Hostname: page-component-5c6d5d7d68-ckgrl Total loading time: 0 Render date: 2024-08-17T20:15:51.659Z Has data issue: false hasContentIssue false
  • English
  • Français

Damage Removal and Activation in Rapid-Thermally-Annealed Silicon Implanted Semi-Insulating GaAs

Published online by Cambridge University Press:  21 February 2011

J. L. Tandon ,
J. H. Madok ,
I. S. Leybovich  and
G. Bai
J. L. Tandon
Affiliation:
McDonnell Douglas Microelectronics Center, Huntington Beach, CA 92647
J. H. Madok
Affiliation:
McDonnell Douglas Microelectronics Center, Huntington Beach, CA 92647
I. S. Leybovich
Affiliation:
McDonnell Douglas Microelectronics Center, Huntington Beach, CA 92647
G. Bai
Affiliation:
California Institute of Technology, Pasadena, CA 91125
Get access

Abstract

In the Rapid-Thermal-Annealing of Si-implanted undoped semi-insulating GaAs three regimes are broadly identified. At ˜ 600°C, ion implantation damage is largely removed, as indicated by lattice-strain measurements performed by X-ray rocking curves. Between ˜ 600 – 900°C, “extended defects”, which presumably account for the long tails in the electron concentration depth profiles, are annealed. Higher annealing temperatures in this range result in profiles with successively shorter tails. Finally, beyond ˜ 900°C, “acceptor levels” in the material are revealed, which become effective in compensating the Si activation.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 126: Symposium P – Advanced Surface Processes for Optoelectronics , 1988 , 207
Copyright
Copyright © Materials Research Society 1988

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Gill, S.S. and Sealy, B.J., J. Electrochem. Soc.: Solid-State Science and Technology, 2590 (1986).Google Scholar
2. Cummings, K.D., Pearton, S.J. and Vella-Coleiro, G.P., J. Appl. Phys. 60, 163 (1986).Google Scholar
3. Zuleeg, R., Notthoff, J.K. and Troeger, G. L., IEEE Electron Dev. Lett. EDL–5, 21 (1984).Google Scholar
4. Wilson, M.R., Kosel, P.B., Shen, Y.D. and Welch, B.M., J. Electrochem Soc.: Solid-State Science and Technology, 2560 (1987).Google Scholar
5. Kiehl, R.A., Sontras, M.A., Widiger, D.J. and Kwapien, W.M., IEEE Trans. Electron Dev. ED–34, 2412 (1987).Google Scholar
6. Gibbons, J.F., Johnson, W.S. and Mylrorie, S.W., Projected Range Statistics (Dowden, Hutchinson and Ross, Stroudsburg, Pa., 1975).Google Scholar
7. Paine, B.M., Hurvitz, N.N. and Speriosu, V.S., J. Appl. Phys. 61, 1335 (1987).Google Scholar
8. Paine, B.M. and Speriosu, V.S., J. Appl. Phys. 62, 1704 (1987).Google Scholar
9. Tandon, J.L., Madok, J.H., Leybovich, I.S., Bai, G. and Nicolet, M-A., to be published.Google Scholar
10. Tandon, J.L., Leybovich, I.S. and Bai, G., to be published.Google Scholar