Hostname: page-component-586b7cd67f-dlnhk Total loading time: 0 Render date: 2024-11-29T09:28:35.343Z Has data issue: false hasContentIssue false
  • English
  • Français

The Effect of Post W-Etchback Cleaning Treatments and Implementation of Refractory Metal Buffer Layers on the Electromigration Performance of TiN/AlCu/TiN/Ti Metallization Systems

Published online by Cambridge University Press:  15 February 2011

Henk Roede ,
Catherine Gounelle ,
François Giroux  and
Wim Doedel
Henk Roede
Affiliation:
Centre Commun CNET/SGS-THOMSON, 850 Rue Jean Monnet, 38921 Crolles, France
Catherine Gounelle
Affiliation:
Centre Commun CNET/SGS-THOMSON, 850 Rue Jean Monnet, 38921 Crolles, France
François Giroux
Affiliation:
Centre Commun CNET/SGS-THOMSON, 850 Rue Jean Monnet, 38921 Crolles, France
Wim Doedel
Affiliation:
Centre Commun CNET/SGS-THOMSON, 850 Rue Jean Monnet, 38921 Crolles, France
Get access

Abstract

TiN/Ti films employed as glue layers for a blanket/etchback W plug technology show a significant surface contamination after the W-etchback process. An Al film deposited directly on a contaminated TiN/Ti underlayer exhibits a very weak texture, increasing the susceptibility to electromigration. Reliability tests confirm that the electromigration performance of a TiN/AlCu/TiN/Ti metallization system with a W plug technology, is significantly inferior to interconnecs that do not employ this plug technology. To improve the electromigration performance of this metallization system, several TiN surface cleaning treatments were evaluated. Also, the impact of the implementation of refractory metal buffer layers, before Al deposition was investigated. Analysis was performed by means of several surface analysis techniques, Al texture measurements and wafer-level reliability tests. It has been demonstrated that the contamination needs to be removed completely, or to be covered by a refractory buffer layer in order to restore the Al texture and to recover the proper electromigration resistance.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 391: Symposium T – Materials Reliability in Microelectronics V , 1995 , 429
Copyright
Copyright © Materials Research Society 1995

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1 Vaidya, S. and Sinha, A.K., Thin Solid Films 75 253 (1981).Google Scholar
2 Attardo, M.J. and Rosenberg, R., J. Appl. Phys. 41 2381 (1970).Google Scholar
3 Tracy, D.P., Knorr, D.B., and Rodbell, K.P., J. Appl. Phys. 76 2671 (1994)Google Scholar
4 Park, H-H., Kwon, K-H., Lee, J-L., Suh, K-S., Kwon, O-J., Cho, K-I., and Park, S-C., J. Appl. Phys. 76 4596 (1994)Google Scholar
5 Horikoshi, H., Nogami, T. and Kaneko, Y., VMIC Proceedings 244 (1993).Google Scholar
6 Root, B.J. and Turner, T., IEEE IRPS 100, (1985)Google Scholar