Hostname: page-component-78c5997874-s2hrs Total loading time: 0 Render date: 2024-11-17T20:14:21.086Z Has data issue: false hasContentIssue false
  • English
  • Français

The Nature of the Concrete-Steel Rebar Interface in Plain and Silica Fume Concrete

Published online by Cambridge University Press:  15 February 2011

Abla M. Zayed
Abla M. Zayed*
Affiliation:
Department of Civil Engineering and Mechanics, University of South Florida, Tampa; Florida 33620
Get access

Abstract

In this investigation the nature and morphology of the concrete-reinforcing steel interface is studied. The effect of the partial replacement of cement by silica fume on the interface microstructure was determined. The distribution profiles of percentage porosity, calcium hydroxide and unreacted cement from the interface towards the concrete bulk were measured using the scanning electron microscope operated in the back scattering mode. The findings indicate the similarities between the morphology of the concrete-steel interface and those reported earlier in the literature for the concrete-aggregate interface. Additions of silica fume resulted in a decrease of the interface porosity and calcium hydroxide content.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 245: Symposium K – Advanced Cementitious Systems: Mechanisms and Properties , 1991 , 341
Copyright
Copyright © Materials Research Society 1992

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Cady, P. D. and Weyers, R. E., Cement, Concrete and Aggregates CCAGDP, 5 (2), 81–87 (1983).Google Scholar
2. Mehta, P. Kumar and Gerwick, Ben C., Concrete International, 4 (10), 45–51 (1982).Google Scholar
3. Mehta, P. Kumar, Concrete: Structure. Properties and Materials, (Prentice-Hall, Inc., Englewood Cliffs, New Jersey, 1986), p. 85, 112.Google Scholar
4. Mehta, P. Kumar, 9th International Congress on the Chemistry of Cement, 1989, Vol III, pp. 113–121.Google Scholar
5. Scrivener, K. and Gartner, E., in Bonding in Cementitious Composites, edited by: indess, S. and Shah, S. P. (Materials Research Society Proceedings, 114, Pittsburg, PA 1988) pp. 77–85.Google Scholar
6. Scrivener, K., Bentur, A. and Pratt, P., Advances in Cement Research, 1 (4), 230–237(1988).10.1680/adcr.1988.1.4.230Google Scholar
7. Rosenberg, A. M. and Gaidis, J. M., 2nd International Conference on The Use of Fly Ash, Silica Fume, Slag and Natural Pozzolans in Concrete, Madrid, Spain, 1986.Google Scholar