Hostname: page-component-cd9895bd7-jkksz Total loading time: 0 Render date: 2024-12-27T18:11:46.560Z Has data issue: false hasContentIssue false

Multi-scale Characterization and Modelling of Human Cortical Bone

Published online by Cambridge University Press:  26 February 2011

Marie-Christine Ho Ba Tho
Affiliation:
hobatho@utc.fr, Universite de Technologie de Compiegne, Genie Biologique, Centre de Recherches de Royallieu, BP 20529, Compiègne, FRANCE, 60205, France, 33 3 44 23 49 18, 33 3 44 20 48 13
Claude Stolz
Affiliation:
stolz@lms.polytechnique.fr, Ecole Polytechnique, Palaiseau, Laboratoire de Mécanique des Solides
Maximilien Vanleene
Affiliation:
maximilien.vanleene@utc.fr, Université de Technologie de Compiègne, Laboratoire de Biomécanique et Génie Biomédical
Sabine Bensamoun
Affiliation:
sabine.bensamoun@utc.fr, Université de Technologie de Compiègne, Laboratoire de Biomécanique et Génie Biomédical
Jean-Marc Treutenaere
Affiliation:
jm.treutenaere@wanadoo.fr, Polyclinique St Côme, Service Radiologie
Christian Rey
Affiliation:
Christian.Rey@ensiacet.fr, Université Paul Sabatier, Toulouse, CIRIMAT
Get access

Abstract

Mechanical properties of cortical human bone have been investigated for more than over three decades. The objectives of the present study were 1) to investigate the influence of multiscale structural characteristics of the bone tissue on its mechanical behavior and 2) to perform a micro-macro numerical modelling based on the experimental data. It should be noted that variations of the osteon lamellae elastic properties are higher (40%) at the microstructural level than those found at the macroscopic level (about 15%) for measurements performed in the same anatomical direction. Physico-chemical analyses found that organic components were found to be higher for femurs exhibiting lower mechanical properties. There is a consistency between changes observed at the different levels. These results contribute to a basic understanding of the multiscale mechanical behavior of human cortical bone.

Type
Research Article
Copyright
Copyright © Materials Research Society 2006

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Bensamoun, S., Tho, M.C. Ho Ba, Fan, Z., Rho, J.Y., 49th Annual Meeting, Orthopaedic Research Society, New Orleans (2003).Google Scholar
2. Tho, M.-C Ho Ba, Rho, J.Y., Ashman, R.B., in In vivo assessment of bone quality by vibration and wave propagation techniques. Part II Edited by Van der Perre, G., Lowet, G., Borgwardt, A., (ACCO Publishing, Leuven 1992), pp 738.Google Scholar
3. Bensamoun, S., Tho, M.-C. Ho Ba, Luu, S., Gherbezza, J.M, de Belleval, J.F. J Biomech. 37(4), 503 (2004).Google Scholar
4. Rho, J.Y, Roy, M.E, Tsui, T.Y, Pharr, G.M. Biomed Mater Res. 45(1):48 (1999).Google Scholar
5. Crolet, J.M, Racila, M., Mahraoui, R., Meunier, A., Comp. Meth and Biom. Eng, 8, 139, (2005).Google Scholar
6. Bornert, M., Stolz, C., Zaoui, A., J Mech. Phys. Solids. 44, 307 (1996).Google Scholar
7. Tho, M.C Ho Ba. Comp. Mech. Eng. Scien. 4:489 (2003).Google Scholar
8. Rho, J.Y, Roy, M.E, Tsui, T.Y, Pharr, G.M. Biomaterials. 18:1325 (1997).Google Scholar
9. Zysset, P.K., Guo, X.E, Hoffler, C.E, Moore, K.E., Goldstein, S.A. J. Biomech. 32, 1005 (1999).Google Scholar