Hostname: page-component-586b7cd67f-rdxmf Total loading time: 0 Render date: 2024-11-24T15:14:22.261Z Has data issue: false hasContentIssue false
  • English
  • Français

Fabrication of Boron Compensated Hydrogenated Amorphous Silicon Films with Significantly Improved Stability Using Plasma Enhanced Chemical Vapor Deposition Technique

Published online by Cambridge University Press:  15 February 2011

Mohan K. Bhan
Mohan K. Bhan*
Affiliation:
Microelectronics Research Center, Applied Sciences Complex-I, Iowa State University, 1925 Scholl Road, Ames, Iowa - 50011, USA.
Get access

Abstract

We have systematically investigated the effects of addition of sub-ppm levels of boron on the stability of a-Si:H films and p-i-n devices, deposited by PE-CVD technique. The films thus produced with appropriate amounts of boron, show a significant improvement in stability, when soaked under both AM 1.5 (short-term) as well as 10×sun (long-term) illumination conditions. The opto-electronic properties of the films are quite respectable It is concluded that boron compensates the native impurities by forming donor-acceptor pairs, which reduces the “fast” defects and hence the initial degradation of the films. It is also speculated that boron may also be improving the short-term stability, by reducing the recombination of light generated electrons and holes, by converting D° into D+ states. The long-term stability appears to get affected by hydrogen dilution which seems to reduce the amount of “slow” defects. As a result of B doping of i-layer, the initial conversion efficiency of the devices decreases. It is presumed that our devices may contain an enhanced level of boron impurity, than expected, making them as worse material and to degrade less.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 377: Symposium A – Amorphous Silicon Technology 1995 , 1995 , 45
Copyright
Copyright © Materials Research Society 1995

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Stabler, D. and Wronski, C., Appl. Phys. Lett. 31, 292 (1977).Google Scholar
2. Guha, S., Yang, J., Czubatyj, W., Hudgeus, S. and Hack, M., Appl. Phys. Lett. 42, 588 (1983)Google Scholar
3. Stutzmann, M., Jackson, W.B. and Tsai, C.C., Phys. Rev. B 32, 23 (1985).Google Scholar
4. Dalai, V.L. and Fuleihan, C., Proc. Mater. Res. Soc. 149, 601 (1989).Google Scholar
5. Yang, L. and Chen, L., Proc. Mater. Res. Soc. 336, 335 (1994).Google Scholar
6. Yang, L. and Chen, L., Appl. Phys. Lett. 63, 400 (1993).Google Scholar
7. Johnson, N., Nebel, C., Santos, P., Jackson, W. et al., Appl. Phys. Lett. 59, 1443 (1991).Google Scholar
8. Tsuda, S., Kuwano, Y. and Nakamura, N., Jpn. J. Appl. Phys. 26, 33 (1987).Google Scholar
9. Shirai, H., Hanna, J. and Shimizu, I., Proc. AIP 234, 203 (1991).Google Scholar
10. Yang, J., Xu, X. and Guha, S., Proc. Mat. Res. Soc. 336, 687 (1994).Google Scholar
11. Catalano, A., Bennett, M., Arya, R., Rajan, K. and Newton, J., Proc. of the 18th IEEE Photovoltaic Specialists Conf, (IEEE, NY, 1985) p. 1378.Google Scholar
12. Dalal, V., Bhan, M., Ping, E., Kaushal, S. and Leonard, M., Appl. Phys. Lett. 64, 1862 (1994).Google Scholar
13. Lee, S., Kumar, S. and Wronski, C., J. Non-Crst. Solids 114, 316 (1989).Google Scholar
14. See, for example, Hydrogenated Amorphous Silicon by Street, R. A. (Cambridge University Press, Cambridge, U.K., 1991) p. 317.Google Scholar