Hostname: page-component-669899f699-qzcqf Total loading time: 0 Render date: 2025-04-28T11:46:43.806Z Has data issue: false hasContentIssue false
  • English
  • Français

New conductive IBAD buffer for HTS applications

Published online by Cambridge University Press:  18 March 2011

Karola Thiele ,
Sibylle Sievers ,
Juergen Dzick ,
Lars-Oliver Kautschor ,
Christian Jooss ,
Joerg Hoffmann  and
Herbert C. Freyhardt
Karola Thiele
Affiliation:
Institut fuer Materialphysik, Windausweg 2, 37073 Goettingen, Germany
Sibylle Sievers
Affiliation:
Institut fuer Materialphysik, Windausweg 2, 37073 Goettingen, Germany
Juergen Dzick
Affiliation:
Zentrum fuer Funktionswerkstoffe, Windausweg 2, 37073 Goettingen, Germany
Lars-Oliver Kautschor
Affiliation:
Institut fuer Materialphysik, Windausweg 2, 37073 Goettingen, Germany
Christian Jooss
Affiliation:
Institut fuer Materialphysik, Windausweg 2, 37073 Goettingen, Germany
Joerg Hoffmann
Affiliation:
Zentrum fuer Funktionswerkstoffe, Windausweg 2, 37073 Goettingen, Germany
Herbert C. Freyhardt
Affiliation:
Institut fuer Materialphysik, Windausweg 2, 37073 Goettingen, Germany Zentrum fuer Funktionswerkstoffe, Windausweg 2, 37073 Goettingen, Germany
Get access

Abstract

Biaxially aligned Indium Tin Oxide (ITO) thin films to be used as electrically conductive buffer layers were prepared by an Ion-Beam Assisted Deposition (IBAD) process on various substrates. Two Kaufman ion sources with 2.5 cm diameter were employed for the assisting and the sputtering beam, respectively. All deposited films revealed (001) oriented film growth with a strong in-plane alignment. The degree of the in-plane orientation was studied depending on the ion-beam parameters and the incident angle. Investigations (TEM and X-ray) of the texture evolution of these IBAD films during film growth were carried out. An in-plane texture of 12.6°FWHM for a 1 μm thick film has been achieved so far. The quality of the buffer has been demonstrated by the subsequent deposition of high-current carrying YBCO-films deposited by thermal coevaporation using a 3–5 nm thick Y2O3 interlayer. A jc of 0.76 MA/cm2 (77K, 0T) has been obtained for a 1 cm × 1 cm sample with ITO of 20° FWHM.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 689: Symposium E – Materials for High-Temperature Superconductor Technologies , 2001 , E8.2
Copyright
Copyright © Materials Research Society 2002

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable

References

REFERENCES

1. Iijima, Y., Hosaka, M., Tanabe, N., Sadakata, N., Saitoh, T, Kohno, O. and Takeda, K., Journal of Materials Research, 13 No. 11 (1998) 3106 Google Scholar
2. Dzick, J., Wiesmann, J., Hoffmann, J., Heinemann, K., Garcia-Moreno, F., Isaev, A., Freyhardt, H.C. and Lechner, W., IEEE Transactions on Applied Superconductivity 9 No. 2 (1999) 2248 Google Scholar
3. Dzick, J. et al., Proceedings of the EUCAS, Copenhagen 2001, to be published in Physica CGoogle Scholar
4. Wiesmann, J., Hoffamnn, J., Usoskin, A., Garcia-Morena, F., Heinemann, K. and Freyhardt, H.C., Applied Superconductivity, Inst. Phys. Conf. Ser. No. 148 (1995), 503 Google Scholar
5. Behrisch, R., Topics in Applied Physics, Vol.47, Springer Verlag (1981)Google Scholar
6. Wiesmann, J., Dissertation, Institut fuer Materialphysik, Universitaet Goettingen (1998)Google Scholar
7. Holesinger, T. et al., Proceedings of the Critical Current Meeting, Madison, MI, 1999 Google Scholar