Hostname: page-component-5c6d5d7d68-sv6ng Total loading time: 0 Render date: 2024-08-18T05:27:27.051Z Has data issue: false hasContentIssue false
  • English
  • Français

The Effect of Thermal Annealing of Au Contacts on 6h-Sic and 4h-Sic

Published online by Cambridge University Press:  10 February 2011

D. T. Shi ,
W. Lu ,
H. Chen  and
W. E. Collins
D. T. Shi
Affiliation:
NASA/Fisk Center for Photonic Materials & Devices, Fisk University, Nashville, TN37208-3051
W. Lu
Affiliation:
NASA/Fisk Center for Photonic Materials & Devices, Fisk University, Nashville, TN37208-3051
H. Chen
Affiliation:
NASA/Fisk Center for Photonic Materials & Devices, Fisk University, Nashville, TN37208-3051
W. E. Collins
Affiliation:
NASA/Fisk Center for Photonic Materials & Devices, Fisk University, Nashville, TN37208-3051
Get access

Abstract

The annealing effects of gold contacts on SiC single crystal substrates have been investigated using SPM and XPS/AES. Ultra-thin Au films with thicknesses of 30 Å and 150 Å, respectively, were fabricated onto both 4H- and 6H-SiC substrates via rf sputtering. The Au/SiC systems were then undergone a series of annealing with temperatures ranging from 200 °C to 400 °C. This study reveals that the sputtering system can generally produce a thin film of uniformly distributed nano-meter sized granular particles. The size of the particles increases with both the thickness of the ultra-thin film and annealing temperature. The thicker Au film revealed pin-hole damages after 300 °C annealing and severe cracking and spalling after 400 °C. However, the thinner Au film only demonstrated the increase of particle sizes. The atomic ratio of gold to silicon in the surface region decreases with the increase of annealing temperature, which indicates the diffusion of gold into silicon carbide. No significant changes of the Schottky barrier heights have been found for Au contacts onto both 6H- and 4H-SiC in the annealing temperature range. After the 400 °C annealing, a noticeable SiO2/SiOx, peak was unveiled in the XPS spectra.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 512: Symposium F – Wide Bandgap Semiconductors for High Power, High Frequency , 1998 , 375
Copyright
Copyright © Materials Research Society 1998

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Porter, L. M., Davis, R. F., Mat. Sci. and Eng., B34, 83(1995)Google Scholar
2. Ioannou, D. E., Papanicolaou, N. A., and Nordquist, P. E. Jr., IEEE Trans. on Elect. Dev. ED–34, 1694 (1987).Google Scholar
3. Cree Research, Inc., 4600 Silicon Drive, Durham, NC 27703.Google Scholar
4. NIST XPS, NIST Database 20, National Institute of Standards and TechnologyGoogle Scholar
5. Waldrop, J. R., J. Appl. Phys., 75(9), 4548 (1994).Google Scholar
6. Porter, L. M., Davis, R. F., Bow, J. S., Kim, M. J., Carpenter, R. W., and Glass, R. C., J. Mater. Res., 10(3), 668 (1995).Google Scholar
7. Waldrop, J. R., Grant, R. W., Wang, Y. C., and Davis, R. F., J. Appl. Phys., 72(10), 4757 (1992).Google Scholar
8. Waldrop, J. R., Grant, R. W., Appl. Phys. Lett. 56(6), 557(1990).Google Scholar