Hostname: page-component-586b7cd67f-rcrh6 Total loading time: 0 Render date: 2024-11-25T20:55:07.940Z Has data issue: false hasContentIssue false

Rapid Thermal Annealing for Electrical Activation in the Fabrication of GaAs MESFET

Published online by Cambridge University Press:  22 February 2011

S.W. Choi
Affiliation:
Electronics and Telecommunications Research Institute, Taedok Science-Town, Korea
J.W. Yang
Affiliation:
Electronics and Telecommunications Research Institute, Taedok Science-Town, Korea
B.H. Koak
Affiliation:
Electronics and Telecommunications Research Institute, Taedok Science-Town, Korea
K.I. Cho
Affiliation:
Electronics and Telecommunications Research Institute, Taedok Science-Town, Korea
H.M. Park
Affiliation:
Electronics and Telecommunications Research Institute, Taedok Science-Town, Korea
Get access

Abstract

Rapid thermal annealing (RTA) has been employed for the electrical activation of shallow n-channel layer by Si+ implantation in the fabrication of GaAs MESFET. To prevent considerable outdiffusion of gallium and arsenic from GaAs substrate during annealing, encapsulating layers such as SiNx and SiNx/SiO2 are deposited. The SiNx/SiO2 double dielectric encapsulant is shown to be more effective to improve the electrical activation. Depending on RTA temperature between 900 and 950°C, the maximum activation efficiency exhibits 77% at the implanted energy of 70 keV and the dose of 5×1012 cm2. SIMS analyses show the reduction of the hydrogen contained in the silicon nitride and no outdiffusion of Ga and As during RTA. It also shows the sharp Si-profile after RTA at 950°C, 30 sec. The MESFET fabricated using activaton with RTA provides better transconductance than that with furnace-annealed activation.

Type
Research Article
Copyright
Copyright © Materials Research Society 1993

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Kuzuhara, M. and Nozaki, T., in Very High Speed ICs : Gallium Arsenide LSI, edited by Ikoma, Toshiaki (Academic Press, 1990) p. 361.Google Scholar
2. Kazior, T.E. and Tabatabaie-Alavi, K., Mater. Res. Soc. Symp. Proc. 52, 396 (1986).Google Scholar
3. Paulson, W.M., Legge, R.N. and Weitzel, C.E., J. Electron. Mater., 16, 187 (1987).Google Scholar
4. Braunstein, G., Zheng, L.R., Chen, S., Lee, S.T., Peterson, D.L., Ko, K.Y. and Rajeswaran, G., Mater. Res. Soc. Symp. Proc. 144, 379 (1989).Google Scholar
5. Souza, J.P. de, Sadana, D.K. and Hovel, H.J., Mater. Res. Soc. Symp. Proc. 144, 495 (1989).Google Scholar
6. Valco, G.J. and Kapoor, V.J., J. Electrochem. Soc. 134, 685 (1987).Google Scholar
7. Souza, J.P. de, Sadana, D.K., Baratte, H. and Cardone, F., Appl. Phys. Lett., 57(11), 1129 (1990).Google Scholar
8. Blaauw, C., J. Appl. Phys. 54(9), 5064 (1983).Google Scholar
9. Inada, T., Ohkubo, T., Sawada, S., Hara, T., and Nakajima, M., J. Electrochem. Soc. 125, 1525 (1978).Google Scholar
10. Lanford, W.A. and Rand, M.J., J. Appl. Phys. 49(4), 2473 (1978).Google Scholar
11. Xie, J.Z., Muraka, S.P., Guo, X.S., and Lanford, W.A., J. Vac. Sci. Technol. B7(2), 150 (1989).Google Scholar
12. Vanasupa, L.S., Deal, M.D. and Plummer, J.D., Appl. Phys. Lett., 55(3), 274 (1989).Google Scholar
13. Yang, J.W., ETRI Technical Report (1992).Google Scholar