Hostname: page-component-586b7cd67f-t8hqh Total loading time: 0 Render date: 2024-11-29T12:49:02.750Z Has data issue: false hasContentIssue false
  • English
  • Français

The Effect of Simultaneous Electron and Kr+ Irradiation on Amorphization of CuTi*

Published online by Cambridge University Press:  25 February 2011

J. Koike ,
P. R. Okamoto ,
L. E. Rehn  and
M. Meshii
J. Koike
Affiliation:
Materials Science Division, Argonne National Laboratory, Argonne, IL 60439 Dept. of Materials Science and Engineering, Northwestern University, Evanston, IL 60208
P. R. Okamoto
Affiliation:
Materials Science Division, Argonne National Laboratory, Argonne, IL 60439
L. E. Rehn
Affiliation:
Materials Science Division, Argonne National Laboratory, Argonne, IL 60439
M. Meshii
Affiliation:
Dept. of Materials Science and Engineering, Northwestern University, Evanston, IL 60208
Get access

Abstract

CuTi was irradiated with 1-MeV electrons and Kr+ ions simultaneously at temperatures from 10 to 423 K. Retardation of Kr+-induced amorphization was observed with simultaneous electron irradiation at 295 and 423 K. The retardation effect increased with increasing irradiation temperature and relative electron-to-Kr dose rate. In contrast, simultaneous irradiation below 100 K showed an additive effect of electron- and Kr+-induced amorphization. The results can be explained by the mobility point defects introduced by electron irradiation interacting with Kr+-induced displacement cascades.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 128: Symposium A – Processing and Characterization of Materials Using Ion Beams , 1988 , 339
Copyright
Copyright © Materials Research Society 1989

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Footnotes

*

The work is supported by DOE W-31-109-ENG-38 and NSF DMR-8411178.

References

REFERENCES

1. Seidman, D. N., Averback, R. S., Okamoto, P. R., and Baily, A. C., Mater. Rec. Soc. Proc., 51, 349 (1986).10.1557/PROC-51-349CrossRefGoogle Scholar
2. Koike, J., Okamoto, P. R., Rehn, L. E., Meshii, M., J. Non Cryst. Solids, 106, 230 (1988).10.1016/0022-3093(88)90265-7Google Scholar
3. Pedraza, D. F., Phys. Rev., 38, 4803 (1988).10.1103/PhysRevB.38.4803Google Scholar
4. Koike, J., Okamoto, P. R. and Meshii, M., Mater. Res. Soc. Proc., 74, 425 (1987).10.1557/PROC-74-425Google Scholar
5. Biersack, J. P. and Haggmark, L.G., Nucl. Inst. and Methods, 174, 257 (1970).10.1016/0029-554X(80)90440-1Google Scholar
6. Luzzi, D. E., Mori, H., Fujita, H. and Meshii, M., Acta Met., 34, 629 (1986).10.1016/0001-6160(86)90178-1Google Scholar