.524Z Has data issue: false hasContentIssue false
  • English
  • Français

Antireflective MgF2 Coating on Polycarbonate

Published online by Cambridge University Press:  01 February 2011

Takanobu Hori ,
Isao Tokomoto ,
Kazuo Uetani ,
Masashi Fukinbara ,
Akira Kato  and
Hiroshi Kajiyama
Takanobu Hori
Affiliation:
R&D Center, ShinMaywa Industries, Ltd., Hyogo 663-8001, Japan.
Isao Tokomoto
Affiliation:
R&D Center, ShinMaywa Industries, Ltd., Hyogo 663-8001, Japan.
Kazuo Uetani
Affiliation:
R&D Center, ShinMaywa Industries, Ltd., Hyogo 663-8001, Japan.
Masashi Fukinbara
Affiliation:
Graduate School of Engineering, Ibaraki University, Ibaraki 316-8511, Japan.
Akira Kato
Affiliation:
Hitachi Research Laboratory, Hitachi, Ltd., Ibaraki 319-1292, Japan.
Hiroshi Kajiyama
Affiliation:
Graduate School of Engineering, Ibaraki University, Ibaraki 316-8511, Japan. Hitachi Research Laboratory, Hitachi, Ltd., Ibaraki 319-1292, Japan.
Get access

Abstract

We deposited MgF2 thin films using the ion-plating method that features RF and DC biasing to the substrate holder. We investigated the effects of RF powers, substrate temperatures (Ts) and DC bias voltages on optical absorption and abrasion resistance of the films. The optical absorption deteriorated by increasing RF power and Ts. In particular, the deterioration was quite serious when the Ts were above 423 K. The abrasion resistance increased by increasing the Ts. We found that the abrasion resistance could be improved also by increasing a DC bias voltage. The same abrasion resistance as the film deposited by a conventional heat resistance deposition at 573 K was obtained by applying the DC bias voltage of -500 V and the Ts of 300 K.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 722: Symposia K/L – Materials and Devices for Optoelectronics and Photonics – Photonic Crystals-From Materials to Devices , 2002 , L5.3
Copyright
Copyright © Materials Research Society 2002

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable

References

1. Rancourt, J. D., Optical Thin Films User Handbook, (SPIE Optical Engineering Press, Bellingham, 1996).Google Scholar
2. Ogura, S., Sugawara, N. and Hiraga, R., Thin Solid Films 30, 3(1974).Google Scholar
3. Ogura, S. and Macleod, H. A., Thin Solid Films 34, 371(1976).Google Scholar
4. Kawamata, K., J.Vac.Soc.Jpn. 43, 773(2000).Google Scholar
5. Kawamata, K., Shouzu, T. and Mitamura, N., Vacuum 51, 559(1998).Google Scholar
6. Kawamata, K., Takao, K. and Shouzu, T., Optronics 17, 155(1998).Google Scholar
7. Martinu, L., Biederman, H. and Holland, L., Vacuum 35, 531(1985).Google Scholar
8. Coleman, W. J., Applied Optics 13, 946(1974).Google Scholar
9. Uetani, K., Kajiyama, H., Kato, A., Takagi, A., Tokomoto, I., Koizumi, Y., Nose, K., Ihara, Y., Onisawa, K. and Minemura, T., Mater. Trans. JIM 44, 411(2001).Google Scholar
10.JCPDS-card 41-1443(1997).Google Scholar
11. Lee, H. C., Asano, T., Ishiwara, H. and Furukawa, S., Jpn. J. Appl. Phys. 27, 1616(1988).Google Scholar