Hostname: page-component-78c5997874-m6dg7 Total loading time: 0 Render date: 2024-11-18T11:19:57.005Z Has data issue: false hasContentIssue false
  • English
  • Français

Growth and Characterization of AlN on 6H-SiC Substrates

Published online by Cambridge University Press:  10 February 2011

M. Lekova ,
G. W. Auner ,
F. Jin ,
R. Naik  and
V. Naik
M. Lekova
Affiliation:
Dept. of Materials Science and Engineering, Wayne State University,Detroit, MI,
G. W. Auner
Affiliation:
Dept. of Electrical and Computer Engineering, Wayne State University, Detroit, MI.
F. Jin
Affiliation:
Dept. of Electrical and Computer Engineering, Wayne State University, Detroit, MI.
R. Naik
Affiliation:
Dept. of Physics, Wayne State University, Detroit, MI,
V. Naik
Affiliation:
Dept. of Physics, University of Michigan Dearborn, Dearborn, MI
Get access

Abstract

AIN/SiC structures are of current importance for the development of high temperature electronic devices. A systematic study of the growth and structure of AIN on Lely grown 6H-SiC was performed. The SiC substrates were chemically etched followed by thermal desorption at 875 °C under UHV conditions. AFM and RHEED images show the relative improvement in surface morphology following the cleaning procedure. AIN films were grown on 6H-SiC substrates using plasma source molecular beam epitaxy (PSMBE). Substrate temperatures were varied from 400 °C to 800 °C and deposition energies from 1 eV to 25 eV during AIN growth. The AIN crystal structure and topology were analyzed by RHEED and AFM. The AIN/SiC film microstructure are correlated with the quality of the SiC surface and the parameters of the AIN deposition process. Epitaxial growth of AIN(0002) was strongly dependent on the SiC surface quality and deposition energy. The highest quality AIN was achieved at growth temperatures of approximately 600 °C and 15 eV ion energy. Higher ion energy resulted in amorphous film growth.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 449: Symposium N – III-V Nitrides , 1996 , 245
Copyright
Copyright © Materials Research Society 1997

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Strite, S. and Morkoc, H., J. Vac. Sci. Technol. B10(4), 1237 (1992).Google Scholar
2. Edgar, J. H., J. Mater. Res. 7(1), 235 (1992).Google Scholar
3. Auner, G. W., Lenane, T. D., Ahmad, F., Naik, R., Kuo, P. K., Wu, Z., Wide Band Gap Electronic Materials, 329, Academic Publishers 1995, Printed in Netherlands.Google Scholar
4. Lin, M. E., Strite, S., Agarwal, A., Salvador, A., Zhou, G. L., Teraguchi, N., Rockett, A., Morcoc, H., Appl. Phys. Lett. 62(7), 702 (1993).Google Scholar
5. Ponce, F. A., Van de Walle, C. G., Northrup, J. E., Phys. Rev. B 53(11), 7473 (1996).Google Scholar
6. Rowland, L. B., Kern, R. S., Tanaka, S., Davis, R. F., J. Mater. Res., 8(9), 2310 (1993).Google Scholar