Hostname: page-component-586b7cd67f-l7hp2 Total loading time: 0 Render date: 2024-11-26T22:19:34.149Z Has data issue: false hasContentIssue false
  • English
  • Français

Microstructural and Electrical Properties of Ferroelectric Capacitors with Pt/RuO2 Hybrid Electrodes

Published online by Cambridge University Press:  15 February 2011

H.N. Al-Shareef ,
Y.L. Chen ,
O. Auciello  and
A.I. Kingon
H.N. Al-Shareef
Affiliation:
Department of Materials Science and Engineering, NC State University, Raleigh, NC 27695–7919.
Y.L. Chen
Affiliation:
Department of Materials Science and Engineering, NC State University, Raleigh, NC 27695–7919.
O. Auciello
Affiliation:
MCNC, Electronic Technologies Division, RTP, NC 27909–2889.
A.I. Kingon
Affiliation:
Department of Materials Science and Engineering, NC State University, Raleigh, NC 27695–7919.
Get access

Abstract

Thin films of pb(Zr0.53Ti0.47)O3 (PZT) grown in our laboratory on RuO2 electrodes by the sol-gel process are characterized by high leakage currents and by the presence of a pyrochlore-type second phase. We have used a thin Pt interlayer between the PZT film and RuO2 bottom electrode to produce RuO2/PZT/100ÅPt/RuO2/SiO2/Si capacitor structures. It is found that use of such a Pt interlayer significantly reduces or eliminates the second phase in the PZT films, and lowers their leakage currents by more than four orders of magnitude. At the same time, the excellent resistance to polarization fatigue characteristic of the RuO2/PZT/RuO2 capacitors is maintained. The microstructures of PZT films grown on RuO2 electrodes with and without the 100Å Pt interlayer are compared. In addition, the voltage, temperature, and polarity dependence of the leakage current in these samples was measured. The data suggest that leakage current in these samples is most likely Schottky emission controlled. The barrier heights are determined to be about 0.80 and 0.73 eV for the top and bottom interfaces, respectively.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 361: Symposium I2 – Ferroelectric Thin Films IV , 1994 , 229
Copyright
Copyright © Materials Research Society 1995

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Bernstein, S.D., Wong, T.Y., Kisler, Y., and Tustison, R.W. J. Mat. Res. 8, 12 (1992).Google Scholar
2. Bellur, K.R., Al-Shareef, H.N., Rou, S.H., Gifford, K.D., Auciello, O., and Kingon, A.I., ISAF 92 Proceedings, 448 (1992).Google Scholar
3. Ramesh, R., Chan, W.K., Wilkens, B., Gilchrist, H., Sands, T., Tarascon, J.M., Keramidas, V.G., Fork, D.K., Lee, J., and Safari, A., Appl. Phys. Lett. 61, 1537 (1992).Google Scholar
4. Dat, R., Lichtenwalner, D.J., Auciello, O., and Kingon, A.I., Appl. Phys. Lett. 64, 2673 (1994).Google Scholar
5. Al-Shareef, H.N., Bellur, K., Auciello, O., and Kingon, A.I. Ferroelectrics 152, 85 (1994).Google Scholar
6. Al-Sharref, H.N., Kingon, A.I., Chen, X., Bellur, K.R., and Auciello, O., J. Mat. Res. 9, 2968 (1994).Google Scholar
7. Auciello, O., Gifford, K.D., and Kingon, A.I., Appl. Phys. Lett. 64, 2873 (1994).Google Scholar
8. Al-Shareef, H.N., Bellur, K., Auciello, O., and Kingon, A.I., Thin Solid Films 256, 73 (1995).Google Scholar
9. Al-Shareef, H.N., Bellur, K., Auciello, O., and Kingon, A.I., Appl. Phys. Lett. 66, (1995)Google Scholar
10. Schwartz, R.W., Assink, R.A., and Headly, T.J., MRS Symp. Proc. 243, 245 (1993).Google Scholar