Hostname: page-component-586b7cd67f-l7hp2 Total loading time: 0 Render date: 2024-11-25T17:46:01.790Z Has data issue: false hasContentIssue false
  • English
  • Français

Nanoparticles Synthesis by Air-Assisted Ultrasonic Spray Pyrolysis

Published online by Cambridge University Press:  17 March 2011

Shirley C. Tsai ,
Yu L. Song ,
C.Y. Chen ,
T. Kuan Tseng ,
Chen S. Tsai  and
Hong M. Lin
Shirley C. Tsai
Affiliation:
Department of Chemical Engineering, California State University, Long Beach, CA, U.S.A.
Yu L. Song
Affiliation:
Institute for Applied Science and Engineering Research, Academia Sinica, Taipei 115, Taiwan
C.Y. Chen
Affiliation:
Institute for Applied Science and Engineering Research, Academia Sinica, Taipei 115, Taiwan
T. Kuan Tseng
Affiliation:
Institute for Applied Science and Engineering Research, Academia Sinica, Taipei 115, Taiwan
Chen S. Tsai
Affiliation:
Institute for Applied Science and Engineering Research, Academia Sinica, Taipei 115, Taiwan
Hong M. Lin
Affiliation:
Department of Material Engineering, Tatung University, Taipei, Taiwan
Get access

Abstract

This paper presents new findings regarding the effects of precursor drop size and concentration on product particle size and morphology in ultrasonic spray pyrolysis. Large precursor drops (diameter >30 μm) generated by ultrasonic atomization at 120kHz yielded particles with holes. Precursor drops 6-9 μm in diameter, generated by an ultrasonic nebulizer at 1.65MHz and 23.5W electric drive power, yielded uniform spherical particles 150nm in diameter under proper control of heating rate and precursor concentration. Moreover, air-assisted ultrasonic spray pyrolysis at 120kHz and 2.3W yielded spherical particles of which nearly half were smaller than those produced by the ultrasonic spray pyrolysis of the 6-9 μm precursor drops, despite the much larger precursor drop sizes (28 μm peak diameter versus 7 μm mean diameter). These particles are much smaller than those predicted by the conventional one particle per drop mechanism, suggesting that a vapor condensation mechanism may also be involved in spray pyrolysis. It may be concluded that through this new mechanism air-assisted ultrasonic spray pyrolysis can become a viable process for mass production of nanoparticles.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 704: Symposium W – Nanoparticulate Materials , 2001 , W5.10.1
Copyright
Copyright © Materials Research Society 2002

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

[1] Messing, G.L., Zhang, Shi-Chang, and Jayanthi, G.V., “Ceramic Powder Synthesis by Spray Pyrolysis,” J. Am. Ceram. Soc., 76, 2707–2726, 1993.Google Scholar
[2] Milosevic, O.B., Mirkovic, M.J., and Uskokovic, D.P., “Characteristics and Formation Mechanism of BaTiO3 Powders Prepared by Twin-Fluid and Ultrasonic Spray-Pyrolysis Methods,” J. Am Ceramic Society, 79, 1720–1722, 1996.Google Scholar
[3] Tsai, S.C., Childs, P. and Luu, P., “Ultrasound-Modulated Two-Fluid Atomization of a Water Jet,” AIChE J., 42, 3340–3350, 1996; S.C. Tsai, US Patent # 5, 687, 905, 1997; S.C. Tsai, P. Luu, P. Childs, A. Teshome, and C.S. Tsai, “The Role of Capillary Waves in Two-Fluid Atomization, ” Physics of Fluids, 9, 2909-2918, 1997.Google Scholar