Hostname: page-component-78c5997874-lj6df Total loading time: 0 Render date: 2024-11-19T06:26:16.054Z Has data issue: false hasContentIssue false
  • English
  • Français

Rie Passivation Layer Removal by Remote H-Plasma and H2/SiH4 Plasma Processing

Published online by Cambridge University Press:  15 February 2011

Hong Ying ,
J. P. Barnak ,
Y. L. Chen  and
R. J. Nemanich
Hong Ying
Affiliation:
Department of Electrical and Computer Engineering, North Carolina State University, Raleigh, NC 27695-8202
J. P. Barnak
Affiliation:
Department of Materials Science and Engineering, North Carolina State University, Raleigh, NC 27695-8202
Y. L. Chen
Affiliation:
Department of Materials Science and Engineering, North Carolina State University, Raleigh, NC 27695-8202
R. J. Nemanich
Affiliation:
Department of Physics, North Carolina State University, Raleigh, NC 27695-8202
Get access

Abstract

Remote H-plasma and H2/SiH4 plasma processes were studied as potential dry cleaning processes following reactive ion etching (RIE). The processes were compared to a process of UV/ozone followed by an HF dip. The native oxide from Si(100) substrates was removed with an RIE etch of CHF3/Ar. The RIE process produced ∼150Å of a continuous fluorocarbon (CFx) passivation layer on the Si surface. For the post-RIE-cleaning three approaches were studied and compared including (1) uv-ozone exposure followed by an HF dip, (2) remote H-plasma exposure, and (3) remote H2/SiH4 plasma exposure. Auger electron spectroscopy (AES) was used to investigate the surface chemical composition, and AFM was used to measure changes in surface roughness. All three processes showed substantial removal of the passivation layer. The CF× polymer was completely removed in less than 1 min for samples exposed to a 100W remote H-plasma at 15mTorr and 450°C. With the addition of ∼0.1% of SiH4, the remote H2/SiH4 plasma also showed increased removal of residual oxygen contamination. The surface roughness of the plasma processed surfaces increased slightly.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 386: Symposium O – Ultraclean Semiconductor Processing Technology and Surface , 1995 , 285
Copyright
Copyright © Materials Research Society 1995

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Oehrlein, G.S., Phys. Today. 39(10), 26 (1986)Google Scholar
2. Lou, J.C., Oldham, W.G., Kawayoshi, H., and Ling, P., J. Appl. Phys. 71, 3225 (1992)Google Scholar
3. Ephrath, L.M. and Bennett, R.S., J. Electrochem. Soc., 129, 1822 (1982)Google Scholar
4. Jaso, M.A., and Oehrlein, G.S., J. Vac. Sci. Technol. A6, 1397 (1988)Google Scholar
5. Potter, G. E., Morrison, G.H., Charvat, P.K., and Ruoff, A.L., J. Vac. Sci. Technol. B10, 2398 (1992)Google Scholar
6. Oehrlein, G.S., Scilla, G.J., and Jeng, S.J., Appl. Phys. Lett. 52, 907 (1988)Google Scholar
7. Reinhardt, K., Divincenzo, B., Yang, C.-L., Arleo, P., Marks, J., Mikulan, P., Gu, T., and Fonash, S., Mat. Res. Soc. Symp. Proc. vol.315, 267 (1993)Google Scholar
8. Gu, T., Ditizio, R.A., Fonash, S.J., Awadelkarim, O. O., Ruzyllo, J., Collins, R.W. and Leary, H.J., J. Vac. Sci. Technol. B12, 567 (1994)Google Scholar
9. Simko, J.P. and Oehrlein, G.S., J. Electrochem. Soc., 138, 277 (1991)Google Scholar
10. Cerva, H., Mohr, E.-G., and Oppolzer, H., J. Vac. Sci. Technol. B5, 590 (1987)Google Scholar
11. Schneider, T.P., Cho, J., Chen, Y.L., Maher, D.M., and Nemanich, R.J., Mat. Res. Soc. Symp. Proc. vol.315, 197 (1993)Google Scholar
12. Schneider, T.P., Montgomery, J.S., Ying, H., Barnak, J.P., Chen, Y.L., Maher, D.M., and Nemanich, R.J., Electrochemical Soc. Proc. vol PV94–7, 329 (1994)Google Scholar
13. Barnak, J., Ying, H., Chen, Y.L., and Nemanich, R.J., Mat. Res. Soc. Symp. Proc. (this volume)Google Scholar