Hostname: page-component-745bb68f8f-s22k5 Total loading time: 0 Render date: 2025-02-10T23:32:50.075Z Has data issue: false hasContentIssue false
  • English
  • Français

Aspects Of Chemistry and Chemical Processing Of Organically Modified Ceramics

Published online by Cambridge University Press:  28 February 2011

Helmut K. Schmidt
Helmut K. Schmidt*
Affiliation:
Fraunhofer-Institut für Silicatforchung, Neunerplatz 2,D-8700 Würzburg, Federal Republic of GermanyNew address:Institut für Neue Materialien, Universität des Saarlandes, Gebäude 43, Im Stadtwald, D-6600 Saarbrücken, Federal Republic of Germany
Get access

Abstract

For the synthesis of composites on a nano or molecular level, chemical or physical methods have to be used since mechanical procedures cannot be employed for these systems. If organics have to be included, low temperature processing has to be used for the synthesis of the inorganic component in order not to damage the organic component. Sol-gel techniques are an appropriate means to synthesize oxidic networks by soft chemistry, and various systems of organically modified ceramics (ORMOCERs) have been developed so far. It has been shown that the synthesis parameter can be used to tailor the material properties in a wide range. A review over the chemistry and chemical properties of ORMOCERs and several examples of material developments will be given.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 180: Symposium A – Better Ceramics Through Chemistry IV , 1990 , 961
Copyright
Copyright © Materials Research Society 1990

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

[1] Kersten, R. Th., In: Extended Abstracts of the Topical Meeting on Glasses for Optoelectronics, December 1, 1989, The Ceramic Society of Japan, Tokyo/Japan, 24.Google Scholar
[2] Sporn, D., Schmidt, H., In: Proceedings of the 1st European Ceramic Society Conference including Science of Ceramics 15, June 1989, North-Holland Physics Publishers, Amsterdam (in print).Google Scholar
[3] Aksay, I.A., Stangle, G.C., Sarikaya, M., In: Ceramic Powder Processing Science. Eds.: Hausner, H., Messing, G.L., Hirano, S.; Deutsche Keramische Gesellschaft 1989, 463.Google Scholar
[4] Scherer, G.W., J. Non-Cryst. Solids 100 (1988) 77.Google Scholar
[5] Scherer, G.W., J. Non-Cryst. Solids 121 (1990) 104.Google Scholar
[6] Mackenzie, D., Mat. Res. Soc. Symp. Proc. 32 (1984) 169.Google Scholar
[7] Sakka, S., In: Sol-Gel Technology for Thin Films, Fibers, Preforms, Electronics and Speciality Shapes. Ed.: Klein, L.C.; Noyes Publications, Park Ridge/New Jersey 1988, 140.Google Scholar
[8] Schmidt, H., Erzmetall 43 (1990) No. 2, 75.Google Scholar
[9] Schmidt, H., In: Proceedings Fourth International Confer. on Ultrastructure Processing of Ceramics, Glasses and Composites February 1989 Tucson/USA. John Wiley and Sons, publishers (in print).Google Scholar
[10] Schmidt, H., Mat. Res. Soc. Symp. Proc. 171 (1990) 3.Google Scholar
[11] Schmidt, H., Popall, M., Rousseau, F., Poinsignon, C., Armand, M., In: Proceedings Second Internat. Symp. on Polymer Electrolytes, June 1989, Siena/Italy (in print).Google Scholar
[12] Wilkes, G.L., Brennan, A.B., Huang, H.-H., Rodrigues, D., Wang, B., Mat. Res. Soc. Symp. Proc. 171 (1990) 15 Google Scholar
[13] Garrido, L., Ackerman, J.L., Mark, J.E., Mat. Res. Soc. Symp. Proc. 171 (1990) 65.Google Scholar
[14] Schaefer, D.W., Mark, J.E., McCarthy, D., Jian, L., Sun, C.-C., Farago, B., Mat. Res. Soc. Symp. Proc. 171 (1990) 57.Google Scholar
[15] Schottner, G., Oral presentation at 52nd Wilhelm-Else-Heraeus-Seminar, Bad Honnef/FRG, May 1989.Google Scholar
[16] Ravaine, D., Seminel, A., Charbouillot, Y., Vincens, M., J. Non-Cryst. Solids 82 (1986) 210.Google Scholar
[17] Charbouillot, Y., Ph.D. thesis. Institut National Polytechnique, Grenoble, 1987.Google Scholar
[18] Philipp, G., Schmidt, H., J. Non-Cryst. Solids 63 (1984) 283.Google Scholar
[19] Popall, M., Meyer, H., Presentation at VDI/VDE-TZ Seminar “Anwendung der laserinduzierten Metallabscheidung für Multi Chip Module”, Berlin, March 21, 1990.Google Scholar
[20] Schmidt, H., Wolter, H., J. Non-Cryst. Solids 121 (1990) 428.Google Scholar
[21] Wolter, H., Schmidt, H., DVS-Berichte 129 (1990).Google Scholar
[22] Haas, K.H., Hutter, F., Schmidt, H., In: Proceedings Int. Conf. on Materials with Exceptional Properties 1987.Google Scholar
[23] Annual Report 1989 of Fraunhofer-Institut für Silicatforschung, 131.Google Scholar
[24] Schmidt, H., Seiferling, B., Mat. Res. Soc. Symp. Proc. 73 (1986) 739.Google Scholar
[25] Naβ, R., Arpac, E., Glaubitt, W. Schmidt, H., Non-Cryst. Solids 121 (1990) 370.Google Scholar
[26] Mutz, J.-L., Private Communication, to be published seperately.Google Scholar
[27] Naβ, R., Arpac, E., Schmidt, H., In: Proceedings Third International Conf. on Ceramic Powder Processing Science San Diego February 1990, Amer. Cer. Soc. (in print).Google Scholar