Hostname: page-component-78c5997874-dh8gc Total loading time: 0 Render date: 2024-11-19T17:57:40.174Z Has data issue: false hasContentIssue false
  • English
  • Français

Thermal Analysis of Fresh and Mature Oil Paint Films: The Effect of Pigments as Driers and the Solvent Leaching of Mature Paint Films

Published online by Cambridge University Press:  28 February 2011

Christopher W. McGlinchey
Christopher W. McGlinchey*
Affiliation:
Department of Paintings Conservation, The Metropolitan Museum of Art, New York, NY
Get access

Abstract

The effect of titanium white, zinc white and lead white on the drying properties of poppy, walnut and linseed oil are analyzed by differential scanning calorimetry (DSC). All of the fresh films undergo complex thermal transitions between -100 and O°C. For some of the dried films subambient transitions that resemble glass transitions occur at about -30 O°C. After exposure to certain solvents, these sub-ambient transitions disappear or are reduced significantly. It is suggested that samples with diminished sub-ambient transitions become more brittle as a result of the loss of materials that act as plasticizers.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 185: Symposium G – Materials Issues in Art and Archaeology II , 1990 , 93
Copyright
Copyright © Materials Research Society 1990

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1 Prime, R.B., in Thermal Characterization of Polymeric Materials, edited by Turi, E.A. (Academic Press, Florida, 1981), pp. 435–563.Google Scholar
2 Ward, I.M., Mechanical Properties of Polymeric Materials, (Wiley, Chicester, 1983), p. 171.Google Scholar
3 Rudin, A., The Elements of Polymer Science and Encrineerinc (Academic Press, New York, 1982), p.380.Google Scholar
4 Boyer, R.F., Polymer Engineering and Science 8 (3), 161–172 (1968).Google Scholar
5 Hall, C., Polymer Materials, (Wiley, New York, 1989), pp. 40–49.Google Scholar
6 Solomon, D.H., The Chemistry of Organic Film Formers, (Kreiger, Florida, 1982), pp. 40–49.Google Scholar
7 Solomon, D.H. and Hawthorne, D.G., The Chemistry of Pgigments and Fillers, (Wiley, New York, 1983) p.62.Google Scholar
8 Stewart, W.J., in Film Forming Compositions, editors Meyers, R. and Long, J.S. (Dekker, New York, 1967), part I, pp. 211–223.Google Scholar
9 Solomon, D.H., ibid., pp. 58–59.Google Scholar
10 Stolow, N., in On Picture Varnishes and Their Solvents, (National Gallery of Art, Washington D.C., 1985), p. 60.Google Scholar
11 Mecklenburg, M.F., “Some Aspects of the Mechanical Behavior of Fabric Supported Paintings”, Report to the Smithsonian Institution, 1982.Google Scholar