Hostname: page-component-586b7cd67f-rdxmf Total loading time: 0 Render date: 2024-11-29T09:26:04.022Z Has data issue: false hasContentIssue false
  • English
  • Français

Optical Waveguides in Thermally Grown SiO2 on Si Using Nitrogen Ion Implantation

Published online by Cambridge University Press:  15 February 2011

S. P. Wong ,
E. Y. B. Pun ,
W. T. Lam  and
P. S. Chung
S. P. Wong
Affiliation:
Department of Electronic Engineering, The Chinese University of Hong Kong, Hong Kong.
E. Y. B. Pun
Affiliation:
Department of Electronic Engineering, The Chinese University of Hong Kong, Hong Kong.
W. T. Lam
Affiliation:
Department of Electronic Engineering, The Chinese University of Hong Kong, Hong Kong.
P. S. Chung
Affiliation:
Department of Electronic Engineering, City Polytechnic of Hong Kong, Hong Kong.
Get access

Abstract

Multi-energy nitrogen implantation into thermally grown SiO2 on silicon substrates has been performed and the optical wave-guiding properties of this structure has been studied. The implantation energy used was in Ie range of 40 KeV to 150 keV, and the doses used were typically 2×1016 to 2×10−2. The energies and doses were chosen to achieve relatively flat implanted nitrogen profiles. It is found that optical waveguides can be formed when the implanted nitrogen concentration is sufficiently high. Both prism-coupling technique and end-fire coupling technique were used to test the implanted waveguides fabricated. Many m-lines including dark modes were observed by the prism-coupling method. This structure is found to be very stable against thermal annealing and there is no significant change observed in the waveguiding properties even after annealing at 1000 °C for four hours. The waveguide loss was found to be typically 0.6 dB/cm before annealing and can be further reduced to about 0.3 dB/cm after annealing.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 244: Symposium J – Optical Waveguide Materials , 1991 , 375
Copyright
Copyright © Materials Research Society 1992

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

[1] King, G.D.H., Bone, M.C., Weiss, B.L., Weeks, D.W., Electron. Lett. 17, 897 (1981).10.1049/el:19810625CrossRefGoogle Scholar
[2] Glavas, E., Townsend, P.D., and Foad, M.A., Nucl. Instr. and Meth. B46, 156 (1990).10.1016/0168-583X(90)90689-RCrossRefGoogle Scholar
[3] Wilson, R.G., J. Appl. Phys. 57, 5006 (1985).10.1063/1.335275CrossRefGoogle Scholar
[4] Mahdavi, S.M., Chandler, P.J. and Townsend, P.D., J. Phys. D22, 1354 (1989).Google Scholar
[5] Garmire, E., Stoll, H., Yariv, A., Hunsperger, T.G., Appl. Phys. Lett. 21, 87 (1972).10.1063/1.1654301CrossRefGoogle Scholar
[6] Mentzer, M.A., Hunsperger, R.G., Zavada, J.M., Jenkinson, H.A., Gavanis, T.J., Appl. Phys. A12, 19 (1983).CrossRefGoogle Scholar
[7] Rao, E.V.K., J. Appl. Phys. 46, 955 (1975).10.1063/1.321625CrossRefGoogle Scholar
[8] Kulisch, J.R., Franke, H., Singh, A., Lessard, R.A., Knystautas, E.J., J. Appl. Phys. 63, 2517 (1988).10.1063/1.341032CrossRefGoogle Scholar
[9] Biersack, J.P. and Kallweit, R., Nucl. Instr. and Meth. B46, 309 (1990).10.1016/0168-583X(90)90718-ACrossRefGoogle Scholar
[10] Standley, R.D., Gibson, W.M., and Rodgers, J.W., Appl. Opt. 11, 1313 (1972)CrossRefGoogle Scholar
[11] Naik, I.K., Appl. Phys. Lett. 43, 519 (1983).10.1063/1.94423CrossRefGoogle Scholar
[12] Chandler, P.J., Zhang, L., and Townsend, P.D., Nucl. Instr. and Meth. B46, 69 (1990).CrossRefGoogle Scholar
[13] Okamura, Y., Yoshinaka, S., and Yamamoto, S., Appl. Opt. 22, 3892 (1983).10.1364/AO.22.003892CrossRefGoogle Scholar
[14] Chengyu, Wand, Ying, Tao and Shuchu, Wand, J. Non-Cryst. Solids 52, 589 (1982).Google Scholar