Hostname: page-component-78c5997874-g7gxr Total loading time: 0 Render date: 2024-11-18T08:37:10.916Z Has data issue: false hasContentIssue false

Physical Properties and Leachability of MLW Stream Containing Cr, Ni and Cd Immobilized in a Cement Matrix

Published online by Cambridge University Press:  26 February 2011

E. Zamorani
Affiliation:
Commission of the European Communities, Joint Research Centre, Ispra Establishment, 21020 Ispra (Va) - Italy
I. A. Sheikh
Affiliation:
Pakistan Atomic Energy Commission P.O. Box 1114 - Islamabad Pakistan (at Ispra, under a research grant from DG XII, CEC-Brussels)
M. Della Rossa
Affiliation:
Commission of the European Communities, Joint Research Centre, Ispra Establishment, 21020 Ispra (Va) - Italy
G. Serrini
Affiliation:
Commission of the European Communities, Joint Research Centre, Ispra Establishment, 21020 Ispra (Va) - Italy
Get access

Abstract

Cement samples containing variable amounts of Cr(III) or Ni(II) or Cd(II) as chloride admixtures present in a MLW stream from reprocessing of spent fuel were prepared under established procedure. Due to the high pH generated in the cement clinker hydration, respective metal hydroxides are formed and improve the physical characteristics of the cement matrix. An increase in the value of the compressive strength was observed when about 7% of the above elements were blended in cement. The increase depends on the nature of the element in the sequence Cr >Ni >Cd.

The leach tests confirm the formation of insoluble hydroxide presenting a low concentration in the leachate corresponding to 0.05, 0.004 and 0.052 mg.L−1 for Cr, Ni and Cd, respectively. On the other hand, the hydro-lyzed chloride ions seem to react with calcium with consequent increased degradation of the cement matrix.

Type
Research Article
Copyright
Copyright © Materials Research Society 1989

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Kernforschungszentrum Karlsruhe (FRG), Project of Fuel Reprocessing and Waste Handling, KfK-2940, March 1980.Google Scholar
2. Baes, C.F. and Mesmer, R.E., Hydrolysis of Cations (John Wiley-Inter-sciences, New York, 1976), p. 211.Google Scholar
3. Zamorani, E., Sheikh, I.A. and Serrini, G., to be published in Nucl. and Chem. Waste Management (1988).Google Scholar
4. Zamorani, E., Sheikh, I.A. and Serrini, G., to be published in Cement and Concrete Res. Journal (1988).Google Scholar
5. Zamorani, E. and Mazzocchi, N., J. of Eur. Sci, and Techn., 5(4), 741768 (1984).Google Scholar
6. Zamorani, E. and Blanchard, H., CEC-Luxembourg, EUR-11069 EN (1987).Google Scholar
7. Alford, N.McN., Rahman, A.A. and Salih, N., Cement and Concrete Res., 11, 235 (1981).Google Scholar
8. Zamorani, E., Nucl. Techn., 77, 313 (1987).CrossRefGoogle Scholar
9. Zamorani, E., Serrini, G. and Blanchard, H., Radioact. Waste Manage, and Nucl. Fuel Cycle, 7(1), 29 (1986).Google Scholar
10. Lea, F.M., The Chemistry of Cement and Concrete (Edwards Arnold Ltd., London, 3rd ed., 1970), p. 232.Google Scholar
11. Pourbaix, M. and Deltombe, E., Atlas of Electrochemical Equilibria in Aqueous Solutions, Pergamon Press, Oxford (1966), p. 256.Google Scholar
12. Zamorani, E., Riaz, M., Sheikh, I. and Serrini, G., Conditioning of hazardous industrial waste (inorganic/organic) in cement matrix, Int. Symp. on Management of Low and Intermediate Radioactive Wastes, Stockholm (Sweden), May 16–20, 1988.Google Scholar