Hostname: page-component-cd9895bd7-jn8rn Total loading time: 0 Render date: 2024-12-28T09:37:11.886Z Has data issue: false hasContentIssue false

Matrix Assisted Pulsed Laser Evaporation (Maple) of Polymeric Materials: Methodology and Mechanistic Studies

Published online by Cambridge University Press:  15 February 2011

A. Piqué
Affiliation:
SFA, Inc., Largo, MD 20774.
R. C. R. A. McGill
Affiliation:
Naval Research Laboratory, Washington, DC 20375.
D. B. Chrisey
Affiliation:
Naval Research Laboratory, Washington, DC 20375.
J. Callahan
Affiliation:
Naval Research Laboratory, Washington, DC 20375.
T. E. Mlsna
Affiliation:
Geo-Centers Inc., Ft. Washington, MD 20744.
Get access

Abstract

A new matrix assisted pulsed laser evaporation (MAPLE) technique has been developed at the Naval Research Laboratory, to deposit superior quality ultra thin, and uniform films for a range of highly functionalized polymeric materials. The MAPLE technique is carried out in a vacuum chamber, and involves directing a pulsed laser beam onto a frozen target, consisting of a polymer dissolved in a solvent matrix. The laser beam evaporates the surface layers of the target, where both solvent and polymer molecules are lifted into the evacuated gas phase. A solvent and polymer plume are generated incident to the substrate being coated. Si(111), and NaCl substrates coated with thin layers of polymer have been examined by a range of techniques including: optical microscopy, scanning electron microscopy and Fourier transform infra-red spectroscopy. Under optimum conditions the native polymer was transferred to the substrate without chemical modification as a highly uniform film.

The MAPLE technique offers a number of advantages over conventional polymer deposition techniques, including the ability to precisely and accurately coat a relatively large or small targeted area with an ultrathin, and uniform coating with sub monolayer thickness control. Conventional pulsed laser ablation techniques can be utilized for coating a limited number of polymers, but we have found that for highly functionalized materials the native polymer structure is almost completely lost in the process. In contrast, when the MAPLE conditions are optimized the deposition of even highly functionalized polymeric materials proceeds with little effect on the intrinsic polymer structure.

Type
Research Article
Copyright
Copyright © Materials Research Society 1998

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Koren, G., Appl. Phys. Lett. 50, 1030 (1987).Google Scholar
2. Misra, S.C.K., Ram, M.K.,. Pandey, S.S., Malhotra, B.D., and Chandra, A.. Appl. Phys. Lett. 60, 2697 (1992).Google Scholar
3. Hansen, S.G., and Robitaille, T.E., Lett. 52(1), 81 (1998). and References Therein.Google Scholar
4. Sirajuddin, M., and Reddy, P.J., Thin Solid Films 124, 149 (1985).Google Scholar
5. Blanchet, G. B., Fincher, C.R., Jackson, C.L., Shah, S.I., and Gardner, K.H., Science 262, 719 (1993).Google Scholar
6. Conklin, J.A., and Cotell, C.M., Pulsed laser deposition of collagen and apatite/collagen composite biocompatible thinfilms, in Advances in Coatings Technologies for Surface Engineering (Clayton, C. R.; Hirvonen, J. K.; and Srivatsa, A. R.), The Minerals, Metals, and Materials Society, Warrendale, PA, pp. 183194, 1997.Google Scholar
7. Cotal, H.L., Chrisey, D.B., McGill, R.A., and Mlsna, T.E., Deposition of polyepichlorohydrin thin films by pulsed laser ablation, Thin Solid Films, (in press).Google Scholar
8. Shen, M., and Bell, A.T., eds. ACS Symposium Series 108, Ameri. Chem. Soc., Washington. (1979).Google Scholar
9. Malhotra, B.D., Kumar, N., and Chandra, S., Prog. Polym. Sci. 12, 179 (1986).Google Scholar
10. Sutcliffe, E., and Srinivasen, R.J., Appl. Phys. 60, 3315 (1986).Google Scholar
11. Deshmukh, S., and Rothe, E.W., J. Appl. Phys. 66, 1370 (1989).Google Scholar
12. McGill, R.A., Abraham, M.H., and Grate, J.W., CHEMTECH, 24(9), 27 (1994.Google Scholar
13. McGill, R.A., Choosing polymer coatings for gas and liquid chemical microsensors. Proc. Society of Plastic Engineers Annual Technical Conference, May 1996, pp. 20802084.Google Scholar
14. McGill, R.A., Surface Warfare 21, 32 (1996).Google Scholar
19. Ballentine, D.S., D. S. et. al. Acoustic Wave Sensors: Theory, Design and Physicochemical Applications, Academic Press, MA, 1996.Google Scholar
16. Mlsna, T.E., Mowery, R., and McGill, R.A., The design of aromatic acid silicone polymers and their evaluation as sorbent coatings for chemical sensors. in Silicone in Coatings II Proceedings 24-26th March, 1998. Paint Research Association, Teddington, UK. ISBN 0950531944.Google Scholar
17. Pulsed Laser Deposition of Thin Solid Films Eds. Chrisey, D.B.; and Hubler, G. K. John Wiley & Sons, Inc. 1994.Google Scholar
18. Montaudo, G., Montaudo, M.S., Puglisi, C., and Samperi, F., Rapid Comm. In Mass Spec. 9, 1158 (1995).Google Scholar