Hostname: page-component-78c5997874-m6dg7 Total loading time: 0 Render date: 2024-11-01T21:23:04.353Z Has data issue: false hasContentIssue false
  • English
  • Français

Atomic Force Microscopy Study of GaN-Buffer Layers on SiC(0001) By MOCVD

Published online by Cambridge University Press:  15 February 2011

Dongsup Lim ,
Dongjin Byun ,
Gyeungho Kim ,
Ok-Hyun Nam ,
In-Hoon Choi ,
Dalkeun Park  and
Dong-Wha Kum
Dongsup Lim
Affiliation:
Korea University, Department of Materials Science and Engineering, Seoul, Korea.
Dongjin Byun
Affiliation:
KIST, Division of Metals, Seoul, Korea.
Gyeungho Kim
Affiliation:
KIST, Division of Metals, Seoul, Korea.
Ok-Hyun Nam
Affiliation:
KIST, Division of Metals, Seoul, Korea.
In-Hoon Choi
Affiliation:
Korea University, Department of Materials Science and Engineering, Seoul, Korea.
Dalkeun Park
Affiliation:
KIST, Division of Chemical Engineering, Seoul, Korea.
Dong-Wha Kum
Affiliation:
KIST, Division of Metals, Seoul, Korea.
Get access

Abstract

Buffer layers promote lateral growth of films due to a decrease in interfacial free energy between the film and substrate, and large 2-dimensional nucleation. Smooth surfaces of thebuffer layers are desired. Optimum conditions for GaN-buffer growth on the vicinal surface of 6H-SiC(0001) were determined by atomic force microscope (AFM). AFM analysis of the GaN nucleation layers led to an optimum growth conditions of the GaN-buffer layer which was confirmed by cross-sectional transmission electron microscopy, Hall measurements and photoluminescence spectra. Optimum growth conditions for GaN-buffer layer on SiC(0001) was determined to be 1 minute growing at 550°C.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 423: Symposium E – III-Nitride, SiC, and Diamond Materials for Electronic , 1996 , 451
Copyright
Copyright © Materials Research Society 1996

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1] Seifert, W., Franzheld, R., Butter, E., Subotta, H. and Riede, V., Cryst. Res. Technol. 18, 383 (1983).Google Scholar
2] Amano, H., Kito, M., Hiramatsu, K. and Akasaki, I., Jpn. J. Appl. Phys. 28, L2112 (1989).Google Scholar
3] Nakamura, S., Senoh, M. and Mukai, T., Jpn. J. Appl. Phys. 30, 1708 (1991).Google Scholar
4] Yoshida, S., Misawa, S. and Gonda, S., Appl. Phys. Lett. 42, 427 (1983).Google Scholar
5] Amano, H., Sawaki, N., Akasaki, I. and Toyoda, Y., Appl. Phys. Lett. 48, 353 (1986).Google Scholar
6] Nakamura, S., Jpn. J. Appl. Phys. 30, L1705 (1991).Google Scholar
7] Lin, M. E., Sverdlov, B., Zhou, G. L. and Morkoc, H., Appl. Phys. Lett. 62, 3479 (1993).Google Scholar
8] Wang, K., Pavlidis, D. and Sigh, J., 22nd International Symposium on Compound Semiconductors Proceedings, in press (1995).Google Scholar
9] Qian, W., Skowronski, M., and De Graef, M., Appl. Phys. Lett. 66, 1252 (1995).Google Scholar
10] Maier, K., Schneider, J., Akasaki, I. and Amano, H., Jpn. J. Appl. Phys. 32, L846 (1993).Google Scholar
11] Strite, S. and Morkoc, H., J. Vac. Sci. Technol. 310, 1237 (1992).Google Scholar
12] Chung, B-C. and Gershenzon, M., J. Appl. Phys. 72, 651 (1992).Google Scholar