Hostname: page-component-586b7cd67f-rdxmf Total loading time: 0 Render date: 2024-11-22T23:50:27.988Z Has data issue: false hasContentIssue false
  • English
  • Français

High Temperature Mechanical Behavior of a Mo-Si-B Solid Solution Alloy

Published online by Cambridge University Press:  26 February 2011

Padam Jain  and
K. S. Kumar
Padam Jain
Affiliation:
padam_jain@brown.edu, Brown University, Division of Engineering, 182, Hope St., Providnce, RI, 02906, United States, 401 2258088
K. S. Kumar
Affiliation:
sharvan_kumar@brown.edu, Brown University, Division of Engineering, 182 Hope Street, Providence, RI, 02912, United States
Get access

Abstract

Multi phase alloys at the Mo-rich end of the Mo-Si-B system have drawn recent attention because of their high temperature performance capabilities. Previous studies on two- and three-phase alloys have confirmed the central role of the Mo-rich solid solution phase in affecting creep resistance and low-temperature toughness in these multiphase alloys. Thus, it is important to understand the intrinsic mechanical response of the matrix solid solution. In this study, compression and tensile tests were conducted over a nominal strain rate regime spanning 10-4 s-1 to 10-7 s-1 and temperature ranging from 1000°C to 1300°C in vacuum on a Mo-Si-B solid solution alloy (Mo-3Si-1.3B in at.%) that contained a low fraction (~5 %) of the T2 phase. The microstructure of the deformed specimens was examined to elucidate the underlying deformation mechanisms.

Keywords

Mostress/strain relationshipstrength
Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 980: Symposium II – Advanced Intermetallic-Based Alloys , 2006 , 0980-II06-03
Copyright
Copyright © Materials Research Society 2007

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

[1] Dimiduk, DM, Perepezko, JH, MRS Bulletin, (2003); 28: 639.10.1557/mrs2003.191Google Scholar
[2] Perepezko, JH, Sakidja, R, Kim, S, Dong, Z, Park, JS. In: Proceedings of the International Symposium on Structural Intermetallics, Jackson Hole, WY, TMS, Warrendale, PA; (2001). P. 505 Google Scholar
[3] Alur, AP, Chollacoop, N, Kumar, KS. Acta Mater (2004); 52: 5571.10.1016/j.actamat.2004.08.035Google Scholar
[4] Nieh, TG, Wang, JG, Liu, CT. Intermetallics (2001); 9: 73.10.1016/S0966-9795(00)00098-4Google Scholar
[5] Schneibel, JH. Intermetallics (2003); 11: 625.10.1016/S0966-9795(03)00044-XGoogle Scholar
[6] Schneibel, JH, Lin, HT. Materials at High Temperatures (2002); 19(1): 25.10.1179/mht.2002.19.1.004Google Scholar
[7] Kruzic, JJ, Schneibel, JH, Ritchie, RO. Scripta Mater (2004); 50: 459.Google Scholar
[8] Parthasarathy, TA, Mendiratta, MG, Dimiduk, DM. Acta Mater (2002); 50: 1857.10.1016/S1359-6454(02)00039-3Google Scholar
[9] Schneibel, JH, Liu, CT, Easton, DS, Carmichael, CA. Mater Sci Eng (1999); A261: 78.10.1016/S0921-5093(98)01051-XGoogle Scholar
[10] Alur, AP, Kumar, KS. Acta Mater (2006); 54: 385.10.1016/j.actamat.2005.09.013Google Scholar
[11] Ito, K, Ihara, K, Tanaka, K, Fujikura, M, Yamaguchi, M, Intermetallics (2001); 9: 591.10.1016/S0966-9795(01)00049-8Google Scholar
[12] Rosales, I, Schneibel, JH., Intermetallics (2000; 8: 885.10.1016/S0966-9795(00)00058-3Google Scholar
[13] Swadener, JG, Rosales, I, Schneibel, JH, MRS proceedings, Vol. 646, Materials Research Society, Warrendale, PA; (2001: N4.2.Google Scholar
[14] Northcott, L. Metallurgy of the Rarer Metals, vol. 5. London: Butterworth Scientific Publication; (1956).Google Scholar
[15] Jain, P, Alur, AP, Kumar, KS. Scripta Mater (2005); 54: 13.10.1016/j.scriptamat.2005.09.015Google Scholar
[16] Hosford, WF in Mechanical Behavior of Materials, Cambridge Univeristy press, New York, NY, (2005). P.102.10.1017/CBO9780511810930Google Scholar