Hostname: page-component-586b7cd67f-rcrh6 Total loading time: 0 Render date: 2024-11-29T11:56:51.804Z Has data issue: false hasContentIssue false

Optical Studies of The Uniformity of Thermally Induced In-Plane Strain in Thin Gallium Arsenide Films

Published online by Cambridge University Press:  22 February 2011

M. Taysing-Lara
Affiliation:
US Army Research Laboratory, Electronic and Power Sources Directorate AMSRL-EP-EF, Fort Monmouth, New Jersey 07703-5601
H. Shen
Affiliation:
US Army Research Laboratory, Electronic and Power Sources Directorate AMSRL-EP-EF, Fort Monmouth, New Jersey 07703-5601
M. Wraback
Affiliation:
US Army Research Laboratory, Electronic and Power Sources Directorate AMSRL-EP-EF, Fort Monmouth, New Jersey 07703-5601
J. Pamulapati
Affiliation:
US Army Research Laboratory, Electronic and Power Sources Directorate AMSRL-EP-EF, Fort Monmouth, New Jersey 07703-5601
M. Dutta
Affiliation:
US Army Research Laboratory, Electronic and Power Sources Directorate AMSRL-EP-EF, Fort Monmouth, New Jersey 07703-5601
Get access

Abstract

In-plane anisotropic strain can be employed in the design of a new class of optoelectronic devices, such as high contrast, polarization sensitive spatial light modulators. One of the key issues involved in realizing these devices is obtaining a controllable and uniform in-plane strain. We have studied the uniformity of thermally induced in-plane strain in MOCVD grown GaAs lift-off thin films mounted on LiTaO3 or CaCO3 substrates. The experiment exploits the straininduced splitting of the excitonic interband transition at low temperature through absorption measurements using a Ti-Sapphire laser focused to a spot size less than 100 μm. The polarization vector of the incident light was oriented along an axis which enhances both features. From the energy positions of these transitions, the magnitude as well as the type of the in-plane strain was determined. Topographic scans performed over a 1.4mm X 1.4mm area for the sample bonded to CaCO3, and along a 2 mm line for that bonded to LiTaO3 revealed variations in strain of less than 5%.

Type
Research Article
Copyright
Copyright © Materials Research Society 1994

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

[1] Shen, H., Pamulapati, J., Wraback, M., Taysing-Lara, M, and Dutta, M. To be appeared June 1994, IEEE Photonic Technology Letters.Google Scholar
[2] Lu, Y., Kuo, H.C., Shen, H., Taysing-Lara, M., Wraback, M, Pamulapati, J., Dutta, M., Kosinki, J. and Sacks, R.. Mat. Res. Soc. Symp. Proc. Vol. 300. 1993 Google Scholar
[3] Yablonovitch, E., Gmitter, T., Harbison, J.P., and Bhat, R. Appl. Phys. Lett. 51, 26 (1987)Google Scholar
[4] Joyce, M.J. and Dell, J.M. Phys. Rev. B 41, 7749 (1990)Google Scholar
[5] Shen, H., Wraback, M., Pamulapati, J., Newman, P.G., and Dutta, M., Phys. Rev.B,47,13933,(1993)Google Scholar
[6] We have used S11 = 1.175×10-12 cm2/dyn and S12 = 0.366×10-12cm2/dyn. See Adachi, S., J.Appl. Phys. 58, R1(1985).Google Scholar