Hostname: page-component-586b7cd67f-rcrh6 Total loading time: 0 Render date: 2024-11-20T08:28:57.481Z Has data issue: false hasContentIssue false
  • English
  • Français

Gas Phase Solid Freeform Fabrication of Saldvi of SiC Cermets

Published online by Cambridge University Press:  10 February 2011

J.E. Crocker ,
L. Shaw  and
H.L. Marcus
J.E. Crocker
Affiliation:
Institute of Materials Science, Department of Metallurgy and Materials Engineering, University of Connecticut, Storrs, CT 06268
L. Shaw
Affiliation:
Institute of Materials Science, Department of Metallurgy and Materials Engineering, University of Connecticut, Storrs, CT 06268
H.L. Marcus
Affiliation:
Institute of Materials Science, Department of Metallurgy and Materials Engineering, University of Connecticut, Storrs, CT 06268
Get access

Abstract

In this work, the solid freeform fabrication of cermets was explored. Using a laser-based approach, SiC was deposited by chemical vapor deposition from tetramethylsilane gas into powder layers of Cu, Mo, or Ni. The resulting structures were examined to observe the extent of reaction between the metal powders and the vapor deposited SiC. Silicide formation was observed, most readily with the Ni powder. The thermal expansion of the metals compared to that of the vapor deposited SiC affected the interfacial stresses generated in the cermets during fabrication.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 625: Symposium Y – Solid Freeform & Additive Fabrication – 2000 , 2000 , 211
Copyright
Copyright © Materials Research Society 2000

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1 Maxwell, J.L., Pegna, J., Messia, D., and DeAngelis, D., Proceedings of the Solid Freeform Fabrication Symposium, The University of Texas, pp.227–237, (1996).Google Scholar
2 Jakubenas, K.J., Sanchez, J.M., and Marcus, H.L., Materials and Design, 19, 11–18, (1998).Google Scholar
3 Crocker, J.E., Harrison, S., Sun, L., Shaw, L.L., and Marcus, H.L., JOM, 50, 21–23, (1998).Google Scholar
4 Wanke, M., Lehmann, O., Muller, K., Wen, Q., and Stuke, M., Science, 275, 1284–1286 (1997).Google Scholar
5 Harrison, S. and Marcus, H.L., Materials and Design, 20, 147–152 (1999).Google Scholar
6 Sun, L., Jakubenas, K.J., Crocker, J.E., Harrison, S., Shaw, L., and Marcus, H.L., Materials and Manufacturing Processes, 13, 883–907, (1998).Google Scholar
7 Touloukian, Y.S., Kirby, R.K., Taylor, R.E., and Desai, P.D., “Thermophysical Properties of Matter, Volume 12, THERMAL EXPANSION Metallic Elements and Alloys”, IFI/Plenum, New York, New York, 1975.Google Scholar
8 Gilp, B.F. and Desai, P.D., Properties of Intermetallic Alloys, Volume II Silicides, Metals Information Analysis Center, Purdue University, pp 15.1 and 16.1, (1994).Google Scholar
9 Baker, H. et al. , Alloy Phase Diagrams, ASM Handbook, Volume 3, ASM International, (1992).Google Scholar