Hostname: page-component-586b7cd67f-2brh9 Total loading time: 0 Render date: 2024-11-29T09:38:15.144Z Has data issue: false hasContentIssue false
  • English
  • Français

Fabrication of two-dimensional photonic structure of titanium dioxide with sub-micrometer resolution by deep x-ray lithography

Published online by Cambridge University Press:  15 March 2011

Koichi Awazu ,
Makoto Fujimaki ,
Xiaomin Wang ,
Akihide Sai  and
Yoshimichi Ohki
Koichi Awazu*
Affiliation:
1CAN-FOR, National Institute of Advanced Industrial Science and Technology (AIST), Tsukuba Central 4, 1-1-1 Higashi, Tsukuba 305-8562, Japan
Makoto Fujimaki
Affiliation:
1CAN-FOR, National Institute of Advanced Industrial Science and Technology (AIST), Tsukuba Central 4, 1-1-1 Higashi, Tsukuba 305-8562, Japan
Xiaomin Wang
Affiliation:
1CAN-FOR, National Institute of Advanced Industrial Science and Technology (AIST), Tsukuba Central 4, 1-1-1 Higashi, Tsukuba 305-8562, Japan
Akihide Sai
Affiliation:
Department of Electrical Engineering and Bioscience, Waseda University, 3-4-1 Ohkubo, Shinjuku-ku, Tokyo 169-8555, Japan
Yoshimichi Ohki
Affiliation:
Department of Electrical Engineering and Bioscience, Waseda University, 3-4-1 Ohkubo, Shinjuku-ku, Tokyo 169-8555, Japan
*
*Author to whom correspondence should be addressed; electronic mail: k.awazu@aist.go.jp
Get access

Abstract

Two dimensional photonic crystals of titanium dioxide is expected to have many advantage compared with photonic crystals of semiconductors, e.g., silicon and GaAs. For example, low optical loss in the near infrared region used for optical communication, low thermal expansion, and its refractive index which is close to that for optical fiber are attractive advantages. However, it is difficult to create micro-nano structure in titanium dioxide because micro-fabrication technique for semiconductor is not available for titanium dioxide. As the first step we calculated photonic band gap of titanium dioxide rod-slab on SiO2. Also, band gap percent against thickness of the rod-slab was examined. Finally, we confirmed the most suitable structure of 2D photonic crystals. Deep x-ray lithography technique was employed for create a very deep and precise template of PMMA. Then, liquid-phase deposition was used to faithfully deposit a tightly packed layer of titanium oxide onto the template. Finally, the template is selectively removed to obtain a photonic nano-structure. We also calculate photonic band gap on the 3D-structure of TiO2. A template for the most appropriate structure was fabricated by the method proposed by Yablonovitch. By using of the same method, it was successful to obtain 3D structure of TiO2. Refractive index of obtained TiO2 followed by heating at 700°C was determined to 2.5 which is close to that for anatase phase.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 820: Symposia O/R – Nanoengineered Assemblies and Advanced Micro/Nanosystems , 2004 , R4.5
Copyright
Copyright © Materials Research Society 2004

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Muller, C. and Mohr, J., Interdiscip, Sci. Rev., 18, 273 (1993).Google Scholar
2. Cuisin, C., Chelnokov, A., Lourtioz, J.-M., Decanini, D., Chen, Y., J.Vac.Sci.Technol., B18, 3505 (2000).Google Scholar
3. Joannopoulos, J. D., Meade, R. D., and Winn, J. N., “Photonic Crystals: Molding the Flow of Light” (Princeton, New Jersey: 1995).Google Scholar
4. Johnson, Steven G. and Joannopoulos, J. D., “Block-iterative frequency-domain methods for Maxwell's equations in a planewave basis,” Optics Express 8, no. 3, 173–190 (2001), http://www.opticsexpress.org/abstract.cfm?URI=OPEX-8-3-173.Google Scholar
5. Yablonovitch, E. and Gmitter, T.J., Phys. Rev. Lett., 67, 2295 (1991).Google Scholar