Hostname: page-component-78c5997874-v9fdk Total loading time: 0 Render date: 2024-11-18T18:49:19.748Z Has data issue: false hasContentIssue false
  • English
  • Français

Effect of Al Additions on the Synthesis of Single-Phase Ti3SiC2

Published online by Cambridge University Press:  01 February 2011

ZhengMing Sun ,
Songlan Yang ,
Hitoshi Hashimoto  and
Michel W. Barsoum
ZhengMing Sun
Affiliation:
National Institute of Advanced Industrial Science and Technology (AIST), Nagoya 463–8560, Japan Department of Materials Science and Engineering, Drexel University, Philadelphia, PA19104, U.S.A.
Songlan Yang
Affiliation:
National Institute of Advanced Industrial Science and Technology (AIST), Nagoya 463–8560, Japan State Key Laboratory for Corrosion and protection, Institute of Metal Research, Chinese Academy of Sciences, Shenyang 110016, P. R. China
Hitoshi Hashimoto
Affiliation:
National Institute of Advanced Industrial Science and Technology (AIST), Nagoya 463–8560, Japan
Michel W. Barsoum
Affiliation:
Department of Materials Science and Engineering, Drexel University, Philadelphia, PA19104, U.S.A.
Get access

Abstract

Powder mixtures of 3Ti/SiC/C/xAl with different Al contents (x=0∼0.2) were reactively sintered by pulse discharge sintering (PDS) process, to reveal the effect of Al addition on the single-phase bulk Ti3SiC2 synthesis. It was found that the optimal sintering temperature for the Ti3SiC2 synthesis is greatly decreased by the Al addition. Almost single-phase bulk Ti3SiC2 material can be synthesized from 3Ti/SiC/C/0.15Al and 3Ti/SiC/C/0.20Al powder mixtures at temperature as low as 1200°C for 15 min by PDS. And the optimal temperature range for the Ti3SiC2 formation is enlarged obviously by the Al addition.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 848: Symposium FF – Solid-State Chemistry of Inorganic Materials V , 2004 , FF3.26
Copyright
Copyright © Materials Research Society 2005

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Jeitschko, W., and Nowotny, H., Monatasch. Fur Chem. 98, 329 (1967).Google Scholar
2. Arunajatesan, S. and Cerim, A. H., J. Am. Ceram. Soc. 78, 667 (1995).Google Scholar
3. Barsoum, M. W., and El-Raghy, T., J. Am. Ceram. Soc. 79, 1953 (1996).Google Scholar
4. Barsoum, M. W., Prog. Solid St. Chem. 28, 201 (2000).Google Scholar
5. Sun, Z. M., Zhang, Z. F., Hashimoto, H., Abe, T., Mater. Trans. 43, 428 (2002).Google Scholar
6. Zhang, Z. F., Sun, Z. M., Hashimoto, H., Metall. Mater. Trans. 33A, 3321 (2002).Google Scholar
7. Yang, S. L., Sun, Z. M., Solihin, , Hashimoto, H. and Abe, T., Mat. Res. Innovat. 7, 225 (2003).Google Scholar
8. Yang, S. L., Sun, Z. M., Hashimoto, H., Oxid. Met. 59, 155 (2003).Google Scholar
9. El-Raghy, T., Barsoum, M.W., J. Am. Ceram. Soc. 82, 2849 (1999).Google Scholar
10. Yang, S. L., Sun, Z. M., Hashimoto, H., J. Alloy. Compd. 368, 312 (2004).Google Scholar
11. Yu, R., Zhan, Q., He, L. L., Zhou, Y. C., Ye., H. Q., Acta Mater., 50, 4127 (2002).Google Scholar
12. Yu, R., He, L. L., Ye., H. Q., Acta Mater., 51, 2447 (2003).Google Scholar