Hostname: page-component-586b7cd67f-dlnhk Total loading time: 0 Render date: 2024-11-20T06:31:36.292Z Has data issue: false hasContentIssue false
  • English
  • Français

Microstructures in Rapidly Solidified Gamma Titanium-Aluminum Alloys with Erbium Additions

Published online by Cambridge University Press:  22 February 2011

M. V. Kral ,
B. T. Bassler ,
W. H. Hofmeister  and
J. E. Wittig
M. V. Kral
Affiliation:
Department of Applied and Engineering Sciences, Materials Science Program, Vanderbilt University, Box 1593B, Nashville, TN 37235
B. T. Bassler
Affiliation:
Department of Applied and Engineering Sciences, Materials Science Program, Vanderbilt University, Box 1593B, Nashville, TN 37235
W. H. Hofmeister
Affiliation:
Department of Applied and Engineering Sciences, Materials Science Program, Vanderbilt University, Box 1593B, Nashville, TN 37235
J. E. Wittig
Affiliation:
Department of Applied and Engineering Sciences, Materials Science Program, Vanderbilt University, Box 1593B, Nashville, TN 37235
Get access

Abstract

Erbium additions of 0.25, 0.5, 1.0 and 2.0 atomic percent were incorporated into base alloys of 40 at.% titanium - 60 at.% aluminum by arc melting. Samples of 0.30g were electromagnetically levitated and melted and then rapidly solidified by double anvil splat quenching with liquid temperatures ranging from the liquidus temperature to near the maximum undercooling temperature for each alloy. Microstructures of TiAl with 0.25 and 0.5 at.% Er showed the presence of small erbium rich particles within γ grains as well as antiphase domain boundaries, while TiAl with 1.0 and 2.0 at.% Er showed no evidence of these features. These observations were correlated with solidification velocity measurements on levitated samples. Evidence for disordered primary solidification and a solid state disorder/order reaction is presented.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 364: Symposium L – High-Temperature Ordered Intermetallic Alloys–VI , 1994 , 817
Copyright
Copyright © Materials Research Society 1995

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Anderson, C.D., Hofmeister, W.H. and Bayuzick, R.J., Met. Trans. 23A, 2699 (1992).Google Scholar
2. Bassler, B.T., Krai, M.V., Hofmeister, W.H. and Bayuzick, R.J., These proceedings.Google Scholar
3. Hall, E.L. and Huang, S-C., Acta Met, 38(4) pp. 539–549 (1990).Google Scholar
4. McCollough, C., Valencia, J.J., Levi, C.G. and Mehrabian, R., Acta. Metall. 37 (5), pp. 1321–1336 (1989).Google Scholar
5. Boettinger, W.J. and Aziz, MJ., Acta Metall., 37 (12), pp. 3379–3391 (1989).Google Scholar
6. Aziz, M.J., J. Appl. Phys., 53 (2), pp. 1158–1168 (1982).Google Scholar
7. Froes, F. H. and Rowe, R. G. in Titanium Rapid Solidification Technology, edited by Froes, F. H. and Eylon, D. (Metall. Soc. of AIME, New Orleans, La., 1986) pp. 1–19.Google Scholar
8. Snow, D. B. and Giamei, A. F., in Titanium Rapid Solidification Technology, edited by Froes, F. H. and Eylon, D. (Metall. Soc. of AIME, New Orleans, La., 1986) pp. 153–164.Google Scholar
9. Bertero, G.A., Hofmeister, W.H., Robinson, M.B. and Bayuzick, R.J.; Met. Trans., 22A, pp. 2723–2732 (1991).Google Scholar
10. Sears, J.W., Lofvander, J.P.A., Wheeler, R., Stucke, M.A., Court, S.A. and Fraser, H.L., Sixth World Conference on Titanium, France 1988.Google Scholar