Hostname: page-component-586b7cd67f-t7czq Total loading time: 0 Render date: 2024-11-25T00:30:52.893Z Has data issue: false hasContentIssue false
  • English
  • Français

Fracture in Thin Oxide Films

Published online by Cambridge University Press:  01 February 2011

D. F. Bahr ,
A. L. Olson ,
K. R. Morasch ,
M. S. Kennedy ,
D. Rodriguez Marek  and
A. Alamr
D. F. Bahr
Affiliation:
Mechanical and Materials Engineering, Washington State University, Pullman WA 99164
A. L. Olson
Affiliation:
Mechanical and Materials Engineering, Washington State University, Pullman WA 99164
K. R. Morasch
Affiliation:
Mechanical and Materials Engineering, Washington State University, Pullman WA 99164
M. S. Kennedy
Affiliation:
Mechanical and Materials Engineering, Washington State University, Pullman WA 99164
D. Rodriguez Marek
Affiliation:
Mechanical and Materials Engineering, Washington State University, Pullman WA 99164
A. Alamr
Affiliation:
Mechanical and Materials Engineering, Washington State University, Pullman WA 99164
Get access

Abstract

In thin film systems, failure often occurs via fracture mechanisms, with either through thickness cracking or interfacial delamination leading to failure of the device or layer. Measuring the stress at which fracture occurs in these thin film systems requires testing methods amicable to both the small scale of the films as well as the complex relationship between the mechanical properties of the film and the substrate. This paper will cover two oxide film systems, a piezoelectric ceramic (PZT) on platinum and passive oxide films (primarily Cr2O3) on stainless steels. Both will be tested with a bulk method (bulge testing in the case of PZT and circumferentially notched tensile bars for the stainless steel) and then with a nanoindentation method developed for testing fracture for hard coatings on soft substrates. The differences in stresses required for failure between the bulk and the nanoscale tests will be discussed in terms of differences in flaw population.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 795: Symposium U – Thin Films - Stresses and Mechanical Properties X , 2003 , U3.1
Copyright
Copyright © Materials Research Society 2004

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Hainsworth, S. V., Chandler, H. W., and Page, T. F., J. Mater. Res., 8, 1987 (1996).Google Scholar
2. Brotzen, F.R., Int. Mater. Rev., 39, 24 (1994).Google Scholar
3. Page, T.F. and Hainsworth, S.V. Surface and Coating Technology, 61, 201 (1993)Google Scholar
4. Weppelman, E. and Swain, M.V., Thin Solid Films, 286, 111(1996).Google Scholar
5. Pang, M. and Bahr, D.F., J. Mater. Res. 16, 2634 (2001).Google Scholar
6. Bahr, D.F., Kramer, D.E., Gerberich, W.W., Acta Mater. 46, 3605 (1998).Google Scholar
7. Chechenin, N.G., Bottiger, J., Krog, J.P., Thin Solid Films, 261, 228 (1995).Google Scholar
8. Rodriguez-Marek, D., Pang, M., and Bahr, D.F., Metall Mater Trans A. 34A, 1291 (2003).Google Scholar
9. Vlassak, J.J., Nix, W.D. J. Mater. Res. 7, 3242 (1992).Google Scholar
10. Eakins, L.M.R., Olson, B.W., Richards, C.D., Richards, R.F., and Bahr, D.F., J. Mater. Res., 18, 2079 (2003).Google Scholar
11. Hall, J.D., Apperson, N.E., Crozier, B.T., Xu, C., Richards, R.F., Bahr, D.F., and Richards, C.D., Rev.Sci. Instrument., 73, 2067 (2002).Google Scholar
12. Bonnotte, E, Delobelle, P, Bornier, L J. Mater. Res. 12, 2234 (1997).Google Scholar