Hostname: page-component-745bb68f8f-v2bm5 Total loading time: 0 Render date: 2025-02-04T18:44:56.403Z Has data issue: false hasContentIssue false
  • English
  • Français

Mechanical Behavior of Ceramic/SAM Bilayer Coatings

Published online by Cambridge University Press:  01 February 2011

Quan Yang ,
Guangneng Zhang ,
Kaustubh Chitre  and
Junghyun Cho
Quan Yang
Affiliation:
Department of Mechanical Engineering, State University of New York at Binghamton Binghamton, NY 13902, U.S.A.
Guangneng Zhang
Affiliation:
Department of Mechanical Engineering, State University of New York at Binghamton Binghamton, NY 13902, U.S.A.
Kaustubh Chitre
Affiliation:
Department of Mechanical Engineering, State University of New York at Binghamton Binghamton, NY 13902, U.S.A.
Junghyun Cho
Affiliation:
Department of Mechanical Engineering, State University of New York at Binghamton Binghamton, NY 13902, U.S.A.
Get access

Abstract

Ceramic/self-assembled monolayer (SAM) bilayer films can provide adequate protection and/or act as a multipurpose coating for microelectronics and MEMS applications, due to synergistic effects of the hybrid film structure. The organic SAM acts as a “template” for the growth of the ceramic film while the hard ceramic can provide protection from environmental and mechanical impact. To process the bilayer films, a low-temperature solution deposition technique (biomimetic process) is employed using phosphonate-based SAM and zirconium oxide precursors. A particulate zirconium oxide film is formed by enhanced hydrolysis of zirconium sulfate solutions in the presence of HCl at about 80°C, and its particle size and thickness effects are discussed. In addition, microstructure and micromechanics involved in the synthesis of both zirconia films and SAM are systematically assessed. Especially, mechanical properties such as Young's modulus and hardness are analyzed using a nanoindenter, as well as with the aid of theoretical models. Further, the substrate effects resulting from a large indentation depth relative to the film thickness are eliminated to obtain the “film-only” properties. This study also highlights the role of compliant SAM layer in forming a strain-tolerant bilayer film.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 844: Symposium Y – Mechanical Properties of Bio-Inspired and Biological Materials , 2004 , Y9.9
Copyright
Copyright © Materials Research Society 2005

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Srinivasan, U., Houston, M., Howe, R., and Roger, T., J. Microelectromechanical Systems, 7, 252–260 (1998).Google Scholar
2. Bishop, A. R. and Nuzzo, R. G., Curr. Opin. Col. Int. Sci., 1, 127–136 (1996).Google Scholar
3. Ulman, A., Chem. Rev., 96, 1533–1554 (1996).Google Scholar
4. Keller, S. W., Kim, H.-N., and Mallouk, T. E., J. Am. Chem. Soc., 116, 8817–8818 (1994).Google Scholar
5. Whitesides, G. M., Sci. Amer. Sept., 273, 146–149 (1995).Google Scholar
6. Agarwal, M., Deguire, M. R., and Heuer, A. H., J. Am. Ceram. Soc., 80 (12), 2967 (1997).Google Scholar
7. Wang, J., Yang, S., Liu, X., Ren, S., Guan, F., and Chen, M., Applied Surface Science, 221, 272 (2004).Google Scholar
8. Roddatis, V. V., Su, D. S., Beckmann, E., Jentoft, F. C., Braun, U., Krohnert, J., and Schlogl, R., Surface and Coatings Technology, 151–152, 63 (2002).Google Scholar
9. Yang, Q., Chitre, K., Salami, T. O., Oliver, S. R., and Cho, J., Paper No. IMECE2003–41700 in Proceedings of IMECE, 2 (ASME International Mechanical Engineering Congress and Exposition, Washington, D.C., 2003.), New York, NY, 2003.Google Scholar
10. Bill, J., Hoffmann, R. C., Fuchs, T. M., and Aldinger, F., Z. Metallkd., 93, 478 (2002).Google Scholar
11. Chitre, K., Yang, Q., Salami, T. O., Oliver, S. R., and Cho, J., in press, J. Electro. Mater. (2005).Google Scholar
12. Yang, Q., Salami, T. O., Chitre, K., Oliver, S. R. J., and Cho, J., MRS Proceedings, 791, 105–110 (2004).Google Scholar
13. Oliver, W. C. and Pharr, G. M., J. Mater. Res., 7 (6), 2765–2773 (1992).Google Scholar
14. Saha, R. and Nix, W. D., Acta Materialia, 50, 23–38 (2002).Google Scholar
15. Zhang, G. and Cho, J., unpublished result (2004).Google Scholar