Hostname: page-component-745bb68f8f-hvd4g Total loading time: 0 Render date: 2025-01-11T06:10:44.506Z Has data issue: false hasContentIssue false
  • English
  • Français

Microstructural Investigation of the Oxide Scale on Zr-2.5NB and its Interface with the Alloy Substrate

Published online by Cambridge University Press:  15 February 2011

V. Benezra ,
S. Mangin ,
M. Treska ,
M. Spector ,
G. Hunter  and
L.W. Hobbs
V. Benezra
Affiliation:
Department of Materials Science and Engineering, Massachusetts Institute of Technology, Cambridge, MA 02139
S. Mangin
Affiliation:
Department of Materials Science and Engineering, Massachusetts Institute of Technology, Cambridge, MA 02139
M. Treska
Affiliation:
Department of Materials Science and Engineering, Massachusetts Institute of Technology, Cambridge, MA 02139
M. Spector
Affiliation:
Department of Orthopedic Surgery, Harvard Medical School, Boston, MA 02115
G. Hunter
Affiliation:
Orthopaedic Division, Smith and Nephew, Inc., Memphis, TN 38116
L.W. Hobbs
Affiliation:
Department of Materials Science and Engineering, Massachusetts Institute of Technology, Cambridge, MA 02139
Get access

Abstract

Oxidized Zr-2.5Nb is being developed as an articular bearing surface for the femoral component in total joint arthroplasty. It has so far demonstrated superior wear performance against ultrahigh molecular weight polyethylene (UHMWPE) with respect to traditional articulating materials such as Co-Cr-Mo alloys. In this investigation, we used thermogravimetric analysis, transmission electron microscopy, and in situ x-ray diffraction techniques to study the microstructure and stress state of the oxide scale grown on Zr-2.5Nb.

The oxidation temperature not only determines the kinetics of oxidation but the morphology of the various oxidation products. We have identified the oxidation products of both phases of the two phase alloy and correlated them with the original alloy microstructure. These include not only monoclinic zirconia but also small amounts of tetragonal zirconia and a mixed oxide phase combining both zirconium and niobium. The alloy microstructure both influences the final oxidation products and is reflected in the microstructure of the oxide. The oxide scale itself has a predominantly columnar microstructure which extends from the oxide/metal interface to the outer surface of the oxide. In situ x-ray diffraction measurements revealed that the oxide scale is stressed in compression following cooling and exhibits strong crystallographic texture. The oxide/metal interface is continuous, without pores or voids which might be detrimental to oxide adhesion. In addition, we have identified a phase which develops at the interface between the beta-zirconium grains and the oxide. We have also identified amorphous regions within the oxide scale which serve as sinks for silicon and other impurity elements found in the alloy.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 550: Symposium GG/HH/II – Biomedical Materials-Drug Delivery, Implants and Tissue Engr , 1998 , 337
Copyright
Copyright © Materials Research Society 1999

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1) Davidson, J.A., Asgian, C.M., Mishra, A.K., and Zirconia, P. Kovaks. (ZrO2)-coated zirconium- 2.5Nb alloy for prosthetic knee bearing applications, in Bioceramics 5, Yamamuro, T., Kokubo, T., and Nakamura, T., eds. 1993, Kobunshi Kankokai: Kyoto, Japan. pp. 389–401 Google Scholar
2) Goodman, S.B., Davidson, J.A., Fornasier, V.L., and Mishra, A.K.. Histological response to cylinders of a low modulus titanium alloy (Ti-13Nb-13Zr) and a wear resistant zirconium alloy (Zr-2.5Nb) implanted in the rabbit tibia. J. Appl. Biomat. 4:331–339 (1993)Google Scholar
3) Patel, A.M. and Spector, M.. Tribological evaluation of oxidized zirconium using an articular cartilage counterface: a novel material for potential use in hemiarthroplasty. Biomaterials. 18:441–447 (1997)Google Scholar
4) Christel, P.S.. Zirconia: The second generation of ceramics for total hip replacement. Bull. Hosp. Joint. Dis. Orthop. Inst. 49:170–177 (1989)Google Scholar
5) Wadman, B., Lai, Z., Andren, H.-O., Nystrom, A.-L., Rudling, P., and Petterson, H.. Microstructure of oxide layers formed during autoclave testing of zirconium alloys, in Zirconium in the Nuclear Industry: Tenth International Symposium, ASTM STP 1245, Garde, A.M. and Bradley, E.R., ed. 1994, Amer. Soc. for Testing and Materials: Philadelphia, PA. p. 579–598.Google Scholar
6) Urbanic, V.F., Chan, P.K., Khatamian, D., and Woo, O.-T.. Growth and characterization of oxide films on zirconium-niobium alloys, in Zirconium in the Nuclear Industry: Tenth International Symposium, ASTM STP 1245, Garde, A.M. and Bradley, E.R., eds. 1994, American Society for Testing and Materials: Philadelphia, PA. p. 116–132.Google Scholar
7) Kofstad, P., High Temperature Corrosion. 1988, New York, NY: Elsevier Applied Science.Google Scholar