No CrossRef data available.
Article contents
The Influence of Thermal Treatment on Monocrystalline CZT and Tellurium Inclusions
Published online by Cambridge University Press: 12 May 2015
Abstract
Cadmium Zinc Telluride (CZT), considered as a viable material for use in room temperature radiation detectors, has an undesired presence of tellurium inclusions in the bulk. Thermal treatment, in the form of annealing, has been utilized to test the viability of refining CZT into better detector material, either by the elimination of the tellurium inclusions or by the migration of the inclusions under a temperature gradient, but usually with a deterioration of electrical properties. We took infrared micrographs and current voltage (IV) characteristics of CZT samples prior to thermal treatment. We carried out 24-hour thermal treatments with a range of temperature from 100°C to 700°C to determine an optimal annealing temperature and to verify changes in the sizes, morphologies, and locations of the tellurium inclusions on the surfaces and within the crystal bulk of the CZT. The IV curves and resistivities prior to and after thermal treatments were compared, as were the infrared micrographs before and after annealing. Also, the changes in electrical properties of the samples with annealing conditions were compared against structural changes monitored at the same steps during the annealing process, in order to understand the effects of the thermal annealing to the radiation detector properties of the material. Correlations between the shape, size and position of inclusions and electrical properties of the material were attempted.
- Type
- Articles
- Information
- Copyright
- Copyright © Materials Research Society 2015
References
REFERENCES
Del Sordo, S., Abbene, L., Caroli, E., Mancini, A. M., Zappettini, A., and Ubertini, P., Progress in the Development of CdTe and CdZnTe Semiconductor radiation Detectors for Astrophysical and Medical Applications, Sensors, 9, 3491–3526, (2009).CrossRefGoogle Scholar
Szeles, C., and Driver, M. C., Growth and properties of semi-insulating CdZnTe for radiation detector applications, Proc. SPIE 3446, Hard X-Ray and Gamma-Ray Detector Physics and Applications, 2 (July 1, 1998).Google Scholar
Camarda, G.S., Andreini, K.W., Bolotnikov, A.E., Cui, Y., Hossain, A., Gul, R., Kim, K.H., Marchini, L., Xu, L., Yang, G., Tkaczyk, J.E., and James, R.B., Effect of extended defects in planar and pixelated CdZnTe detectors, Nuclear Instruments and Methods in Physics Research A, 652, 170–173 (2011)CrossRefGoogle Scholar
Szeles, C., Cameron, S. E., Ndap, J. O., and Reed, M.D., Advances in the high-pressure crystal growth technology of semi-insulating CdZnTe for radiation detector applications,IEEE Transactions on Nuclear Science, Vol. 51, no. 3, pp. 1242–1249 (2004).CrossRefGoogle Scholar
Rudolph, P., Non-stoichiometry related defects at the melt growth of semiconductor compound crystals—A review, Crystal Research and Technology, vol. 38, no. 7–8, pp. 542–554 (2003).CrossRefGoogle Scholar
Carini, G.A., Bolotnikov, A.E., Camarda, G.S., Wright, G.W., Li, L., and James, R.B, Effect of Te precipitates on the performance of CdZnTe (CZT) detectors, Applied Physics Letters, 88. 143515 (2006)CrossRefGoogle Scholar
Schlesinger, T.E., Toney, J.E., Yoon, H., Lee, E.Y., Brenett, B.A., Franks, L., and James, R.B., Cadmium zinc telluride and its use as a nuclear radiation detector material, Materials Science and Engineering, Vol. 32, no. 4, pp. 103–189 (2001).CrossRefGoogle Scholar