Hostname: page-component-586b7cd67f-g8jcs Total loading time: 0 Render date: 2024-11-29T09:41:02.409Z Has data issue: false hasContentIssue false
  • English
  • Français

Fracture Tests Of Polysilicon Film

Published online by Cambridge University Press:  10 February 2011

W. N. Sharpe Jr. ,
B. Yuan  and
R. L. Edwards
W. N. Sharpe Jr.
Affiliation:
ME Department, Johns Hopkins University, Baltimore, MD 21218, sharpe@jhu.edu
B. Yuan
Affiliation:
ME Department, Johns Hopkins University, Baltimore, MD 21218, sharpe@jhu.edu
R. L. Edwards
Affiliation:
Applied Physics Laboratory, Johns Hopkins University, Laurel, MD 20723
Get access

Abstract

A new test approach is presented to measure the fracture toughness of thin films. The polysilicon specimen is a center-cracked panel that is 3.5 μm thick and 3 mm wide with a 100 μm long slot in the center. It is subjected to tensile loading, and the crack-opening displacement is measured by interferometry. The average toughness is 1.4 ± 0.65 MPa-m1/2.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 505 , 1997 , 51
Copyright
Copyright © Materials Research Society 1998

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1.Sharpe, W. N. Jr.Yuan, B., Vaidyanathan, R., and Edwards, R. L., “New Test Structures and Techniques for Measurement of Mechanical Properties of MEMS Materials”, Proceedings of the SPIE Symposium on Microlithography and Metrology in Micromachining II Austin, TX, pp. 78–91 (1996).Google Scholar
2.Sharpe, W. N., Jr.,, Yuan, B., Edwards, R. L., and Vaidyanathan, R., “Measurements of Young's modulus, Poisson's ratio, and Tensile Strength of Polysilicon”, Proceedings of the Tenth IEEE International Workshop on Microelectromechanical Systems, Nagoya, Japan, pp. 424–429 (1997).Google Scholar
3.Tsuchiya, T., Tabata, T., Sakata, S., and Tagi, Y., “Specimen Size Effect on Tensile Strength of Surface Micromachined Polycrystalline Silicon Thin Films,” Proceedings of the Tenth IEEE International Workshop on Microelectromechanical Systems, Nagoya, Japan, pp. 529–534 (1997).Google Scholar
4.Kahn, H., Stemmer, S., Nandakumar, K., Heuer, A. H., Mullen, R. L., Ballarini, R. and Huff, M. A., “Mechanical Properties of Thick, Surface Micromachined Polysilicon Films,” IEEE Micro Electro Mechanical Systems, pp. 343–348 (1996).Google Scholar
5.Dowling, N. E., Mechanical Behavior of Materials, Prentice Hall, (1993).Google Scholar
6.Sharpe, W. N., Jr. “Crack Tip Opening Displacement Measurement Techniques,” Experimental Techniques in Fracture, Society for Experimental Mechanics, Inc. Bethel, CT, Chapter 7, pp. 219–252, (1993).Google Scholar
7.Tada, H., Paris, P., and Irwin, G., “The Stress Analysis of Cracks Handbook”, Del Research Corporation, Hellertown, PA (1973).Google Scholar