Article contents
Low Temperature ZnO TFTs Fabrication with Al and AZO Contacts for Flexible Transparent Applications
Published online by Cambridge University Press: 07 February 2013
Abstract
Zinc Oxide (ZnO) Thin-Film Transistors (TFTs) using Aluminum (Al) and Aluminum-doped zinc Oxide (AZO) as Source-Drain (S-D) contacts are reported. The fabrication process was carried out using five photolithography steps with a maximum processing temperature of 100 °C, which makes the process compatible with flexible/transparent applications. The AZO and ZnO films were deposited using Pulsed Laser Deposition (PLD). Aluminum was deposited using ebeam. The devices showed mobilities >10 cm2/V-s, threshold voltage in the range of 7 V and On/Off current ratios >105. The resistance analysis showed that AZO is a better contact with lower contact resistance as identified in the TFTs. The AZO and ZnO stacks characterized by UV-V shows an optical transmission >80 %.
- Type
- Articles
- Information
- MRS Online Proceedings Library (OPL) , Volume 1494: Symposium Z – Oxide Semiconductors and Thin Films , 2013 , pp. 299 - 303
- Copyright
- Copyright © Materials Research Society 2013
References
REFERENCES
- 4
- Cited by