Hostname: page-component-586b7cd67f-2brh9 Total loading time: 0 Render date: 2024-11-25T13:59:52.075Z Has data issue: false hasContentIssue false

Natural Poly(Hydroxybutyrate-Hydroxyvalerate) Polymers as Degradable Biomaterials

Published online by Cambridge University Press:  15 February 2011

Cyril Chaput
Affiliation:
Biomedical Engineering Institute, Ecole Polytechnique, Montréal, Qc, CANADA;
L'Hocine Yahia
Affiliation:
Biomedical Engineering Institute, Ecole Polytechnique, Montréal, Qc, CANADA;
Amine Selmani
Affiliation:
Chemical Engineering Department, Ecole Polytechnique, Montréal, Qc, CANADA;
Charles-Hilaire Rivard
Affiliation:
Department of Surgery, Ste-Justine Hospital, Montréal, Qc, CANADA.
Get access

Abstract

Poly(ß-hydroxybutyrate-co-ß-hydroxyvalerate) have been recently proposed as degradable biomaterials for drug delivery systems, sutures, bone plates and short-term implants. Three PIBF\HV (7, 14 & 22 % HV) films were analyzed for in vitro cytotoxicity and aqueous accelerated degradation, in vivo degradation and tissue reactions. The PHB/HV materials and extracts elicit few or mild toxic responses, do not lead in vivo to tissue necrosis or abscess formation, but provoke acute inflammatory reactions slightly decreasing with the time. The degradation of PHB/HV polymers present low rates in vitro as well as in vivo. The weight loss rate generally increases with the copolymer composition (HV content) and ranges from 0.15–0.30 (in vitro) to 0.25 %day (in vivo). Compositional and physico-chemical changes in PHB/HV materials were rapidly detected during the accelerated hydrolysis, but were much slower to appear in vivo. The structural and mechanical integrity of PHB/HV materials tend to disappear early in vitro as well as in vivo. After 90 wks in dorsal muscular tissues of adult sheep, there was no significant dissolution of the PHBiIV polymer, 50–60% of the initial weight still remaining. PHB/HV polymers are biodegradable materials, either by hydrolysis or implantation, but with extremely low dissolution or degradation rates.

Type
Research Article
Copyright
Copyright © Materials Research Society 1995

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Brandl, H., Gross, R. A., Lenz, R W., Fuller, R. C.. In: Advances in Biochemical Engineering. Biotechnology. Vol.41, edited by Fiechter, A. (Springer-Verlag Berlin Heidelberg, 1990) pp7793.Google Scholar
2. Mahm, T., Bowald, S., Karacagil, S., Bylock, A., Scand, C. Busch.. J. Thor. Cardiovasc. Surg. 26, 9 (1992).Google Scholar
3. Mahm, T., Bowald, S., Bylock, A., Saldeen, T., Scand, C. Busch.. J. Thor. Cardiovasc. Surg. 26, 15 (1992).Google Scholar
4. Boeree, N.R., Dove, J., Cooper, J.J., Knowles, J., Hastings, G.W.. Biomaterials 14, 793 (1992)Google Scholar
5. Doi, Y., Kanesawa, Y., Kunioka, M., T. Saito. Macromolecules 23, 26 (1990).Google Scholar
6. Gogolewski, S., Jovanovic, M., Perren, S.M., Dillon, J.G., Hughes, M.K.. J. of Biomedical Materials Research, 27, 1135 (1993). This article also appears In Mat. Res. Soc. Symp. Proc. Vol 394Google Scholar